CZ457 LRP Factory Barrel VS IBI Barel - Lapua Center X

CZ457 LRP Factory Barrel VS IBI Barel - Lapua Center X - 50 Yards Ammo Test

Рет қаралды 24,513

Жыл бұрын

CZ457 LRP Factory Barrel VS IBI Barel - Lapua Center X - 50 Yards Ammo Test
In this video I will test Lapua Center X, 22 long rifle rimfire ammunition to see how well this ammo performs in my CZ 457 LRP with the factory barrel and also with the IBI barrel. I have installed a flat blade Timney CZ 457 precision Trigger.
Each test will be compossed of 40 shots in total all fired from the prone at 50 yards. I will be recording shot data including (SD, ES, Highest, and lowest velocities, as well as the average velocity) of the ammunition tested. every test begins with 20 fouling shots from a clean barrel bore, followed by 4 - 5 shot groups
parts used: Timney trigger, amazon arch rail custom fit, Bipod Factory Carbon Fiber BIPOD, Vortex Precision Rings, Vortex Razor HD GEN I, IBI International Barrels Inc. Schnooble 22in.
Hope you enjoy the testing and DON'T FORGET TO SUBSCRIBE! , COMMENT, AND LIKE! the video.
There will be new videos releasing every Sunday morning at 9 am!

Пікірлер: 120

@AirGunVic 18 күн бұрын

From a guy who used to shoot 400×40x at 50 yards routinely in NRA competition, nice shooting! I appreciate that you get right down to business.

@BROTUNED 17 күн бұрын

Thank you I appreciate it. It’s very addictive and time on the gun doesn’t break the bank which is very nice

@vicgarrett Жыл бұрын

The most entertaining clip of yours yet. Outstanding shooting with very consistent ammo and I thoroughly enjoyed it.

@BROTUNED Жыл бұрын

Thank you very much

@murilofigue6739 20 күн бұрын

Another high quality test video!! one of the best rimfire channels!! Thank you for sharing with us

@BROTUNED 19 күн бұрын

Thank you very much! I really appreciate that have a great day

@davidlewis3790 Жыл бұрын

Great work and some fine shooting!!! Interesting results between the two barrels, I found the ES and SD the most interesting with the groups results. A larger sample might get them closer but there is always static 22lr shooting, endless fun and endless learning. Thanks again for all your efforts, very informative.

@richardmattix5322 Жыл бұрын

From someone who has changed out those barrels and knows it is not the easiest task. Your efforts are very much appreciated done in these videos. Thank you

@BROTUNED Жыл бұрын

You are welcome. I prefer to clean the barrels when they are out of the rifle so it’s a very common occurrence for me to pull the barrel once a week. Now it’s twice though lol.

@timothyyates6130 Жыл бұрын

If you think the 457 barrel change is hard you should try a Tikka T1x.

@wayneschenk5512 Ай бұрын

C457 quick change system is pretty straight forward in design.

@inrangerimfire20two Жыл бұрын

Awesome results man. Also, I loved the format and the way you did this video.

@BROTUNED Жыл бұрын

Thanks so much seems to work well

@Theright2bheard Жыл бұрын

Just good old “bread n butter” head to head facts without all the “jam” like a lot of videos. Great job!

@esoxecosse66 Жыл бұрын

Great video as always Ryan, really enjoying your barrel comparison 👍

@BROTUNED Жыл бұрын

They are double the work but it seems you’re not the only one who likes them so I’ll have to get to work ha ha cheers

@earlcahn3688 Жыл бұрын

Great job Ryan. It's a lot of work but entertaining as he'll. Thanks.

@labsican Жыл бұрын

Excellent as usual Ryan and some very useful information.Thank you.👍🏻

@BROTUNED Жыл бұрын

Glad you enjoyed it

@sherryengrav3370 Жыл бұрын

Great shooting this is the best video you put out yet. Keep up the good work.

@BROTUNED Жыл бұрын

Thanks 🍻 cheers

@brettdawson5326 Жыл бұрын

Great info/video. Waiting for my MDT XRS Chassis to arrive, cz 457. Can't wait to go to the range 👍

@Greryman Жыл бұрын

Excellent video. I love these head to heads with the stock barrel vs IBI.

@BROTUNED Жыл бұрын

I’ll start making more of these video’s but I have 3 other videos ready to release so the next will be in July sometime

@Jdelta22nc Жыл бұрын

Wow! That IBI is a beast! I know it takes a lot of work changing barrels, than you for the work you do, great video!

