Samsung Galaxy Tab 2019 T510 LCD & Digitizer Replacement

No video

Samsung Galaxy Tab 2019 T510 LCD & Digitizer Replacement

Рет қаралды 122,080

4 жыл бұрын

A Full LCD+Digitizer Replacement on a Samsung Tab 10.1 2019 T510 / T515
=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-
=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-
Tools that i use frequently that are Ali-express Affiliate linked
CPB Heat pad: s.click.aliexpress.com/e/68nLSbQ
This is the Blue Pad i always have on my videos usually set at 60 Oc
I use this to soften adhesive on mobile devices.
Heat Resistant Tape: s.click.aliexpress.com/e/dQ283f6
When using the heat gun near sensitive parts, its best to cover them
With this to protect them
Double Sided Black Tape: s.click.aliexpress.com/e/bO46kXwg
The usual tape i use on most repairs, on screens
Red Clear Tape: s.click.aliexpress.com/e/cK4DNmIU
For things that need more Stick!,usually on tablet digitizers
Phone Repair Tool Kit: s.click.aliexpress.com/e/bH1lqUe4
A Similar tool kit to mine, that i use for those random screws that you dont normally see
Hakko FX 951 Clone Station: s.click.aliexpress.com/e/b5YamiMs
My Soldering Station i use, so far it has been good
Quick 861DW Hot Air Station: s.click.aliexpress.com/e/bAdNJvNI
This was a purchase to learn a bit more in micro soldering
So far it has been a great purchase
Power Z USB Amp Tester: s.click.aliexpress.com/e/TlwI4w8
Advanced readouts of power draw on devices
Basic USB Amp Tester: s.click.aliexpress.com/e/cUjjwpDW
A Simple Amp tester to see if your charger is actually putting out power
Black Tweezers Set: s.click.aliexpress.com/e/I80EZbE
The Black Tweezers i use in my videos
Metal Pry Tool :s.click.aliexpress.com/e/ckqD1TNQ
This is the same as the metal pry tool i use, different brand printed on it
Pry Tool: s.click.aliexpress.com/e/y0dvtNW
A New Version of the pry tools
Basic Digital Microscope: s.click.aliexpress.com/e/beN6u068
This is the kit i purchased to do micro soldering, if you see a video
of me micro soldering it was captured on this cameras feed
Orico 120w 10 Port Charging Station: s.click.aliexpress.com/e/miqk2Le
The Charging station i use out the back, usually having multiple devices connected
Doesn't support Fast charging but still does a good job
One page i go to when I'm curious what new repair tools is Wozniak Store: s.click.aliexpress.com/e/9eDP9uy
The Gold and Black Iphone 4s Screw Mats Im using 90% of the time
s.click.aliexpress.com/e/mg7GyLA

Пікірлер: 226

@faustocastaneda3542 Жыл бұрын

There were so many mixed reviews I was a little scared to buy this.-I work 10 hour shifts kzfaq.infoUgkxAxiUS5CgVC3j8FwNOHt037zhsquGQpXv and I can watch lectures, jam out, and read articles all day and only use 30-40% of the battery.-The screen is beautiful and the touch is accurate-The camera is on the edge, making this perfect for Zoom calls (I also have the keyboard with the back piece)-It's super thin. The bulk of my iPad kept me from using it often-I never realized how lazy I was until this pencil. The button and flick action (volume up and down, next and back) mean I can kick back without having to lean forward to make changes. I feel like a witch.Only 1 real complaint if it can even be called that, it comes with one background in like 6 colors. It's easy enough to find new ones... but why so stingy?

@rickstechrepairs Жыл бұрын

cheers

@don4techy 4 жыл бұрын

Love your work and patience in explaining. I didn't expect you would place new screen over old one. Just needed to point that all but overall I enjoyed and learned more

@rickstechrepairs 4 жыл бұрын

Thank you for your kind comment

@KevinVennard Жыл бұрын

I really appreciate your video. I started off trying to replace just the digitizer (the outside glass) because my tablet was still responding to touch. I quickly figured out that separating the digitizer from the LCD is extremely difficult for DIYers. I then bought the LCS digitizer combo. From there I followed your step by step instructions. Everything turned out flawlessly. I used isopropyl alcohol and the heat gun just as you described. Thank you for giving me the confidence to do it myself.

@rickstechrepairs Жыл бұрын

Awesome work, good job replacing your tablets display!

@muratm.3090 3 жыл бұрын

that was perfect... done as it was explained... no problem occured... you just saved the day... thanks.

