That's great! It's a great flier.

Thanks!

I would be interested in seeing those details. I added afterburner lights to the turbos but I messed up the controller so there weren't working for this video. I am waiting for a replacement controller.

Have you got a email address so I can send you some photos. Let me know when you have the afterburners working, I think a sound module would be great!

STUPID THEME SONG!!!!! :0 kzfaq.info/get/bejne/icypm69e1ayqfas.html

Thank you

Nope, no weight added. I did not paint the blades.

I am using a castle esc in governor mode. I set the motor specs and gear ratio in the programming. Then tell it what headspeeds I want and it tells me what flat curve to set. The percentage of the curve doesn't matter in that mode because it is just telling the esc which of my headspeeds I want. This video was all at 1450 rpm.

No, I didn't add any weight to the nose. I am using a 3S 2200 for a rx battery. One thing is the way this helicopter is designed it hovers nose high or slightly tail low since the mechanic are tilted forward. One thing that help mine a lot was I am able to shut off the stabilization on the cyclic to check the neutral position of the swashplate. Mine would pitch up dramatically and I adjusted the linkages to get a more level swash. The swash movement is so small on this helicopter even a small amount off level can be bad. Even though I had the gyr on for the cyclic I noticed a pitch tendency in turns. Once I got it to hover hands off without stabilization that tendency was gone.

@@pilot482 Thanks for the 411 , I need all I can get !

@@roachcoachhelis6387 anytime. I am happy to help.

Each have a good sound. They are both different but sound good in their own way.

Nope. Using a Futaba CGY755 with a R7008SB rx.

Thank you for your reply

Would you be so kind to show me were you mounted it?

Scorpion 4035 560kv

@@pilot482 Thanks a lots