How To Replace Fork Seals on Yamaha PW50
Рет қаралды 7,414
Күн бұрынGet everything for your PW50 here: rb.gy/ay5sc
Replacing your fork seals is part of regular maintenance and helps ensure your suspension operates properly and internal components don't wear prematurely. In this video, Charles shows the proper steps on how to clean and service Yamaha PW50 forks that came off a 1997 PW50, but this procedure will be the same for most all Yamaha PW50 motorcycles up to 2016.
Check out www.rockymountainatvmc.com/?u... for all your parts, apparel, and accessories!
Click Here To Subscribe To Our Channel!
/ @rmatvmc
Follow Rocky Mountain ATV/MC On Social Media!
FACEBOOK: rmatvmc?utm_...
INSTAGRAM: rmatvmc?ut...
TWITTER: RMatvmc?...
@rmatvmc Жыл бұрын
Get everything you need for your PW50 here: rb.gy/ay5sc
@bdncdn Ай бұрын
The right leg is literally servicable, I just did mine. You have the same circlips than the left leg and all parts inside are the same. Apart from that, cool tutorial. Helped me a lot 👍🏻
@user-xy8xc4pp8r 3 ай бұрын
great video, no seal, replace dust covers, and over lube with grease, got it..
@adrienneluoma1261 Жыл бұрын
Thanks for the best tutorials
@rmatvmc Жыл бұрын
You're welcome!
@chadrides914 Жыл бұрын
Can we not take apart the other leg ? The leg without the nubbin on the bottom, can we simply clean the internals?
@muntee33 Ай бұрын
12:18 in the transcript I think is why they claim the rhs is non-servicable. *If you try to buy 1, you'll probably find you need to buy both. So you'll buy both. When you would have just serviced them both and bought none if you didn't see this vid beforehand and take their UNEXPLAINED opinion.
@muntee33 Ай бұрын
The manual makes no distinction between the L & R fork legs.... What makes the R fork non-servicable?
@bdncdn Ай бұрын
It is, I just did mine 👍🏻
@levylovits 7 ай бұрын
Are these forks similar to a jr50
@rmatvmc 7 ай бұрын
Unfortunately the JR50 and PW50 have quite different fork designs.
@DarrylKurylo-jh7xu 3 ай бұрын
What makes the other leg non-serviceable? It has to come apart somehow.
@rmatvmc 3 ай бұрын
It doesn't have a snap ring inside the dust cover to take the fork apart further.
@brapbrapmafucka 2 ай бұрын
Im sure you can cut it apart on a lathe and weld it back shut
@yourselfdotcom 4 ай бұрын
Smears 20 bucks in grease in it 😂
Ichiban Moto
Рет қаралды 389 М.
Moto Blast
Рет қаралды 8 М.