Rob Allen Conversion to roller gun using MVD Roller Head
Рет қаралды 17,122
9 жыл бұрынWetStuff presents a step by step guide to convert your Rob Allen Rail Gun to a Roller Gun using a MVD roller head and Universal line Anchors
@robertkeaton4904 4 ай бұрын
I own a tuna rail gun and was gifted a MVD roller head. I watched this video and to drill the hole he first suggested that you need a 3.3mil drill bit. Then he suggested that he should have used a 4mm drill bit. I have the 4mm drill bit from attaching the anchoring screw at the grip of the gun. Can I use a 4mm drill bit to drill the hole for the screw already in the gun. Making sure before I even take it apart. Which size hole punch and screw would I use.
@jargo6435 4 ай бұрын
What did you do with the old hole ?
@Gearsub 2 жыл бұрын
will this work well with spearshafts that do not have the shark fin? becasue I think the rob allen shafts generally come with the cut notch not the shark fins
@coastalagenciesaustralia4897 2 жыл бұрын
It works fine with both, I have used both notch and finned shafts. I ma currently running 174ph Triple Finned 7mm Cressi shaft and I am very impressed with the it,
@tuanaznizan1812 9 жыл бұрын
how to buy that MVD Anchoring system for this?I can using a normal screw but want it more tidy and look pretty.Thanks
@MrBoonger 7 жыл бұрын
Just Contact you local MVD stockist.
@seaman1965 6 жыл бұрын
Probably very unhappy charge when the installed coil ...
@davidkoba 4 жыл бұрын
what internal diameter with this roller head fit?
@coastalagenciesaustralia4897 2 жыл бұрын
The RA Barrel is 26.5mm iD
@RoyceGetit 5 жыл бұрын
MVD or Mannysub?
@coastalagenciesaustralia4897 2 жыл бұрын
Either or, the MVD is cheaper the Mannysub is better quality but very expensive for what it is.
Creative Hacker
Рет қаралды 45 М.
Garena Free Fire Global
Рет қаралды 49 МЛН
Nikita Zdradovskiy
Рет қаралды 5 МЛН
Adam Savage’s Tested
Рет қаралды 3,9 МЛН
The Action Lab
Рет қаралды 3,8 МЛН
Garena Free Fire Global
Рет қаралды 49 МЛН