Рет қаралды 3,593
Do you want to learn how to customize multiple caps with mixed-media designs? In this episode of Embroidery Hub, we’ll demonstrate how to decorate nine youth caps with 3D puff embroidery and HTV using THREE single-head embroidery machines, our RCP-6301 25” vinyl cutter, and the Ricoma Auto Open Cap Heat Press. We’ll walk you through the entire process from start to finish, including the materials you’ll need and how to adjust the tension on your embroidery machine. Along the way, we'll also take a look at the benefits of each of the three single-head commercial embroidery machines we used for this project, and so much more.
Watch us use the EM-1010 Semi Commercial Embroidery Machine to embroider on a car mat: • EMBROIDERY On Car Mat ...
Learn more about the similarities and differences between our single-head embroidery machines: • Comparing Single-Head ...
Learn more about the Ricoma Auto Open Cap Heat Press: shop.ricoma.co...
Join the Ricoma newsletter for educational blogs, videos, and live webinars: info.ricoma.co...
To learn more, schedule a virtual demo today: ricoma.com/US/...
Get our latest Ricoma embroidery KZfaq videos sent straight to your Facebook Messenger: manychat.com/l...
Follow Ricoma on Facebook to check out more of our videos and educational content, and to tune in to our Live Q&As: / ricomahq
Follow Ricoma on Instagram to view more great videos and tutorials featuring custom apparel masterpieces that you can make from home: / ricomahq
Follow Ricoma on TikTok for even more educational and entertaining videos: / ricomahq
To receive embroidery tips and techniques from seasoned pros and get free embroidery content and advice, join our Facebook group, Embroidery & Printing Business Help: / embroideryprintingbusi...
00:00 Intro
01:02 Materials
01:39 Hooping Caps
04:41 3D Puff Embroidery
13:23 HTV Design & Software
15:53 Vinyl Cutter
19:27 Heat Press
21:20 Profit Potential
21:41 Finished Products
We begin this episode by going over all the materials we’ll be using to customize a bulk order of youth caps, including our EM-1010, TC-1501 and MT-1501 single-head embroidery machines. Then, we’ll show you how to properly hoop all nine caps and attach them to the embroidery machines.
After that, we’ll move on to the 3D puff embroidery portion of the project. We’ll take you through the entire process step-by-step, from attaching the 3D puff foam to the caps and tracing our designs to adjusting the tension on our embroidery machines and using a heat gun to remove any remaining foam.
Once the 3D puff embroidery is complete on all nine caps, we’ll demonstrate how we set up our heat transfer vinyl designs in the SignMaster CUT+ARMS software that comes with our RCP-6301 25” vinyl cutter, as well as how to scale the designs so that they fit onto the backs of our caps. From there, we’ll load our vinyl into the machine and show you how to set the correct cutting force and speed.
After the excess vinyl is weeded and ready to go, we introduce our Ricoma Auto Open Cap Heat Press and share some tips to help ensure your heat transfer comes out perfectly. Finally, we’ll discuss what kind of profit you stand to make from a project like this and display our finished products.