Rifle Bedding Easy...Part 1 - The Prequel!
Рет қаралды 3,963
Күн бұрынLet's walk through the set-up for bedding a rifle stock. This is the video I should have started with.
@rosswitte 3 ай бұрын
Great idea to put the q-tip on the pick! A tip for you is to come back a few hours later (time will vary depending on product used, humidity etc.) and break the action screws and retighten. This way the epoxy will be set enough to be stable, but is not fully hardened yet, and if you got epoxy on the threads and not enought relief agent, you won't epoxy the bolts into the action.
@capersprecision2478 3 ай бұрын
Appreciate it.
@greybone777 Ай бұрын
I defy anyone to bed a rifle like a pre 64 model 70 Winchester. You're bedding the action. Nobody beds barrels anymore.
@capersprecision2478 Ай бұрын
I guess I’m not tracking, I don’t bed forends under the barrel. Now on some synthetic stocks you do need to stiffen them up but you aren’t bedding the barrel. I think you might be talking about the over flow in front of the recoil lug? Most of the time I clean that up in the mill and only the action is left bedded. Sometimes I do leave the over flow depending on the application and have never seen an issue, but that’s rare.
Wolf Precision, Inc.
Рет қаралды 9 М.
CAL FIRE Butte County Fire Department
Рет қаралды 1,1 М.