@rickstechrepairs 3 жыл бұрын

Excellent, well done on your screen swap

@TerjeSkjrpe 4 жыл бұрын

Thanks a lot. Great help.

@abhijitdas1185 4 жыл бұрын

Bought ur new cam. Now the vedio looks nice.,...

@robdebie4423 3 жыл бұрын

Hi Rick, thanks a lot for this video! I just repaired the tablet of my girlfriend and it went very easy with this video...

@rickstechrepairs 3 жыл бұрын

Glad it helped

@rooferization 4 жыл бұрын

Ok links for all the tools where do I get the LCD and touch screen from It's like rocking horse droppings in Europe.

@jasonblais1667 4 жыл бұрын

Great video! I was able to replace the screen myself. The only mistake I made was not reading the instructions on the B7000 glue.

@njokuchibuikem9119 4 жыл бұрын

Hey

@njokuchibuikem9119 4 жыл бұрын

Does it work with the same screen

@vsubhuti 3 жыл бұрын

what was your mistake so that we don't do the same

@jasonblais1667 3 жыл бұрын

@@vsubhuti oh hey. It’s been so long I forget. But if you get the glue read the instructions. Sorry I can’t help more.

@GREGELZZ 3 жыл бұрын

Thanks!, got one of these in for repairs today will be doing this tomorrow when parts arrive

@rickstechrepairs 3 жыл бұрын

Be careful the first one I did of there I accidentally damaged the LCD cable

@ooberonfire 3 жыл бұрын

@@rickstechrepairs Just changed my first one and am wondering if I damaged the cable, the screen is flickering or looks like it's scrolling. Was pretty sure I didn't damage anything though. Can I ask what was the result of you damaging it? did it not work at all or is the screen flickering? Thanks Rick. Great video by the way :)

@NyxT-GyreX 2 жыл бұрын

@Ricks Tech hello sir how did it got damage exactly because I just installed mine but the screen is black it won't show anything even though I check the LCD cable and it does not seem damage 🤔

@RitzRT 4 жыл бұрын

In case this bites anyone...the little daughter card that is transferred to the new screen/digitizer needs to be grounded to the metal metal back of the digitizer or you'll find that you have screen output but no digitizer input. It didn't work when double sided tape was separating it from the metal backing. Once I confirmed that the big trace on the back needed to grounded to the digitizer case, I secured it with a couple of small dabs of conductive epoxy instead of tape. Works like a charm now. Thanks for the informative video!

@joshuasantos1418 3 жыл бұрын

Where did you get that dabs at ?

@RitzRT 3 жыл бұрын

@@joshuasantos1418 It was some of this that I had left over: www.amazon.com/Permatex-21351-Electrically-Conductive-Defogger/dp/B000HBGKWE

@joshuasantos1418 3 жыл бұрын

RitzRT I did everything in the video but the screen not turning on do you think this is the problem?

@RitzRT 3 жыл бұрын

@@joshuasantos1418 Could be. If you press down on the little daughter board so it makes contact with the metal while it's powered on, do you get screen output?

@joshuasantos1418 3 жыл бұрын

RitzRT screen not turning on but the tablet is on

@siulolovaomesake6778 3 жыл бұрын

Thank you...you helped me to fix my tablet

@rickstechrepairs 3 жыл бұрын

Great

@danejurus69 4 жыл бұрын

If I don't have that type of glue what else can I use to secure the new screen in place?

@elizabethbennett899 4 жыл бұрын

Thanks heaps!

@njokuchibuikem9119 4 жыл бұрын

Hey can it work with the same screen

@xOxDarkzxOx 4 жыл бұрын

is it possible for you to link the item you bought from aliexpress coz i see a lot of em xD?

@HaleiwaGirl808 4 жыл бұрын

My son dropped his tablet and the glass did not break but the LCD underneath did. What exactly do I need to buy to replace it myself. I’ve watched the above video and know I can do it myself, I just want to make sure I get exactly what you got in your video. Thank you so much… A single mom who is broke LOL

@rickstechrepairs 4 жыл бұрын

you will be purchasing a " eplacement digitizer + Display"

@j.lietka9406 4 жыл бұрын

Think the battery might be bad. I noticed a couple small punctures in the battery, near the middle area of the hash lines. If you see small punctures, & smell something akin to rubbing alcohol, is the battery totally bad? Also the mini pcb, small j- or u-shaped flex cable, long screen flex cable, are gone! I will keep your video in mind, but it may not be worth fixing the road side find! Think the main logic board is intact. Thanks again sir.

