Stuart Batty - Simple Bowl Turning

Рет қаралды 69,082

2 жыл бұрын

Stuart Batty demonstrating techniques for simple bowl turning to the Rocky Mountain Woodturners on November 4, 2021. He discusses his 7 fundamentals, chucking, the 40/40 grind gouge and bottom gouges.
We apologize for the lower resolution video but are using Zoom for our meetings.

Пікірлер: 47

@apachisa25 2 жыл бұрын

Great presentation Stuart. Like Allan batty. Keep teaching us . Thanks and best wishes 🙏

@123hurst3 2 жыл бұрын

I never fail to learn something useful after watching a Stuart Batty video.

@123hurst3 2 жыл бұрын

Thank you Stuart

@loucinci3922 2 жыл бұрын

Wonderful demo. Thank you do much for putting this together. Thanks for sharing.

@richardotheshort5277 Жыл бұрын

Great demo Stuart. Nice addition to all your others. Thanks!

@MrZieglertim 2 жыл бұрын

Stuart, I'm very impressed. A friend from a LOM forum shared this video with me and I must say I picked up a lot of good tips. I have turned lots of spindles for chair repair, cradles and such but now its time to learn how to make bowls. I am really interested in your sharpening jig as well. Thanks again.

@timothylarson3583 2 жыл бұрын

I throughly enjoyed taking Stuart’s five day class. If you get the chance, take his class, it is well worth it. All aspects of my turning got much better.

@andreik8013 2 жыл бұрын

Where to subscribe, Timothy?!?! I am on.

@stuartbattywoodturning7548 2 жыл бұрын

@Timothy Larson Thank you very much for the kind words and support!

@davidbaulch3223 2 жыл бұрын

Stuart is one of the most proficient technicians in woodturning today. Loved his classes while at WNTX, and love watching his videos. Battles with Mahoney at SWAT are classics.

@stuartbattywoodturning7548 2 жыл бұрын

@David Baulch Thank you David for your kind words. I also enjoy battles with Mike as well :)

@NewApologist 2 жыл бұрын

Stuart is the best teacher on technique that I’ve seen. Would love to take a class from him.

@MrTELarson 2 жыл бұрын

There may be classes elsewhere but the ones I know about are listed at: www.woodworkersemporium.com/shop-by-category/classes/ or www.woodturnerscatalog.com/docs/workshop_schedule_2022.pdf

@stuartbattywoodturning7548 2 жыл бұрын

@L Parker Thank you for your kind words. I look forward to having you in my classes in the future!

@NewApologist 2 жыл бұрын

Thanks Stuart, I believe you will be doing a Zoom meeting with the Central Virginia Woodturners sometime this year. Hope to talk with you then.

@colinchalmers1099 2 жыл бұрын

Great presentation,plenty technique and tips from the master,btw,thanks for the mention on the lathe Headstock lol….I still wonder where it might be 🤔 cheers Colin.

@la_casadeltornero 2 жыл бұрын

El mejor stuart batty

@MrAlexmoore4 Жыл бұрын

Really like this demo and love the emphasis on speed and efficiency. Watched it, practised, repeat… and understand more each time. Would be great to do a class with Stuart in the uk. I couldn’t determine from the video whether Stuart was using 3/4” or 5/8” gouges please ?

@matthewwright57 Жыл бұрын

Almost always he uses 5/8" gouges.

@garagehobbies Жыл бұрын

Has anyone found the videos or site/channel he has been talking about? I'd love to find some of his videos that he is producing.

@yas375 2 жыл бұрын

Great presentation! Thanks for sharing it. I only wish the video was shared with a better quality. 480p in 2021 is not good. Did'n Stuart talk in this video about setting up his video recording studio and be able to record in 6k? ;) And here it's not even 1080p, but just 480... Impossible to see the important details.

@stuartbattywoodturning7548 2 жыл бұрын

@Victor Ilyukevich This was recorded by volunteers at a local club demo. I'm building my recording studio from scratch and will be releasing high-quality videos later this year. Thank you for your support, and apologies for the low resolution of this particular video.

@yas375 2 жыл бұрын

@@stuartbattywoodturning7548 can’t wait!

@mileshh515 2 жыл бұрын

Does Stuart have a website with his schedule of upcoming classes anywhere?

@rmwoodturners 2 жыл бұрын

Stuart does not currently have a website. He has posted his class & demonstration schedule on Instagram.

@markrosenstand4796 2 жыл бұрын

Best by far instruction -sadly the resolution did not focus on the pitch of cut.

@joerangel9871 2 жыл бұрын

What type or brand name is your wood lathe

@jimmybrazelton8446 2 жыл бұрын

Where can one purchase the device that sets the angle sharpening that is attached to the grinder?

@hoylecurtis 2 жыл бұрын

Woodworkers Emporium has some of the tools that Stuart has designed..

@freshpootube 2 жыл бұрын

Where are these films he’s talking about?

@adgieem1 6 ай бұрын

Good demo . Good info. But I cannot hear the questions being asked. It gets very confusing at times. Are you speaking to us watching or the people asking a question. Not hearing the questions has us guessing at what you are talking about.

@user-tx8mv4mr7r Жыл бұрын

Good .good

@Huttify 2 жыл бұрын

Great content, but the audio and video could be multiple times better. Is this some sort of preview?

@hoylecurtis 2 жыл бұрын

As was stated in the intro paragraph the recording was based on the best that a Zoom meeting allowed.

@jrk1666 2 жыл бұрын

I wonder if Batty knows about the hook tools that the russian use

@craigkeller 2 жыл бұрын

Holy crap. It’s Stuart Batty for crying out loud. Why is the camera work not better?

@freshpootube 2 жыл бұрын

Your camera man needs to turn off the autofocus and digital zoom. Use a follow focus.

@andreik8013 2 жыл бұрын

What a fantastic turner. I keep watching all his presentations. What a TERRIBLE video recording. Almost ruined all his attempts to deliver.

@hoylecurtis 2 жыл бұрын

As stated in the intro we were limited by the Zoom technology we used to have an online interactive demonstration.

@andreik8013 2 жыл бұрын

@@hoylecurtis Has nothing to do with Zoom technology. Filming techniques should be improved. Do not take my harsh words - sorry - as an approach. But contact me if a piece of advice how to film is needed.

@HarmonicGrunt 2 жыл бұрын

poor Quality!

@warrenmaker798 2 жыл бұрын

WOW, I thought SB master class... U BEAUTY, then the mask. BYE

@lstember 2 жыл бұрын

The county that the club has it meetings in has/had a mask mandate at the time of recording. To allow the club to meet in person county mandates had to be followed.

@philbutcher6959 2 жыл бұрын

I only hope this insanity passes, even surgeons were writing papers about whether they were necessary or simply convention (the conclusion was that evidence for their efficacy is very weak to non-existant - I can send you links - I have studied this in depth) and now we have this whole societal legacy based on a myth - it is worse than pagan. It is young shop workers and those who are given no choice I feel the most sad for.

@mackenziewoodwoking8642 2 жыл бұрын

I really hate the picture in picture signing off now have to watch something else it’s annoying

@flattenthecurve8623 2 жыл бұрын

The fastest rim speed you want to turn is 40mph. The rim speed of the earth is said to be over 1000mph. Haha 😂, the earth is flat and motionless. Globe Earth is a Religion!!