Robotic placement - 3d printed automatic screw packaging

Рет қаралды 375,000

Күн бұрын

This is the beginning of a video series about multiple automation machines. It is called "the modular production system"
We start with modules that I build using 3d printing to count and package screws.
In each video we will go through the development.
00:00 Start
00:40 recap
01:39 use case
02:58 concept
05:22 prototype build
08:08 part orientation
10:08 TESTING
11:10 thoughts

Пікірлер: 371

@dirtdart81 Жыл бұрын

Such a small number of videos band such a high degree of polish. Absolutely stunning machine and it only took you a week? You're brilliant and will go far!

@marsgizmo Жыл бұрын

impressive project! great job! 👏😎

@autofctrl 7 ай бұрын

This is one of the few times I really thank YT for recommending me a certain Video. I watched the last one first but just gone back to the beginning to see the entire progress, alterations in design and features, despite I don't need such a system, it's such a very well made, greatly documented and extraordinarily presented series that to me it has become a "must watch".

@tftg458 7 ай бұрын

I'm a industrial designer and i am so jealous of this guy's knowledge and mindset...

@mavamaarten Жыл бұрын

That system with the rack and pinion to rotate/stow the shaft away is absolutely brilliant! I must say that just looking at how easily your module slots in the top of the printer is also a great show of perfect product design.

@octavio2895 Жыл бұрын

Pretty neat idea! Piling is definitely an issue that is very common in robotics. Perhaps you should allow the screw to land vertically into its own vertical chamber maybe made from a hex grid pattern like an infill? Turning it sideways before placement is also an option but its definitely more complicated.

@fredyy Жыл бұрын

Exactly my thought, add some simple dividers in the pocket, for each screw, and place them, each one in its own place. the divers don't have to be solid or go over the full height, just some bridges in the middle and some more on the top

@joshuavillwo Жыл бұрын

Exactly! Or even better, redesigning the part such that you place the screws into chambers where they are actually meant to use. Automating the placing of captive bolts in a 3d printed part could be really awesome!

@dungleanh644 Жыл бұрын

I don't understand how to tighten the belt at 7:36 Can someone explain it to me?

@good_Vibe_design 5 ай бұрын

I really like the way your mind works. It's not about whether this use case was a success or failure. As you point out, it's about harnessing an idea that can later be used and expanded for other cases.

@scruffy3121 Жыл бұрын

Hab den Kanal erst vor kurzem entdeckt. Aber die Projekte und Lösungen sind super interessant.

@cosmin6988 Жыл бұрын

Is there any chance you could go into more detail about the tensioning system ?

@widelx1259 Жыл бұрын

+1 too. It seems completely clean and crazy easy to use

@RupeTotRo Жыл бұрын

+1 Please give us a hint on what part moves to do the tensioning.

@fredyy Жыл бұрын

I think its just a threaded rod, that runs through the hole in the extrusion and pushed on the roller on the other side.

@christopherhelmke Жыл бұрын

sure, to be honest it's not really tricky. @Frederick explained it well. It's just a threaded rod that goes through the hole in the aluminum profile and is connected to the roller on the other side. On the threaded rod sits a pair of springs. The rear motor mount has a sliderail that runs in the profile. This allows you to "extend" the rear motor up to 40mm. I like that it is easy to access from the front and pretty straightforward to use. But it is unfortunately not witchcraft

@joell439 Жыл бұрын

Definitely would like see more details about this as well

@VinokDesign Жыл бұрын

Don't excuse yourself for slow video throughput. You are doing amazing! Don't loose yourself for others complaining. I'm more than happy to see these video's at this rate❤

@grifftech 8 ай бұрын

I have a print farm with 47 Bambu printers and just saw this and this is damn amazing!!! Definitely subbing!!!

@KeithSachs Жыл бұрын

criminally under rated channel, this is an amazing idea, super well done. I would love to implement a system like this to embed magnets, or potentially even automatically install heatset inserts.

@hack_jammer Жыл бұрын

real

@rightsdontcomewithpermits7073 5 ай бұрын

Yeah, people are so lazy nowadays.

@oba_kinbo 7 ай бұрын

Totally insane! This is a game changer, can’t wait to see what people do with this. And it’s really awesome to see the Bambu X1 being used as the platform to bring different technologies together. Well done!

