How To Replace a 2 Stroke Motorcycle Throttle Cable

No video

How To Replace a 2 Stroke Motorcycle Throttle Cable

Рет қаралды 208,157

7 жыл бұрын

Shop: Two Stroke Throttle Cables
www.rockymount...
Is your motorcycle's throttle cable getting sticky and hard to twist? Watch this video where we walk you through the steps to smooth out your throttle! We demonstrate tips like how to lube your throttle cable and how to position your throttle tube on the handlebars. If your throttle cable is toast, don't sweat, we have a large variety of aftermarket and oem cables to get you back on the bike and twisting that throttle!
How To Replace a 4 Stroke Throttle Cable
• How To Replace a 4 Str...
Click Here To Subscribe To Our Channel!
/ @rmatvmc
Follow Us On Social Media!
FACEBOOK: www.facebook.c...
INSTAGRAM: www.instagram....
TWITTER: RM...

Пікірлер: 95

@parkdog1916 7 жыл бұрын

Rocky Mountain ATV MC for all your 2 Stroke needs

@mikespain8655 6 жыл бұрын

If only it were that easy in real life.

@nicholascaron9579 4 жыл бұрын

It’s not hard it all

@tyl3raz7 4 жыл бұрын

It literally is though

@johannbach1903 4 жыл бұрын

Lol it's never going to be easy if you have tools like me. Im sure if you had a badass workshop with all the tools, it'd be quick. When you just have a monkey wrench & a bag of sockets, good luck.

@mathemacits2400 4 жыл бұрын

Its just hard as hell putting the carburator back in when there's barely room in between the frame and engine but it's still doable

@Itsyunlo 3 жыл бұрын

My cable is not tryTrying to pop out of the slide I don’t understand how he effortlessly pulled it out

@brandonlachance7899 4 жыл бұрын

Used this for my cr250 worked great! Only real difference was the throttle cap mechanism which was really a simple device.

@rmatvmc 4 жыл бұрын

That's great to hear! Glad it helped out!

@stingr5409 2 жыл бұрын

Thx man. My cable snapped and I had no idea how I was going to fix it

@nastysoda9212 Күн бұрын

Thank you!

@RelentlessCo 7 жыл бұрын

My Favorite 250 Build 👌🏽

@mortgagesandrealestate3563 5 ай бұрын

Great video, thank you

@_Drae2210 Жыл бұрын

This video doesn't talk about slide and idle position, which I guess could be a video of it's own. Since you were installing a new cable it would be nice to note where the slide is on the intake side so that the idle isn't so high the bike doesn't start. Think I have that problem with my bike because it had compression, fule, and spark but wouldn't start or try to start.

@jimcole1578 6 жыл бұрын

Great video, thanks!

@justanother8407 5 жыл бұрын

Well put together and clear instructions

@thepretender4640 7 жыл бұрын

Very detailed video guys, thanks

@Bayfieldboyy Жыл бұрын

did this and now bike revs high and it never use to do that any solutions ???

@landonmoore5457 3 күн бұрын

I think your cable is to tight and it’s getting pulled

@robhayter484 6 ай бұрын

Not the safety glasses 🥽 again 🤣

@albertalberto2490 6 жыл бұрын

I have a single throttle cable on a four stroke

@exclusionexperts596 2 жыл бұрын

Nice breakdown 👍 Thanks

@angelomills2967 2 ай бұрын

When I turn to the right the bike revs as if it’s pulling the throttle, throttle route looks similar if not same as here, and suggestions

@JAVTROOPER 3 жыл бұрын

Crystal clear tutorial 😍

@forresttaylor6849 2 жыл бұрын

Thanks very helpful.

@rotemhillel4679 Жыл бұрын

thank you!

@user-gd1yu5gx2l 4 жыл бұрын

Thanks a lot for thos vid! I want to change the throttlebody on my husky sms 125, because i wanna get these awesome emig lock-on grips. Can you recommend andy good and affordable options?

@rmatvmc 4 жыл бұрын

I am not very familiar with that bike but you shouldn't need to change your throttle body to put on lock-on grips. Lock-on grips will come with a few different throttle cams which will make them work on most motorcycles.

@robertbarba3948 7 жыл бұрын

Do a video on how to adjust clutch cable on 2 stroke

@rmatvmc 7 жыл бұрын

Check out our Top 5 Clutch Maintenance Tips Video: kzfaq.info/get/bejne/gdWAediGva2lYGg.html *-Vinny*

@rmatvmc 7 жыл бұрын

Clutch Cable Replacement coming soon! Thanks

@mx3697 5 жыл бұрын

Does the slide just go back in with no problems or adjusting

@robertveberg6692 2 жыл бұрын

Thanks alot, great content!