@FloridaMan69. 3 жыл бұрын

very informative

@rickstechrepairs 3 жыл бұрын

Cheers

@Shawtyboy123456 4 жыл бұрын

Hey I followed everything but the volume button doesn’t work any idea what it could be?

@mariopodaru6803 4 жыл бұрын

Thanks for the detailed instructions. Everything was working well (at least I thought) until it was time to turn the screen over to see if it was on. Blank (black) screen. Re-did all the ribbon connections, still nothing. I can plug it into a PC and see it come up in the directory , so it's on. Without seeing it, is there something specific I should check that could be the reason? Any ideas would be appreciated. Thank you.

@vikki2013 4 жыл бұрын

Did you figure out the problem? I'm having the same issue 😭

@edgard2u 4 жыл бұрын

@@vikki2013 Me 3, bought the replacement at www.aliexpress.com/item/4001076183012.html?spm=a2g0s.9042311.0.0.4dd84c4daObJeq

@repsolal 3 жыл бұрын

@@edgard2u quite possible to damage the tablet when replacing a screen with battery still connected.......

@Tremenda3O5Loca 2 жыл бұрын

Anyone resolve this issue? I’m experiencing the same issue.

@xpertgamer2430 4 жыл бұрын

pls give me the link of the touch you have

@smd6906 2 жыл бұрын

Muy buen vídeo! En ese modelo se puede cambiar solo el cristal? Gracias!

@rickstechrepairs 2 жыл бұрын

cheers, if you arent experienced i would do LCD+Touchpanel

@smd6906 2 жыл бұрын

@@rickstechrepairs thank you very much for your answer and greetings

@laceyx3goodson Жыл бұрын

So I got the screen replaced. Touch was not working, so did a reset and it worked. Turned off the screen glued down turned back on and now no touch. Is the screen faulty or something I did? I got the screen off again and still not touch.

@jttime883 3 жыл бұрын

Rick, thank you for excellent video. The new digitizer I got, the main harness connector didnt come with a latch. When I put the ribbon in and held with finger, it didnt power up. Does it only work with that latch?

@rickstechrepairs 3 жыл бұрын

The latch is used to lock the ribbon cable in place and to push the cable to make a solid connection to the board Without the latch it won't make a good connection and usually won't work You can try and put some tape on the ribbon cable to pack out the size difference

@jttime883 3 жыл бұрын

@@rickstechrepairs Im returning the unit I got... Ill try again in future and order a new digitizer and hopefully the latches are all there. Again, thank you for great video, helped a lot.

@j.lietka9406 4 жыл бұрын

Really detailed how-to! Even tho you didnt take the whole tablet apart, the long ribbon cable connected to the screen assy, does that go thru the logic board to the back? Also, the "Exxxxx" # on the cable, is that the part number for it? Also, the new screen, did it come with a home button? &, could you have gotten the screen complete - with the mini pcb & ribbon cable? What a tedious replacement! Thanks again 🤓 also, the B-7000, thats a good adhesive to keep the new screen in place? Thanks shoulda asked - the old screen was just cracked? Did it still work? Did you keep it? 😁 sorry, little cheezy here

@rickstechrepairs 4 жыл бұрын

I can't remember where the cable runs sorry Home button doesn't come with screen and LCD B7000 is my go to stuff for sticking things Old damaged parts went to recycling

@j.lietka9406 4 жыл бұрын

@@rickstechrepairs thanks, just looked closely at the virtual home button! Found a damaged s/sung 10.1 tablet, & am watching how-to videos. Not sure if it works, tho, ad the back cover is a bit messed up. Want to get it at least plugged in! 🤓 it looks like the long ribbon goes thru the logic board support (thru a slot) then to the other side!

@j.lietka9406 4 жыл бұрын

@@rickstechrepairs sorry, its an sm-t517p model. Thanks 🤓 basically i find broken phones, tablets (this is my 1st samsung tablet find) mostly ipads, & mess with them.

@donostio1 2 жыл бұрын

Thank you for the instructions. When I opened the case it popped open and the LCD ribbon cable yanked out of the connector to the screen (breaking the connector). So, when with replacement screen didn't work I got a new LCD cable ribbon (assuming that I've damaged the cable) and opened up the next layer and replaced that. After assembling, this time I get through start up, but the screen is very low light and the touch screen isn't responsive. I re-booted a few times (volume down and power) but it's always the same. I've reconnected all the cables a few times. 100% charged. Any other things to try? Know issues? Can I force it to factory rest somehow, would that help?