@JmonteroArg 8 ай бұрын

People, please, stop telling this man what he is doing is a bad idea. Just let this man's mind fly! Our job is just to sit back and enjoy the greatness of his builds. What he is doing is amazing, let's all rejoice by him sharing a piece of his mind will all of us.

@tHaH4x0r Жыл бұрын

Nice to see someone actually talk about exact constraint design. Too many people who make random designs on the internet have no real clue about constraint design, and end up with a lot of issues because of overconstraint, or not constraining properly.

@ollie9397 Жыл бұрын

This is amazing, I love the use of the euro crates, the concept of the modular system, the neat and professional execution, well everything. Brilliant.

@jeffkunkler9299 Жыл бұрын

I appreciated how honest and objective you were about how this system works! NO hype and low key. However the execution is really remarkably well done and is pushing on how this type of printing could be advanced in the manufacturing space. Excellent work Sir!

@yagosantiago10 9 ай бұрын

Man, your content is absolutely fenomenal. As an engineering student I love any kind of automation and the way that you do things is just so satisfying and creative. Thanks for sharing your projects with us

@serkandurak7108 Жыл бұрын

Normally I don’t comment videos. Considering the value you are providing and the possibilities in DIY projects you are presenting, I would like to thank you. We need more creative people like you. Doesn’t matter that the automation did not 100% fit for your use case. Thanks a lot! Wish you all the best.

@cinobro6393 Жыл бұрын

Incredible designs as always!

@abdullahkose6914 8 ай бұрын

Such an amazing quality content! Thanks for sharing.

@danielwdunn Жыл бұрын

This is brilliant.

@billkellogg1403 Жыл бұрын

Hey Christopher, you will sky rocket to 1 million subscribers!! I am one of them! Please keep the honest approach and enthusiasm!

@slay3r1452 Жыл бұрын

This as absolutely incredible. I love the idea of packaging the screws in the 3d print for shipping.

@HannesMrg Жыл бұрын

Screws packaged inside the print is such an awesome idea! Also thank you for this awesome video. Explanation and animations are 100% on point.

@Trust_me_I_am_an_Engineer 7 ай бұрын

Thanks for posting this. Your equipment is very well engineered and an excellent example of where to use metal parts and where to use 3d printed ones.

@alycapo3391 Жыл бұрын

Yessss! Love your content but we need more!

@Xmoneybunny Жыл бұрын

Amazing stuff again! You are one of the few channels i have the bell icon on for haha! Keep it up!

@carlastreit Жыл бұрын

finally! was waiting for a new video, your stuff is amazing!

@cidadaoPPT Жыл бұрын

This is just a perfectionist/automation/optimization dream channel! Great job dude! Please keep sharing your amazing work!

@infiniteoffset Жыл бұрын

I didn't expect so much content when I subscribed after the screw packing video.

@JuPrgn Жыл бұрын

It's a pleasure to watch your high quality videos ! You always build brillant mechanism with a perfect engineering approach. Keep up the good work 👏

@kamhaq 7 ай бұрын

You can take to the next level by adding a camera to detect abnormal inserts, or with a robot arm to place the insert, very cool project you opened the floodgate for possibilities.

@mohamadsajadpour716 5 ай бұрын

The way you solve problems one after other is incredible. Best wishes.

@JoshuaHaasua Жыл бұрын

Extremely impressed by this design. Excited to see more!

@LordOfTamarac Жыл бұрын

Your video quality is awesome, I love the approach and aesthetic, keep it up

@absak Жыл бұрын

I normally don't comment but i have to ! Your videos are of such high quality ! It is inspiring me to make more projects on my own, please continue to make these videos ! they're super good !

@KasimirvonFinck Жыл бұрын

Christopher, all of it is brilliant! Please keep it up! Your design is clean and straight forward and I love the dispensers! I also have a XC1 printer and love it.

@oddiev Жыл бұрын

you are a freaking genius!!! specially packaging the part inside the part itself. Keep up the awesome work and hopefully we can all learn more to design like you do!

@dfx62 9 ай бұрын

I just found this channel but I can already see it's going to be addictive. Excellent ideas all around !

@piccilos Жыл бұрын

I really enjoy the engineering/problem solving you go through. You could 3d print simple boxes to store the screws in for shipment instead of manually handling bags. Peeling a tray of pre-counted boxes off a printer plate 'may' be less time and work than opening a bag and holding it under a dispenser. Also, your customers get an extra little box.