@BROTUNED Жыл бұрын

No problem at all

@realtruth4259 Жыл бұрын

JEEZ MAN LUV THE CONTENT KEEP ON KEEPIN ON..... MADE MY MORNING BRO THNX....

@gaetanvallee Жыл бұрын

It is a very big job for this video, wow, you made a crazy score, il love your presentation 2 barells on a same target, excellent, thank you Ryan, you are the best for me

@jameshalpin1580 Жыл бұрын

Hi great shooting with both barrels I like my cz457lrp in standard form but nice to see the comparison thanks

@lonz5.56 Жыл бұрын

The factory barrel has better velocity and ES/SD numbers! For the money the ibi does not improve enough over stock. Would like to see how they compare down range at 100 and 200 yards. I think I’ll be after a Lilja for my 457

@rustynut1967 Жыл бұрын

Both barrels were stacking them in there nicely. It looks like there was a POA POI shift on group number 3 with the CZ barrel and a small shift on number 4 with the IBI, but that one could have been wind to. Both #4s favored a little left while most of the others favored center right, again could have been wind.

@BROTUNED Жыл бұрын

It would be nice to be able to eliminate the wind but it’s just never going to happen out back

@Dayattherange Жыл бұрын

We really appreciate the work I can only imagine having to swap barrels on top of everything else a 1 man show like yourself has to do. Both barrels were hammering with CenterX you better write that Lot# down and keep it. Oh yeah and by the way great looking Ball Cap.

@richardmattix5322 Жыл бұрын

Without seeing the Cap I am sure it will meet to your approval Mr. Revolver guy. LOLSSS

@BROTUNED Жыл бұрын

I think the hat makes me shoot better lol I honestly think that was the best I have ever been able to do with the factory barrel and same with the ibi. The newer Center x seems to be the way to go with my rifle not even sure if I can beat that with tenex

@richardmattix5322 Жыл бұрын

I enjoyed your 22LR shooting also. Is it rest time now since I haven`t seen any new 22Lr videos

@Dayattherange Жыл бұрын

@@BROTUNED The most accurate Eley in my rifles are Eley Team it absolutely hates Eley Tenex.

@BROTUNED Жыл бұрын

I still release a 22lr video every Sunday morning. I try to stay 2 or 3 weeks ahead incase anything happens. I’m in the middle of a home renovation project at the moment but I will do my best to keep up a one video per week as long as I can.

@richardmattix5322 Жыл бұрын

outstanding job BRO

@sebastianfedorowicz6967 Ай бұрын

Great work. Keep it up.

@BROTUNED Ай бұрын

Thanks, will do!

@willh9759 4 ай бұрын

Great video ! Did you have to add shims to the bolt to head space or just shoot it as is out of the box ?

@BROTUNED 4 ай бұрын

Bolt is not shimmed. I do have the shims and I tried the smallest one and accuracy got worse so I took it back out

@vernonwestfall1652 Жыл бұрын

Nice shooting iwi barrel liking that center x

@johnterhark6516 Жыл бұрын

Great video again.👍could I ask you what’s your trigger pull set at?

@BROTUNED Жыл бұрын

It’s just under 1 pound. I could go lighter I think but this way I don’t accidentally discharge it’s always intentional

@martinclark5267 Жыл бұрын

Great work

@BROTUNED Жыл бұрын

Thanks

@johngarrett6256 Жыл бұрын

Again good stuff 👍 my IBI likes eley match shoots lights out my cz stock shoots SK just like you mentioned

@timothyyates6130 Жыл бұрын

That's really good shooting. One thing I'd recommend trying is to put a piece of cardboard behind the target, that would reduce paper and make cleaner round holes.

@glennnewell8786 11 ай бұрын

Nice video. I had the same results until I got around 500 rds through the IBI. Now it shoots better than the cz. Very happy with both. Let me know how’s it’s shooting now. All so did you shim the bolt. That too improved the hell out of the ibi.

@BROTUNED 11 ай бұрын

I tried shimming my bolt with even the thinnest shim the bold close was so tight it required a lot of force close it and I didn’t see any improvement in accuracy possibly I could try it again

@beyondtwominutes 6 ай бұрын

Interesting. Velocities seemed better in the cz barrel. But then those groups opened up. IbI had some good velocities but then some highs and lows. though its groups seemed to get better. I like the contour of the IBI though. Good stuff.

@user-hd7oy6th6g 11 ай бұрын

Lots of good info and shooting that will go in the mix on my CZ currently mine has done with the SK-LRM. I have sorted the ammo by rim and weight. Still will have an outlier out of 5 shots. groups are pretty consistant at .52 moa.