@rickstechrepairs 2 жыл бұрын

this is a hardware issue, factory reset wont help. possibly damaged flex connector, or faulty display / digi

@priscillatackie6408 Жыл бұрын

Hey nice but should the cables red part be bent if not can I send it to so you can fix it

@rickstechrepairs Жыл бұрын

not sure sorry

@thelegendaryshannin 3 жыл бұрын

Great video, thanks. I'm curious about your heating pad, as I'm needing one myself. Can you recommend one? Thanks in advance!

@rickstechrepairs 3 жыл бұрын

have a watch of this video of mine :) kzfaq.info/get/bejne/Y713iLaSlrapnoE.html&ab_channel=RicksTech

@thelegendaryshannin 3 жыл бұрын

@@rickstechrepairs thanks mate

@rickstechrepairs 3 жыл бұрын

no worries

@christianbrendan9610 3 жыл бұрын

Sorry to be so offtopic but does anybody know a way to get back into an instagram account..? I was stupid forgot my login password. I would love any assistance you can give me.

@trippdouglas4467 3 жыл бұрын

@Christian Brendan instablaster :)

@Twinem 4 жыл бұрын

Can you give me a link to the exact screen you used . Thanks!

@rooferization 3 жыл бұрын

www.ebay.de/itm/LCD-Display-Touch-Screen-Digitizer-F%C3%BCr-Samsung-Galaxy-Tab-A-10-1-2019-SM-T510/254421048366?ssPageName=STRK%3AMEBIDX%3AIT&var=554042390202&_trksid=p2057872.m2749.l2649

@Tony-fc7nj 3 жыл бұрын

I just want screen replacement pls

@rooferization 4 жыл бұрын

I make repairs myself mate, I cant source a separate touchscreen it comes just as lcd/ touchscreen as a unit, costs more but better for the customer.

@rickstechrepairs 4 жыл бұрын

That's what I typically use myself for repairs LCD + digitizer

@julianabdala1995 4 жыл бұрын

Hi Rick thanks for the help. Followed your intructions. The screen works fine but the touch sensor isnt working. Any advice?

@rickstechrepairs 4 жыл бұрын

Double check the touch panels cable Possibly a dud touch panel also

@Monkeyfobic 3 жыл бұрын

Hi Rick I'm having the same issue I've checked the connections and still nothing., I've also looked online for a replacement touch pcb board but to no avail :(

@anhz52 4 жыл бұрын

Do you open it between the plastic and the frame or between the plastic and the glass ?

@rickstechrepairs 4 жыл бұрын

Between the Glass and the Plastic Frame ===========-Glass \\\\\\\\\\\\\\\\\\- Plastic Frame

@NickPappas-NP 2 жыл бұрын

What type of tape did you use for the daughter board for the touch input? Does it have adhesive on both sides and is it conductive? It seems to be different than the one that you mention in the description. I am having the issue of having normal screen output, but no touch input and I am suspecting that whatever secures the daughter board to the metal must be grounded.

@rickstechrepairs 2 жыл бұрын

i don't believe the pcb doesnt need to be grounded, just attached

@errolv 2 жыл бұрын

I think I have the same issue, Nick. I power up, lock screen is on. But I cannot get any touch response, even to "swipe up" to log on. I used Scotch double-sided tape to stick the daughter board on. I wondered about grounding, but Rick says that's not important here. Rick, any other suggestions?

@ClownWhisper 4 жыл бұрын

I have a question is it better just to replace the digitizer and LCD togetherI have a badly badly cracked digitizer or LCD is fine but if it's all the same I would just replace them both if you would suggest this please let me know the answer thank you very much for the video

@ClownWhisper 4 жыл бұрын

Watching further out in the video I see you say it is harder to replace just the digitizer? so I will alter the question to be is it so hard that it shouldn't be attempted or should I just go for it and try to replace the digitizer only do you have a video with that?

@danejurus69 4 жыл бұрын

@@ClownWhisper A screen usually is the glass plus the digitizer glued together so if you have a cracked screen but it still recognizes your touch, just buy a new screen/digitizer. It's very easy to install. Part costs around $25 to $30.

@ClownWhisper 4 жыл бұрын

@@danejurus69 I'm having a hard time figuring out how it separates I've done this before actually on a different brand and it worked fine but on my 2019 tab a t510 it's hard to tell if I come straight down to get under the glass or if I come in kind of at the sidethe way the whole assembly is put together it's not clear to see exactly

@ClownWhisper 4 жыл бұрын

@@danejurus69 while watching this video it looks easy to replace both

@fernandobaltazar955 4 жыл бұрын

Hi Rick I loved this video, but I replaced my LCD broke but still can get any image just a black screen, but reading one of your answer mentioned that I need to replace the digitizer and where I can Get it?? Thank you

@rickstechrepairs 4 жыл бұрын

If you are getting a black screen with a replaced display, either it's not connected well enough Needs the battery disconnected Or the new screen is no good

@fernandobaltazar955 4 жыл бұрын

@@rickstechrepairs What happen if I connected with the battery connected, there is a step to clear it, or just I can disconnected and do it again?? , thanks for your, is my daughter tablet.