@SonicBlastGamingCSGOmore Жыл бұрын

Amazing! I want to get into 3d printing every time I see someone create something so amazing with it.

@janbutz5169 7 ай бұрын

deine videos finde ich immer voll geil. immer wenn ich mal dazu komme youtube zu schauen bzw die entwicklung meiner teile produktion zu langsam wird schau ich mir gern die videos von dir an. momentan mach ich noch keine schwierigen teile wozu ich sowas bräuchte aber die richtung selber etwas zu konstruieren ist geil

@awesomelyslowplastic Жыл бұрын

Way way way underrated channel! But it won't stay like that for long. Not hard to predict with the quality of content you deliver. Well done

@voyeger4464 Жыл бұрын

Your videos are solid gold, my friend. please keep 'em coming.

@darktherapy Жыл бұрын

The idea of holding the screws in a small chamber that the user releases them from is genius. Using strands of filament to seal them. New subscriber here.

@attilah 8 ай бұрын

Mind blown, love the creativity and the precision! I would just build the motion system for fun...same reason I'm still love putting together Technic Lego sets!

@bansci Жыл бұрын

This is absolutely fantastic, well done! So excited to see what you build next, and I can't wait to build your systems based on your designs and ideas. I want to build a bolt and nut sorter based on your loader, and absolutely love this X1 Carbon loader idea. About reliability, remember perfect is the event of good! Release your designs early, test in production and get better feedback faster. Keep up the excellent work!

@Catalysis1144 Жыл бұрын

This is the kind of 3D printing videos that I would love to watch.. Super!

@mylittleparody2277 Жыл бұрын

As usual, a very nice video and clean well thought design! Thanks a lot for sharing!

@ycy-technologies 7 ай бұрын

Dude, please print that screen adapter on top of the flattened carton box. Then, when finished, use the gantry robot to fold and form the box around it. Also, use it to throw a plastic bag with the screws in the box and fold it shut. Build an ejector and a flat cardboard box sheet reloader to restart the process and take a vacation!

@BureauSpicy Жыл бұрын

This might be my new favourite channel. I really love your videos, very inspiring.

@timryder4036 Жыл бұрын

Your videos are incredibly inspiring. I wish I had a tenth of your creativity.

@LiveEasy Жыл бұрын

Thank you for sharing.This is phenomenal work and I feel lucky that you've shared it.

@LDS-Hellgineer Жыл бұрын

i love your hbot motion system and your overall design in these projects!

@mobile.cristhianguedes Жыл бұрын

Hi... Perfect design... Can I give a tip? About the screws going out, is because of aceleration while falling down... How about putting some electromagnet at the end of the tube? You can activate electromagnet while the screw is falling, use some light sensor to see when the screw is stopped at the right end of the tube, and turn off the electromagnet, this will allow the screw to fall slowly... Sorry for my english, still learning.

@RasmusSE Жыл бұрын

Really nice! I'm definitely borrowing your clever tool holding idea :)

@neetones 10 ай бұрын

Dude, you're a genius. Brilliant work.

@eeyzas2 Жыл бұрын

seriously impressive work, there were some very clever details in that design, thank you for sharing

@alldecentnamestaken Жыл бұрын

Don't give up on this idea. I think this has a lot of potential and could totally transform what can be produced with 3D printing.

@cs16DeRo 8 ай бұрын

I was impressed, really good planning and execution! 👍

@dejan. 7 ай бұрын

Just found this but it’s really up my alley, keep innovating and documenting this for us - subscribed!

@justinpedersen9174 Жыл бұрын

Love the videos, take all the time you need to make the content and the things you want to make. We'll be here when you're ready. I know its a little early on but maybe even a second channel or YT shorts for ideas that don't fully make it into videos? You've got us hanging on every word, keep up the amazing work

@Joseph-rk7kh Жыл бұрын

You are one impressive young man! Very cool motion system with great engineering. Can’t wait to see what you do next.

@UNKNOWNMAER 8 ай бұрын

Понравилась эта работа. Очень интересно рассказал и продемонстрировал. Впечатляют записи на двери.👍

@rahix Жыл бұрын

your videos are so incredibly inspiring! here's an idea where your current design would work wonders: embedded screws into the part such that you cannot loose them. like placing a screw into a counterbored hole where the counterbore partially narrows at the entrance such that the screw is trapped inside. I always love parts where screws can't fall out, makes disassembly & maintenance just so much more pleasant

@kaischoening3606 11 ай бұрын

Super Impressive! Please continue on creating such a great, smart and high quality content!

