True, hehehe

Anytime brother, did you see your Cb's on Automotive Anatomy, too bad my Snoe Whyte got a shot doing a flyby, gracias senor.

@@sagittnet2158 hahaha yeah! He said he wants to get in contact with you I gave him your youtube channel info!

@@capster15 ride on! Thanks bro, lmk if you need a hand ok.

Would u be able to make this for ppl ? Cuz I would pay for this . If u can ?

@@ZERODSF l probably cannot due to the bracket are easily available on the market and very affordable. They sell a kit also so pretty much plug and play. At present time, l'm using a FFC.com bracket coz of a different route on my brake system I'm planning. I will recommend email fastbrakes.com if you are thinking of a different brakes setup, they might be able to make a kit for you. And thank you for your interest on my brake setup and for subscribing.

Prelude and Accord w/ Acura CL brake ROH conversion is same as 4th gen dimension. Fastbrakes.com have lots of variety brake upgrade to choose from if your interested. You just need to have a RL calipers and a good set of wheels to clear it.

Thank you

Rotor-Over-Hub

honda-tech.com/forums/honda-accord-1990-2002-2/diy-rotor-over-hub-conversion-2027047/

If you can get a front knuckle assy w/ all the parts it'll be easier. But you can slways just get piece parts like what on the link l gave.

It's from Honda Pilot and 28mm thick.

Thank you

Can't remember how much material was taken off. But the rotor will dictate how much material you'll be removing.. l'll make a short vlog of it. Post it up maybe tomorrow.

Yes, it's ARP extended studs.

Not sure if fits, but you'll need the RL rear bracket and rotors. I'm not sure what rear rotors can be use on 5th gen Accord but l do know that fastbrakes.com sell a rear disk upgrade and caliper bracket.

@@sagittnet2158 i have a 99 6th gen coupe. I was wondering if the rear caliper will bolt up, or if I’ll have to get a special bracket. I have the whole front setup, but i just want to double check before i take apart the car.

@@dillonbragatto4705Is this a disk upgrade your'e thinking of? If it is, once you figure out what rear disk to use, the caliper should work on your choice of disk. The thing that you have to figure out next will be the bracket that the caliper will bolt on to. For example, if you use all RL rear brake setup ( disk, caliper, bracket, assuming disk fit) you will have the correct spacing except for rhe rear caliper bracket that will bolt to your rear knuckle. RL bracket might not work.( only an example). What you can do to make it work is make a custom bracket for your caliper to bolt on. I thought of making a diy rear disk upgrade on my 5th gen, but l kill the idea coz l'm still 4 lugs and my spare tire might not fit in case l have a flat tire.

@@dillonbragatto4705 you can email fastbrakes.com and tell them what your idea. They do answer quick and if you browse on their website, they might have the bracket that you need. You probably dont need the RL caliper, your accord just maybe need a bigger disc and bracket and use your existing caliper.

@@dillonbragatto4705 kzfaq.info/get/bejne/Y9RojaiDqdWcm3U.html Checkout vtec academy's blog. Hope this help you out.

17x7 42 mm offset. It's a staggered setup. 205/45/17 front 215/45/17 rear. With 215 at front, it rub so much on a turn, so l went 205 and that fixed my rubbing issue.

@@sagittnet2158 thank you so much I just bought 215 50 17 car is not lowered yet I’m doing that next week. I was hoping I can possibly just drop it enough to close wheel gap. Awesome content

@@N0b00st 50 series would be too tall on 17". It'll fill the gap. Hope you like how it'll turn out.

11 Honda Pilot/ 330mm or 05 subaru sti l think. It has been a long time that l hardly remember now.

@@sagittnet2158 awesome I just got my brackets to do it on my tsx.. and would not mind running a 13 inch rotor.

@@illusive909 ok, but using 13" rotor is not plug n play. I had to do some mods on the caliper and put spacers on bracket and use long bolts. And also check the hat offset on the rotors if you're going this route.

@@sagittnet2158 yeah I watched your video and seen what you did to the caliper to make it work.. don't mind shaving mine a bit to make it work.

@@illusive909 why l use a 13" rotor, it's mainly because l dont want to use a thick spacers on my wheels. I know you can fit 13" rotor on Tsx, but do some research coz l dont want you to have a bunch of parts that you cant use.