@fernandobaltazar955 4 жыл бұрын

for your help

@danejurus69 4 жыл бұрын

Screen and digitizer come together as one part basically. Either you bought a faulty screen or you don't have all the ribbon cables and connections hooked up properly.

@vikki2013 4 жыл бұрын

Did you fix this issue? Just Did the repair and I'm having the same issue 😭

@iyfnationtv Жыл бұрын

I'm gonna give this a go for the first time. Let you know the results.

@rickstechrepairs Жыл бұрын

Good Luck

@kyrstytraynor9187 4 жыл бұрын

Is it possible to just replace the glass on this model? I have cracked the screen on mine, the LCD is working fine so thought I may have been able to just replace the glass? I have seen many (just glass screens) being sold online. If not, where is the best place to purchase a replacement? Thank you. Your video is very helpful.

@rickstechrepairs 4 жыл бұрын

nar, cant do glass only unless you buy some decent gear

@utubetrutharrowmichael-and9105 3 жыл бұрын

Hmmmm yeah unlike other models where the glass appears to be only glued on the very outside edge ... is the sm t510 - 515 glass glued entirely to the digitizer/LCD ... as they sell the part ... www.ebay.de/itm/114731475348 ... any info or direction to possibly look .. cheers ric ♥️🙏🍺

@theobediahproject1567 2 жыл бұрын

I have a Samsung Galaxy Tab a model number T387V I believe it's 2018 I'm going to replace the LCD and the touch screen I ordered and they arrived separate is there anything I need to do before I install them separately?

@rickstechrepairs 2 жыл бұрын

not familiar with the model, so i dont have suggestions

@dustinjohnson6326 3 жыл бұрын

Do you know if this is the same for the T517P model?

@rickstechrepairs 3 жыл бұрын

I would assume by model number it would be extremely similar

@xusish 3 жыл бұрын

Hi, does it need to be isopropyl or can other alcohol/dissolvents be used as well (acetone?)

@rickstechrepairs 3 жыл бұрын

havent tried any other solvents sorry but i know isopropyl is safe on electronics, just don't get in to LCD displays or on rubber

@xusish 3 жыл бұрын

@@rickstechrepairs thanks

@r.lalhriathlualelhchhun 9 ай бұрын

Is there any samsung galaxy tab A 10 only A 10 guys ?

@kierbernardino2822 3 жыл бұрын

i have the same unit samsung tab a 10.1 my screen is fine and tab works well no problem using it, however the sides/corners are raised. is this okay? or do i need to go to shop and replaced? an answer would be a great help thank you!

@rickstechrepairs 3 жыл бұрын

That sounds like an expanded battery

@kierbernardino2822 3 жыл бұрын

@@rickstechrepairs hi, should i go to shop get replaced my battery?

@TheRicky664 4 жыл бұрын

Can you do just the digitizer or is it all glued the whole screen I mean??

@rickstechrepairs 4 жыл бұрын

The Whole screen is glued, so i would go the path of LCD+Digitizer as one replacement part

@VPGMATCHDAYS 3 жыл бұрын

Hi. At 3 mins 25 secs can any help and tell the correct part for the smaller flex what stuck on the back of the lcd? Cheers

@rickstechrepairs 3 жыл бұрын

sorry, i cant make it out for you

@NeolithGrey Жыл бұрын

Is that conductive double-sided tape that you're using at 7:40?

@rickstechrepairs Жыл бұрын

the red tape there is just regular old double sided tape

@khairulizzat95 4 жыл бұрын

Can you give the link where to get the lcd part?

@danejurus69 4 жыл бұрын

Search the model name and number on ebay or Amazon.

@chrisg9117 3 жыл бұрын

I am having some issues on the same model where the new or old screen will not show a display now. Any suggestions?

@rickstechrepairs 3 жыл бұрын

check flex connector that goes from the screen to the mainboard. make sure battery is disconnected when you do that

@cbozz7063 Жыл бұрын

i repaired mine with an aftermarket screen from ebay, but the screen brightness is not as bright as the original. its very low. Did you have this issue?