@slothrockerz 4 ай бұрын

Absolutely Brilliant !! - You are very talented - Love your videos.

@yelsew816 Жыл бұрын

Wow! What a fascinating design! I look forward to your future videos. I want one.

@Nifty-Stuff Жыл бұрын

Wow, I'm not sure if I'm more impressed with your feeder designs, builds, presentation skills, or editing. Regardless.... KEEP UP THE GOOD WORK!!!

@shimmerite_ua Жыл бұрын

Excellent production quality of videos, keep up the good work!

@TheWatchMker Жыл бұрын

Dude such a good idea, what a badass. Loved the video, thanks for addressing questions

@deejayottof Жыл бұрын

You are truly talented and I like the way you present your designs. You seem like the person who has the whole thing designed in your head before you even open up cad :D

@theycallme_nightmaster Жыл бұрын

this is awesome. I was thinking about how to accomplish the same thing with pick and place method just this week. Very well done

@THEOGGUNSHOW Жыл бұрын

Outstanding work Sir.

@derekc423 Жыл бұрын

I think you could put a stiff brush around the end of the nozzle that drops the parts and after dropping them, just do a quick sweep left to right to make sure all the screws are turned to the side. The bristles would also serve to help keep anything dropped from bouncing out.

@unicornadrian1358 Жыл бұрын

Outstanding creativity and excellent execution! I only found your channel today and love it already. The way you sequentially build on previous projects reminds me of my favourite channel, Thinking and Tinkering / Robert Murray Smith.

@matts8023 Жыл бұрын

Great work, great content, great delivery!

@ithaca2076 Жыл бұрын

i have absolutely no use for any of this but im absolutely in love with every single bit of it.

@Terrestre1 11 ай бұрын

Incredible talent! Subscribed after 10 seconds of the first video I saw.

@tinkerman1790 Жыл бұрын

You are incredible! The concept to package the bolts is so cool 😎 I can’t stop myself to subscribe your channel asap.

@mattbdreaming Жыл бұрын

Wow! This is incredible stuff! Hope you do publish models, i would love to chuck this into the wild and play around with modules in VR. I love the entire concept!

@noriega211 11 ай бұрын

Your videos are wonderful and very informative. Thank you for a great prototyping video❤

@marijuanas Жыл бұрын

Really cool design, nice work!

@teitgenengineering Жыл бұрын

This channel deserves more subscribers!!

@Kiboz2000 Жыл бұрын

I love to see smart content on KZfaq..great work.

@jimgeroul Жыл бұрын

Most underrated channel on youtube :O keep up the great work mate.. this is amazing!!

@jiridvorak9381 Жыл бұрын

This is awesome content, man! I really appriciate work behind this video same as your advices to Prusa as it is my lovebrand. In Czechia we have proverb: "Do not fall asleep on the cloud of success./ do not rest on one's laurels " I am worried that Prusa now woke up and realized that his train already left the station

@B3D Жыл бұрын

great job . perfect tools for special use.

@AlexanderEresov Жыл бұрын

Specialised toolhead for toolchanger that places metal parts is an excellent idea. Can't wait to see something like it in action.

@sierraecho884 8 ай бұрын

This is fucking awesome. A true engineer. I also watched video from "Slant3D" a big mouth in my opinion but this is an other level, well done.

@JustCuzRobotics Жыл бұрын

This is really awesome. I am probably going to need to use some version of your screw counting system in the future for the robot kits I'm selling, I have to count and sort 5 different screws and 2 different nuts for these kits, numbering quantities 4 to 32 per kit.

@MaxMerlan 8 ай бұрын

subscribed at 0:11 - sight unseen. Very cool channel dude

@toddbrous_untwist Жыл бұрын

This is brilliant! YOU are brilliant!!

@abishekbabu8061 Жыл бұрын

That is a very cool belt tensioning mechanism indeed. It would be really helpful if you can make a tutorial on that specific part. This is a really cool project, hats of to you.

@marwanbeaino5377 Жыл бұрын

Wonderful work !!

@Tarbard Жыл бұрын

Really fascinating, thanks for the video.

@Ernestasish Жыл бұрын

I can imagine the future of 3d printing with automated placement of nuts and screws inside the 3d printed part like you suggested. It will cut cost and make 3d printing rise even more! :D