Thanks for this very clear explanation. I willl be happy to try soon .Tusiche (thanks in tibetan), tashidelegs (good happy life).
@BenHenry1957 Жыл бұрын
I was surfing around trying to learn how roller mills were used with textured paper and this video explained that and more. I was a commercial jeweler for years and used a rolling mill, but for only mundane tasks like making wire or small sheets. Great video.
@LTGuitar51 Жыл бұрын
Absolutely amazing. I did not know how easy is to make texture plates. Thank you so much!!!
@amylambert23655 ай бұрын
Helpful! Thank you. Love the feathers too. Good video.
@maryleemartz37227 ай бұрын
I have been try to find the spring for so long, thanks for sharing!!
@KathleenMcKinney-oh2km3 ай бұрын
Could you mention again what you did after rolling the copper with the textured pieces again in order to get the darkened look on the metal? I missed what you said. Thanks
@lizbrown12632 жыл бұрын
Thank you for sharing this updated info on rolling mills✨
@RioGrande19442 жыл бұрын
You are welcome!
@richardhazell260126 күн бұрын
Cheers Dude. Very useful.
@RioGrande194425 күн бұрын
We are glad you found it helpful!
@stephencoster95322 жыл бұрын
Hiya, a great video, yet again. You have some very talented artisans working there. Thank you, stay safe, Steve...
@RioGrande19442 жыл бұрын
Thanks, we agree!
@tmoore254411 ай бұрын
You are terrific! Thank you so much for this video!
@dt66152 жыл бұрын
Amazing. Just what I was looking for. Thankyou for your advise and expertise 👍
@RioGrande19442 жыл бұрын
Excellent! We are glad you liked the video!
@paullemay32182 жыл бұрын
Thank you for sharing this awesome technique. Greatly appreciated. 🇨🇦
@RioGrande19442 жыл бұрын
You are so welcome!
@AshHeilbron Жыл бұрын
This is so crazy and creative, love it!!!
@RioGrande1944 Жыл бұрын
Thank you for the feedback! Glad you liked it!
@cbailor12 жыл бұрын
Is there any pointers you can give on running a leaf through a Rolling Mill I've gotten it to give some details but not as beautiful as the one you've shown perhaps I'm doing something wrong I do soft in my metal before I feed it through and I have taken your advice to dry my own leaves anyhow would be greatly appreciated also very cool video
@cbailor12 жыл бұрын
I've also tried feathers and they didn't turn out this nice either perhaps
@ellesiem61312 жыл бұрын
Really cool texturing tips, thank you. I have a Durston rolling mill, and would love some info in the unboxing video on up keep. Thanks. ☺️
@RioGrande19442 жыл бұрын
Thank you Ellesiem! We're working on an unboxing video as well as a maintenance video. I'll post them both here as soon as they're ready.
@BlueLineofthesky Жыл бұрын
Excellent video. Thank you!
@RioGrande1944 Жыл бұрын
You are most welcome. Be sure to subscribe to our channel!
@mrsjones55675 ай бұрын
Do u have to anneal dead soft to use the roll mill?
@KYATKAT2 жыл бұрын
Thank you ...
@MariaLanger2 жыл бұрын
Thanks for this. I appreciate idea sparking videos like this. Great information!
@RioGrande19442 жыл бұрын
Glad you enjoyed it!
@kathyfriedman5712 жыл бұрын
Great demo
@suzannehargrove436110 ай бұрын
Hi, Thank you for a nice video. A saw someone asked about the thickness of the copper sheet but did not see a reply. What is the thickness of the sheet you are printing on please?
@rampanttricky172 жыл бұрын
Provided the answer to a question i had and provided more ideas!
@RioGrande19442 жыл бұрын
Excellent! Glad it was helpful.
@kathyfriedman5712 жыл бұрын
Great demo!