@BROTUNED 11 ай бұрын

That’s very good my rule of thumb is it has to be better than 1 moa so at .5 you’re golden.

@user-hd7oy6th6g 11 ай бұрын

We shoot a 'bench' match 2x a month and do targets at 75,100,150,200,250, the short targets are the KYL, and at then we do targets (7) 7"-1" and at 200 and 250 we do 9"-3" and there is ALWAYS wind to consider. I am happy with the SK-LRM out to 150 but not at further targets, Some are using the Lapua super LR. but I'm still not convinced it's better. Are you going to stretch out to longer ranges?@@BROTUNED

@yl3064 Жыл бұрын

Good day and thanks for sharing. -I like the cap ( Day at the range) any idea where i can get one ? thanks

@BROTUNED Жыл бұрын

Email him from his website mr.revolverguy@dayattherange.com

@nelsonm5032 Жыл бұрын

great shooting! the IBI barrel is a nice piece of steel! hey, where did you get those targets? purchase or print yourself? targets have gotten sooo expensive as of late!!!

@BROTUNED Жыл бұрын

I print them from dayattherange.com go to Z challenge and you will see the targets linked in there

@nelsonm5032 Жыл бұрын

ok thanks, Ryan. cheers

@juniorcopeland9082 7 ай бұрын

Did you ever consider with that chrono hanging off the end of barrel might be changing your barrel harmonics? Just a thought !!

@BROTUNED 7 ай бұрын

It doesn’t touch the barrel

@juniorcopeland9082 7 ай бұрын

@@BROTUNED ok it looked like it was on the barrel on the video 👍

@juniorcopeland9082 7 ай бұрын

@@BROTUNED nice shooting off a bipod, by the way...I enjoyed your video, have you tried Aguila or Norma in that rifle? I have an old BRNO model 4 that loves that ammo shoots it pretty consistent 1/4" groups with the Aguila hi-vel and haven't shot as much with the Norma yet...but it seems to shoot it well also for cheaper ammo it shoots well...better than CCI Blazer in that gun any ways !!

@stevenb-nh2xf 10 ай бұрын

I hope you can photo the coyote control.

@stevenxindaris1477 6 ай бұрын

Check out EABCO new 24” stainless barrel for CZ 457. Claiming 1/2” to 3/4” 5 hot groups at 100 yards. $299.00.

@timothyyates6130 Жыл бұрын

I might be asking this question a little early but what chamber is cut in the IBI barrel?

@BROTUNED Жыл бұрын

I’m not sure I’d have to look at the paperwork. I didn’t specify a specific chamber so I’m guessing it’s the default chamber ibi uses. I’ll look it o it and let you nnow

@johngarrett6256 Жыл бұрын

I sure wish Lapua would focus better on getting there SK line out more it is so hard to get certain brands here in the states.

@BROTUNED Жыл бұрын

Even harder here in Canada 🇨🇦 we only get some if there is extra it seems like

@stevenb-nh2xf 10 ай бұрын

Give the specs on the IBI. Diameter, chamber, length and weight and if threaded or not.

@BROTUNED 10 ай бұрын

The diameter is .860” and the fatter end is .925” the overall length is 22” I have never weighed it bit it’s just a bit heavier than a factory mtr barrel.

@Jesse-le9bh Жыл бұрын

Thanks

@pmann438 24 күн бұрын

Do u ever dial the slop out of the scope turrets?

@BROTUNED 21 күн бұрын

I have never tried seems like there is non between clicks

@donniepowell7146 Жыл бұрын

I like both barrels.

@BROTUNED Жыл бұрын

They both shoot very well

@mickeyreefer4212 5 ай бұрын

What do you torque your barrel screws to.

@BROTUNED 5 ай бұрын

I do 35 in/lbs for barrel grub screws and 32in/lbs on action screws

@wiskijack Жыл бұрын

What’s the name of your rear bag?? Or is it home made?

@BROTUNED Жыл бұрын

It’s home made.

@RickyTan55 8 ай бұрын

Are you headspacing these barrels using shims?

@BROTUNED 8 ай бұрын

This barrel didn’t come with shims. I do have bolt shims but didn’t like how tight the bolt close was with even the smaller shim

@RickyTan55 8 ай бұрын

No shim work on either barrel then? Very nice.@@BROTUNED

@juniorcopeland9082 7 ай бұрын

@@BROTUNED if the bolt is harder to close on smallest shim, that means your headspace is probably where it should be without the shim !!