@rickstechrepairs Жыл бұрын

its usually a challenge to find quality replacement parts

@stinsonstinson2085 3 жыл бұрын

What is this fluid called? Nice Video

@rickstechrepairs 3 жыл бұрын

Isopropyl alcohol

@showtekaka 2 жыл бұрын

Do the flex cables break easily? It was working but before i taped the PCB component down wanted to make sure screen turned on which it did. So i disconnected everything and taped down that and reconnected all the cables back now the screen wont work. Any suggestions?

@rickstechrepairs 2 жыл бұрын

they can tear, they arent super strong, apart from disconnect and reconnect i cant suggest anything more sorry

@bruceandtrishgrummett5077 4 ай бұрын

My same tablet has quit. I did all the things for a black screen. Do you know where in the physical tablet the photos are stored so i can remove that part and try to retrieve the photos?

@rickstechrepairs 4 ай бұрын

I don't have the knowledge on how to do it sorry but it's an extremely technical procedure

@abdulrafy8457 2 жыл бұрын

Where did you buy the new screen digitizar and lcd from plz give link

@rickstechrepairs 2 жыл бұрын

AliExpress or local sellers

@JoelWallage8179 4 жыл бұрын

where can you get a new digitizer to LCD PCB and ribbon?

@rickstechrepairs 4 жыл бұрын

Aliexpress

@kkay1341 2 жыл бұрын

Are people doing a digitizer only replacement on the 2019 model?

@rickstechrepairs 2 жыл бұрын

there would be but that would require more expensive equipment to do it

@darlingomez9482 2 жыл бұрын

Hi ricks. I would like to ask. Since the LCD was just pulled out though its still fine. What should I do to put it back?? The lcd just got disconnect

@rickstechrepairs 2 жыл бұрын

i would think you just need to connect it back up, skip to the part of the video doing the reinstall of the new screen

@darlingomez9482 2 жыл бұрын

@@rickstechrepairs thnk u very much n sorry for late response

@SMILE_Evil 4 жыл бұрын

Have followed your video and had a go fixing my smt510 samsung tablet did everything the same but still not turning on no screen showing have charged device could u possibly be ably to help if send photo?thanks

@rickstechrepairs 4 жыл бұрын

No sorry I no longer have this device

@vikki2013 4 жыл бұрын

Did you find a fix? I am having the same problem 😭

@jurismika 3 жыл бұрын

Samething. Give us a link where you bought that screen replacement

@rickstechrepairs 3 жыл бұрын

Just a local purchase to me

@athleteman32 3 жыл бұрын

Where did you order the screen and digitizer? That's what a lot of viewers are wondering.

@rickstechrepairs 3 жыл бұрын

purchased locally

@FrankieWellman Жыл бұрын

I have this tablet and I need to remove the battery and have it work only when plugged in. Would you be able to show how I could do this?

@rickstechrepairs Жыл бұрын

no sorry i dont have any on hand to show with

@njokuchibuikem9119 4 жыл бұрын

Hey does the tablet work after u plug the thing back in and attach the same screen not the new one?

@repsolal 3 жыл бұрын

yes unless you damaged the screen taking it off........

@dutcharjo 3 жыл бұрын

Could you also show how to just replace the digitizer instead of the complete screen? I want to know if that is possible. I have ordered a replacement digitizer but have not managed to get the backcover of the tablet. And the repairshop says this tablet can only the complete lcd+digitizer.

@rickstechrepairs 3 жыл бұрын

Hi, Im doubtful I could do a video on digitizer only as I only do digitizer+LCD on this model

@dutcharjo 3 жыл бұрын

@@rickstechrepairs ok. I cannot see in the video whether you put the tool from the top of the tablet under the screen or on the side of the tablet. I tried to get the backcover of the tablet, but was not successfull so far. But perhaps, I did it completely the wrong way.

@tselios5623 2 жыл бұрын

I did it all just like that. I finished I tried it and it worked normally. before I put the glue stopped working, what could be wrong?

@rickstechrepairs 2 жыл бұрын

check digitizer cable and flex cable where it connected to the mainboard

@abduljabbarjabbarlike Жыл бұрын

I saw your video, I hv same tablet but front glass screen cover become a separate his glue leave his strength what shall I do

@rickstechrepairs Жыл бұрын

i would reglue with B7000 Frame adhesive

@abduljabbarjabbarlike Жыл бұрын

@@rickstechrepairs ok thanks my dear on precious opinion

@wQ3LL 3 жыл бұрын

Good tutorial. But I have an issue. Touch is recognized but swiping gestures are not. Any ideas why?

@rickstechrepairs 3 жыл бұрын

Not sure on that sorry

@wQ3LL 3 жыл бұрын

@@rickstechrepairs I noticed that swiping is working if I apply pressure to the edges of the screen?