@marian1576 Жыл бұрын
Just need to check in on this: let's say I want to make just one pendant from a piece of lace or leaf or feather, etc., would I just put my annealed metal with the item on top and roll that through or do I have to make a sandwich with another piece of metal on top of the item? Logically, I don't see why it just couldn't be put through with just the metal and the item, but I always see people putting metal or foam on top (the foam makes no sense to me - why would you put something soft when you want to make a strong impression?). I trust Rio to give me the correct scoop on this. Thanks.
@JESSMAAY Жыл бұрын
i have this same question! do you have any insight on it now? thanks!
@PS-xw8kg2 жыл бұрын
Love this!
@lunasky56352 жыл бұрын
I was told in a class that you cannot use leaves for texture. Thank you for showing how to do it
@RioGrande19442 жыл бұрын
Happy to help!
@mallorca311 ай бұрын
Great video thanks! I tried using dried seaweed to texture today, but it didn't work out. I used paper around my copper and seaweed rather than two pieces of metal to protect the rollers and on one attempt the rollers just mashed up the paper and seaweed and the imprint was of mashed paper I think. I'm guessing the roller was too tight? In theory dried seaweed should work shouldn't it? What thickness of metal should be used? And does a rolling mill work with blanks or should you only use sheet? TIA, Deb x
@TenebraeEques2 жыл бұрын
So cool! thanks so much!
@RioGrande19442 жыл бұрын
Our pleasure!
@petersmedley4592 жыл бұрын
How thick are the plates you’re imprinting onto? Is there a maximum thickness you would recommend? I know that silver works…what about Bronze?
@erizabesu87 Жыл бұрын
Amazing 🤩
@user-dp1dm2hs8i Жыл бұрын
Зачетные вальцы!
@jamaica720012 жыл бұрын
What is the proper way to use a steel plate made for a rolling mill? should the steel side be protected with another piece of metal?
@RioGrande19442 жыл бұрын
Hello, we have a video about that topic, and you can view it here kzfaq.info/get/bejne/idaeqbJz0p-UeKM.html. Please let us know if you have any other questions though.
@duocmat51922 жыл бұрын
👍👍👍♥️
@rolandschmidt82852 ай бұрын
Das sieht mir persönlich zu sehr nach Maschine aus. Gerade die handgeschmiedete Unregelmässigkeit macht das Material für mich interessant. Und die Seele, die das Werstück mit formt...
@maladylis082 жыл бұрын
I wish somebody would talk about when you get a brand new Rolling Mill and how to use it. I have a brand new Rolling Mill and it's covered in grease or something and I'm not sure how to get started. Can you do a video about that? Thank you
@RioGrande19442 жыл бұрын
Hi Lisa, we actually have a rolling mill unboxing video in the works. We'll reply here with the link as soon as it is available. As far as the "grease" on the mill, that is to protect the machine from rust during shipping. You can use a white solvent like mineral spirits and a lint-free cloth to remove it.
@maladylis082 жыл бұрын
@@RioGrande1944 thank you so much ! Cant wait to see the new video !
@kimauger42936 ай бұрын
@@RioGrande1944The unboxing video was never linked her. I browsed your videos and did not see one posted in the last 2 years
@kimauger42936 ай бұрын
Can use leather to texture the metal using a rolling mill?
@pedranovadenovo94192 жыл бұрын
I want to buy at the Rio Grande store, do you sell it at retail?
@RioGrande19442 жыл бұрын
Hello! Thank you for the message! Unfortunately, we do not have a storefront for retail.
@pedranovadenovo94192 жыл бұрын
@@RioGrande1944 do you have any resellers?
@pedranovadenovo94192 жыл бұрын
@@RioGrande1944 I want to buy wholesale, but I can't register
@pedranovadenovo94192 жыл бұрын
I can't attend
@RioGrande19442 жыл бұрын
@@pedranovadenovo9419 Hello, thank you for this. Anyone can sign up for a standard account, with access to this product and most of our inventory.