@drewhunt8038 11 ай бұрын

i have 2 IBI's one on a deuce setup and one on a CZ 457 setup....clean it as little as possible good sir! just do the chamber and the carbon rings every 4-500 rounds is my opinion and what Ryan from IBI tells me...works well

@BROTUNED 10 ай бұрын

Thanks for the tip! I used to not clean my 22lr s but lately and for these ammo tests I’ve been cleaning them and seems to do better. Maybe I’ll do a video on that see if I can find some consistency in the results

@drewhunt8038 10 ай бұрын

@@BROTUNED I just watched your recent video today…I ordered rws rifle match s…should be here this week it’s shot as good or slightly better than the target stuff that you just used (yes it’s abit more I get it haha) I recommend tryin it…I’ve been told it’s a hidden gem and isn’t as well known so the price has stayed slightly down

@glennnewell8786 11 ай бұрын

You should send some of your videos over to that guy that does the aim small miss small. Poor guy needs some help or needs to stop getting high before he makes them. Anyway great job.

@BROTUNED 11 ай бұрын

Lol who is that?

@hernangoni7528 4 ай бұрын

is barrel is twist 1/16?

@BROTUNED 4 ай бұрын

Yes it is

@n.baidak Жыл бұрын

What toque do you use?

@BROTUNED Жыл бұрын

I use 30”/lbs on the barrel grub bolts and 30 on the action screws starting with the front bolt near the mag well I just snug it up then the rear action bolt then I bump the rifle on it’s butt pad to ensure the recoil lug is engaged in the action then a final torque with the fat wrench to 30”/lbs. I think cz recommends 50”/lbs on the barrel grub bolts but I leave my wrench at 30”/lbs and don’t touch it. The fat wrench isn’t really a precision tool so one day what I think is 30” could be 29 or 31. So it’s set and I just rope with it

@n.baidak Жыл бұрын

@@BROTUNED as i know, cz recomeds exactly 31 inch/lbs (35nm). I was trying to play with torque, and as a result best grous were with 30, 35 and 45 nm.

@BROTUNED Жыл бұрын

I also played with torque settings on this rifle and there was a node around 30”/lbs and as far as the barrel grub screw torque I also tightened them to 30”/lbs this way the torque wrench stays the same and also speeds up the swapping process.

@blackprince4074 Жыл бұрын

Wow $20 per box of Lapua, in Australia it would be $30 +.

@BROTUNED Жыл бұрын

Man I thought I had it bad

@RedNeck_Rimfire Жыл бұрын

That thing is a hammer

@BROTUNED Жыл бұрын

Thank you sir!

@sk8snwmx Жыл бұрын

Nice Shnuble..

@BROTUNED Жыл бұрын

Lol thanks

@williamkoppos7039 Жыл бұрын

Haha a mosquito made me throw one. That's New! I'm gonna use it. Good shootin'.

@BROTUNED Жыл бұрын

Lol

@lewisrice3741 Жыл бұрын

If you put some serious lead through that factory barrel it will shoot with any other barrels out there. None of my czs shot that fantastic until I had shot them for awhile you might be letting a good thing go by the way side. Beagleman

@BROTUNED Жыл бұрын

It does shoot very good and I shoot both quite often.

@outboardfun3353 Жыл бұрын

WOW I can get X-Act for $24.50 box

@BROTUNED Жыл бұрын

Ya it’s very expensive here

@LowkeyAirgunner Жыл бұрын

Pretty good accuracy from the stock barrel I thought it would do better than the IBI in this battle! _Yote plinking comin soon._ 🐔

@BROTUNED Жыл бұрын

It was very close

@lewisrice3741 Жыл бұрын

Old buddy if you will shoot that. Factory barrel it will just keep getting better that is what mine did and it just keeps getting better. That center x is shooting awful good in both barrels don't you think? Seems like I have told you this before just kidding. By the way that is the same lot I shoot if you ever want to get rid of that lot let me know I will take them of your hands. Your bud Beagleman

@BROTUNED Жыл бұрын

It definitely shot very well I was afraid I wasn’t going to be able to shoot the ibi as good. That lot of center x is amazing stuff.

@TunerPlinker Жыл бұрын

Would be nice to have this setup to see if it was the shooter or flyer: kzfaq.info/get/bejne/pNmSpNWhmZvFmZc.html

@BROTUNED Жыл бұрын

Yes I saw this pop up in my feed but haven’t had the time to watch it yet. I have it saved in my watch later list and it’s high on my priorities to watch