@hendrixallan2992 5 жыл бұрын

I've only managed to find double throttle cables for my single throttle cable 2 stroke derbi senda 2007 sm. Would it work with a double? Could they second one just act as a spare?

@leelafarlett3535 7 ай бұрын

About how much space between the slide and carb?

@1canyonguy 5 жыл бұрын

I could not find any video,pictures or step by step directions to do this on a 1998 KLX 300. I also tried all the forums I could find.- Any help appreciated..

@cameronsalazar7527 Ай бұрын

now to do that

@doobyboy21 5 жыл бұрын

Awesome video ! Thank You ! =)

@niallschepers4132 2 ай бұрын

I've installed a new throttle and cable but when I start it, it just reves up to full throttle when the throttle tube isn't even turn?. What should I Do?

@the_ltz_guymaster7912 3 жыл бұрын

I’m have a 98rm250 and if it slide it forward or backwards it will shut the bike off or rev up

@Billy-Boggs 3 жыл бұрын

hey, I have an xr50. I bought bbr tall bars and I need a longer throttle cable. I got it on and it wouldn't twist freely/smooth and it wouldn't even start it sounded like a gas issue. I'd kick it for like 10 times and nothing. Would not turn over at all. Do you have any idea what the issue would be? Anything would be a great help!!

@Teamster542 3 жыл бұрын

Question: what is the grey looking grease under the throttle pulley? I have a 2019 TC65 and I am putting it back together but I neve knew I needed grease.. Also on the pulley collar does it get inserted from the top down or the bottom up.

@FirstGendodgegarage 2 жыл бұрын

Anti seize or grease

@coltonsites3802 5 жыл бұрын

What should i do if my throttle housing is broke (from the handle bar) Ive tried to test the throttle before i bougjt this project bike but the screws are seized in and i tried using an impact driver and only was able to get one screw out

@daltonschaefer140 3 жыл бұрын

I can't get the spring to pull up wards so I can disconnect my throttle from the needle

@Dudino1776 3 жыл бұрын

just wiggle it alot and try to do what he said and grab the top of the cable

@Yuuiiytrfbh 3 жыл бұрын

My throttle revs hard when I turn the handlebars full right. Is it time for a new cable, or do I just need the lube adapter thing? Thanks!

@rmatvmc 3 жыл бұрын

It sounds like you might need a longer cable or to check that the cable is routed correctly. Lubing the cable can't hurt so I would start with that and see if it fixes your problem.

@Yuuiiytrfbh 3 жыл бұрын

@@rmatvmc thanks!!!!

@KeepitGtv_ 3 жыл бұрын

Where can I find the throttle housing? &pulley

@montawoot8058 6 жыл бұрын

Thank uuuuuu soooooooo muchhhhhhhhhhhhhhh

@tylerstacks2207 3 жыл бұрын

I have a 2012 rm85 l 2012 Suzuki and I bought a new throttle cable from Suzuki that they said would fit and when I put it into the carburetor part and in the throttle compound there’s to much slack in the throttle part so how do I tighten the slack

@Dudino1776 3 жыл бұрын

look at 7:54

@InToTheBackroads 6 жыл бұрын

My throttle tube doesn’t snap back

@UlisesGlez26 6 жыл бұрын

I have an CR 125 2001 and I bought a new cable, but I can't get the little bolt that goes on top of my carb off of the old cable to install it on the new one, How can I do it?

@oskargustafsson4214 2 жыл бұрын

I have cable are connected with the coolant as well, can someone help?

@twelyprivat7782 6 жыл бұрын

Thank you so much!!!

@austingillespie8192 4 жыл бұрын

Hey so I followed all these steps and my throttle is super tight now with no clay. What did I do wrong?

@rmatvmc 4 жыл бұрын

Which bike do you have? Did you make sure your adjusters aren't taking out any extra slack?

@the_ltz_guymaster7912 4 жыл бұрын

I have a 94 kdx 200 and I can’t find graphics for it any chance you guys can make me a set with your name on them like all your bikes do

@rmatvmc 4 жыл бұрын

Unfortunately, we only have graphic templates back to 1995 for the KDX 200 but if you'd like to send us the dimensions of the graphics you'd need we could get something made up for you. Feel free to email attackgraphics@rockymountainatv.com with any questions you have.