@jenniferbennett28 4 жыл бұрын

did this got my kids screen working and as i fliped it a accidentally pulled out the lcd cable ribbon i put it back in now theres sound but the screen is black did i break the screen ribbon

@rickstechrepairs 4 жыл бұрын

It's possible.it was torn from the LCD itself, even a tear so small it doesn't look like anything has happened If you still have the cracked screen to test, give that a shot

@vikki2013 4 жыл бұрын

Did you fix this issue? I'm having the same problem.

@Omme1983 2 ай бұрын

Hello everyone, can someone perhaps help me? The new display is not working even though I have connected everything. I suspect it has something to do with the silver adhesive strips on the back of the display, as the new display doesn't have any. There are black contact points on the circuit board at the corresponding spots. Thank you in advance for any support. :)

@truedaystar 4 жыл бұрын

I just ordered a digitizer (front glass) for a sm-t510 - It looks pretty simple to separate the broken one from the LCD ?? If I was doing this as a business I would not think twice of charging the customer more for the part to save my time, but my LCD is fine, the glass digitizer just took a tumble. 25$ v/s 70$ LCD. BTW: Thanks for your video

@truedaystar 4 жыл бұрын

@Mike41 I sent the glass back too. and ordered the lCD combo, I got it, and when I plugged the two up, I think the data cable from the tablet to the screen got distorted, it has a little hump in the contact. not sure if something got under it or what. I wound up sending the screen combo back to amazon and just getting a new tablet, someday I might get brave and try again. it's not for the faint hearted to attempt but for right now I need a tablet and not a project. All in all this looks like a simple repair, I am worried I damaged the tablet electronics.

@danejurus69 4 жыл бұрын

A new screen/digitizer shouldn't cost more than $35.

@nextecoleader 2 жыл бұрын

What Happens If You Remove the Touchscreen Digitizer While the Tablet is Still Turned On? I'm replacing an unresponsive touchscreen digitizer so I am unable to power down the unit.

@rickstechrepairs 2 жыл бұрын

i would keep digging until you get to the battery and disconnect it

@leonardocruz8769 3 жыл бұрын

what would be the approximate price please

@rickstechrepairs 3 жыл бұрын

For the whole job or just the part?

@joshuahopf6329 4 жыл бұрын

Anyone know where i can buy a pcb preferably in Australia? Threw my old lcd/digitizer away since it was badly smashed then new one turns up and i need it 😭

@rickstechrepairs 4 жыл бұрын

i hope you dont mean PCB as in mainboard :( for something like that i would be looking at getting a damaged second hand one off ebay

@joshuahopf6329 4 жыл бұрын

@@rickstechrepairs no the little one stuck to the back of the lcd

@SushiMonkey 3 жыл бұрын

did you ever find a place that has that little board? im in the same situation

@SushiMonkey 3 жыл бұрын

i got the screen to turn on but i have no touch inputs. can anyone help me? do i need to buy a new daughter board and if so where can i buy just that part from?

@rickstechrepairs 3 жыл бұрын

Double check the ribbon cable for the digitizer Remove and reseat

@SushiMonkey 3 жыл бұрын

@@rickstechrepairs i ordered a whole new broken tablet and took the digitizer off and the cable. i tested them before i took it off the broken tablet i got for parts. they worked so when i put it on the new screen i have i still cant get any touch functions to work at all. if you can help i would be really greatful. i had this customers tablet for 3 weeks. all bc the first 2 screens i bought didnt come with the digitizer board so i had to wait on refunds. its been such a mess.

@florincostea3263 2 жыл бұрын

Any ideea if i did all of that and is not working . What can be the problem??

@rickstechrepairs 2 жыл бұрын

check connections

@florincostea3263 2 жыл бұрын

@@rickstechrepairs i did nothing wrong.

@kalyanprasadsharma6223 3 жыл бұрын

If you observe there is a gap between screen and body so what happened is every week dust accumulated in that gap i used to clean with my finger rubbing it hard but over the time it got loosen and suddenly when i was in my class it popped out i terrified screen went black but i can still listen audio so i sent it to service centre first they said its a display problem and after 25 days i.e today now they are saying there is some problem in the board , a pin is missing etc so i asked is display good or both display and mother board damaged they unable to answer one thing i understood is that i should pay some extra bucks. They charged me around 110 us dollars so i want to ask is is it really motherboard problem or they want more money??