@calebtaufen1283 5 жыл бұрын

Got an mx175 and the throttle has 2 in synch cables. One already connected to the carb and the other is hanging with no idea where to attach it. Any ideas??

@linussoderman3127 5 жыл бұрын

oilpump

@BlueFox788 6 жыл бұрын

I have put two different new throttle cables on my 125 and they both have excessive free play. Both adjustments are as far out as they can go. This is the reason I replaced it and I'm starting to think it's not the cable length. Any ideas?

@kaiglembocki 2 жыл бұрын

any luck?

@BlueFox788 2 жыл бұрын

@@kaiglembocki yes, it turned out the throttle I had was not for my 125, it was for the 250f

@donovinortiz1567 4 жыл бұрын

So I have dirtbike its high revving outno where when u start it up I just put new carb on it adjust the float all above nothing is right it keeps high revving by itself any suggestions why

@masonkrystock2710 4 жыл бұрын

Donovin Ortiz check your idle screw

@tyl3raz7 4 жыл бұрын

I mean yeah idle screw or something to do with the throttle cable maybe

@scottruelle2848 4 жыл бұрын

Did you ever figure out the problem? I’m having the same EXACT problem as you right now and I’m researching what it could be

@scottruelle2848 4 жыл бұрын

Brian Amideo figured out it was a binded throttle cable

@johnromero1222 5 жыл бұрын

I have a kx85 and when I twist the throttle the cable starts wide open and I can’t find the reason it’s doing that

@rmatvmc 5 жыл бұрын

*John Romero* Have you taken the carb apart to look inside to make sure nothing is getting hung up? Do you have enough throttle cable free-play? I would start with these things and make sure the throttle body and needle are sliding properly and closing. Thanks

@tyl3raz7 4 жыл бұрын

I had this problem on my yz250. It’s an 05 so turns out the cable just needed replacement

@johnromero1222 6 жыл бұрын

my throttle won't even twist is there any way I can fix it

@rmatvmc 6 жыл бұрын

Yes. You would want to pin point where the problem is occuring? Is it the throttle cable, is it gummed up and seized? Is the problem happening down in the throttle body of the carburetor? Is it a dual throttle cable system and do you have them hooked up in their correct (push and pull) position? Sometimes all cables need are a little cable lube and they'll come back to life, with smooth action. Other times you'll need to replace the throttle cable. Let us know what you figure out. Thanks for watching!

@vatorerm4675 5 жыл бұрын

Can you use WD40 instead of cable throttle lube?

@rmatvmc 5 жыл бұрын

Its not recommended to use WD40 because it isn't a long-term lube. WD40 makes a gel lubricant that would be even better. But just regular cable lube is the best. Thanks for watching!

@Muffley23 3 жыл бұрын

What if the throttle doesn’t snap back? How do I fix this issue?

@calum4860 3 жыл бұрын

Then you did it wrong ;)

@GymRat339 3 жыл бұрын

My throttle has no free play at all and I don’t know how to adjust it. Can someone help me out?

@Mikaeel84 2 жыл бұрын

👍

@keddrickfreeman4635 3 жыл бұрын

Can some one get with me I need help on my 250 Yamaha two-stroke

@rmatvmc 3 жыл бұрын

What do you need help with?

@mixgashaulass2988 2 жыл бұрын

I cant cant get my throttle to snap back

@MrKane101111 Жыл бұрын

I can't believe we have to replace the entire housing when the cable brakes. Surely the manufacturers should allow you to just replace the cable, but all the guides I see seem very hacky how to do that.

@marjanboo4196 4 жыл бұрын

ahh bro your doing it wrong if lubes come out the bottom

@kyleallen7689 2 жыл бұрын

You cut out all the hard parts

@marysavage4224 5 жыл бұрын

I've installed a new throttle and cable but when I start it, it just reves up to full throttle when the throttle tube isn't even turn?. What should I Do?

@javierdelapaz7295 5 жыл бұрын

Same thing happened to me what are we doing wrong

@niallschepers4132 2 ай бұрын

Me to how did you guys fix it ?

@johnromero1222 6 жыл бұрын

my throttle won't even twist is there any way I can fix it

@rmatvmc 6 жыл бұрын

John, try loosening the bolts that hole your throttle on and make sure that the end of your throttle tube isn't pressing on the outside of your bars. Sometimes that can make your throttle feel like it won't turn or really sticky.