@rickstechrepairs 3 жыл бұрын

Has it been previously repaired? no amount of rubbing the gunk out of the gap on the screen would make it fall out with a screen falling out it might pull on the flex cable which would pull on the board connector and possibly damage that but with this model there isn't much that can be damaged from the screen falling out, i replaced one yesterday and it has a single cable and adhesive around the screen and frame.

@kalyanprasadsharma6223 3 жыл бұрын

@@rickstechrepairs glad you replied No it's the first time I sent it for repair and the work is still going on I don't know they are telling truth or looting me :(

@kalyanprasadsharma6223 3 жыл бұрын

@@rickstechrepairs will this effect the display or motherboard or both ??

@kalyanprasadsharma6223 3 жыл бұрын

Hlo there so i received it after almost 2 months and also they didn't close the screen perfectly i mean screen didn't fix well .. The service is terrible at my place.... So should i use any gum or it will be good if i take it back..??

@cyroger9788 2 жыл бұрын

I am having the same problem it's not becoz of rubbing edges it might be cause of your device cover coz it might hold the outer back cover but not the screen itself so when you tilt the device the mass of screen pulled it off its cover so it might be a problem in disconnection of the ribbon umm I am still having my problem tho idk why

@dublodriver3539 3 жыл бұрын

Compared to other video's makes a real pigs ear of it. Wanted to see how to replace the digitizer shame did the whole unit.

@rickstechrepairs 3 жыл бұрын

nar just a simple LCD+Digi Replacement

@izariahmiyazono5637 2 жыл бұрын

Heyy i have a problem. I have the same tablet. i was using it when the display suddenly fell and the orange thing connecting them detached. i watch this vid so i can see how to reattach it again. i did it but it still wont turn on. what should i do? i rlly need help

@rickstechrepairs 2 жыл бұрын

the orange ribbon cable is called a flex cable it might be have damaged the connector when the screen fell out

@izariahmiyazono5637 2 жыл бұрын

i tried to check and i see no damage (at least with what i see with the naked eye). plus it didnt fell hard, and earlier the screen was black but has light, but it disappeared again

@grafparka6694 3 жыл бұрын

I did everything u did but the replacement screen is still black. Not lighting up

@rickstechrepairs 3 жыл бұрын

Check connection Possibly another fault

@grafparka6694 3 жыл бұрын

@@rickstechrepairs hmm. Trying to fix it for my daughter. Can you email me? gadawgs16@gmail.com

@secretsofhealth3555 3 жыл бұрын

Dear friend, Thanks for your video. I need a little more help. I did exactly same thing as you shown in video but the screen of my tablet is black after connecting the cable. I de attached and reattached the cable several times but the problem did not solved !!! I am hearing the Bib sound when I am pressings volume UP / Down button , but I see nothing in screen. Please Help me !

@rickstechrepairs 3 жыл бұрын

Sounds like the new screen might be a dud, or the flex cable that connects to the screen may have damage

@hixiro212 4 жыл бұрын

Do you know where I can buy a new back and screen?

@rickstechrepairs 4 жыл бұрын

AliExpress.com would be the place

@_misstq 4 жыл бұрын

T290?

@rickstechrepairs 4 жыл бұрын

@jo12danjames 2 жыл бұрын

As soon as I got the pry tool in the screen cracked

@rickstechrepairs 2 жыл бұрын

Damn

@r.lalhriathlualelhchhun 9 ай бұрын

Sir how much lcd prize ?

@rickstechrepairs 9 ай бұрын

Depends where you buy it from

@r.lalhriathlualelhchhun 9 ай бұрын

@@rickstechrepairs i want to buy but i dont know how to buy please help me

@FunnyVideos-yo4zb 3 жыл бұрын

I need help

@rickstechrepairs 3 жыл бұрын

what with ?

@cyneater6300 2 жыл бұрын

Thanks that tiny little PCB was a pain in the backside

@rickstechrepairs 2 жыл бұрын

Glad it helped

@Fixpod420 2 жыл бұрын

you sound like the australian version of Jerryrigeverything.

@rickstechrepairs 2 жыл бұрын

Cheers, high praise

@janardhanchavan2252 2 жыл бұрын

After LCD Replace Touch Not Work

@rickstechrepairs 2 жыл бұрын

Check connection on the touch panel, or a faulty touch panel

@nicolesollacaro1148 6 ай бұрын

8:11

@repsolal 3 жыл бұрын

not a good design, cant disconnect battery before working on it..........

@rickstechrepairs 3 жыл бұрын

agreed

@repsolal 3 жыл бұрын

@@rickstechrepairs I have another one here today for screen replacent and I tested the small digitizer board.... It is secured to back of screen with conductive tape to ground it.