Test Rockrider E-ST 500 from 2023 Thank you for your modification I tried. So you can do 450-500 pedals cycle and then the motor goes off without say anything. You have to turn off the computer and then back on. But I did 7km and the engine went off 2 times. The max speed on the flat road 41km/h but the engine still going so you can go faster. But your battery life on mode 1 took 10% in 7km. Normally I can do 100km range on mode 1, also 65km in mode 2, and 50km in mode 3 on a flat road with AVG speed 22km/h without the hack. So what this video explain is good but your engine going off when you ride more than 3km range. I hope you guys this review helpful and you can go realy fast in mode 1 with this modification but you know the result. So I do it back for factory result because I am happy with the 100km of range. Peace and love. 😊

Thanks to Pasquale! It worked for me. Now I can go 33% faster. My magnet is 15mm x 1mm (North). I used 4x cable ties and some double-sided tape as well. I was a little concerned that the magnet and the sensor were not exactly lining up, but I got them as close as I could. And hey, it works. I'm carrying spare magnets around with me in case something knocks my magnet off. So happy!

luckily you own that whole road ;P

Thanks for the video . I have done it on my new est 900 and it works! In eco mode goes easy to 35km/h , in Standard to 40 km/h . The problem is that with new latest est 990 model , with new Brose lcd control screen , happens that after about 500 pedal turns the power assistance off. Is like the system knows that the speed sensor has been moved . To have the power back I need to off the control screen and on it again. It seems that only the new 900 est model have this problem

Very elegant hack! Much better than buying overpriced speedbox and then cutting wires! Thank you! I'm going to use this hack in 520.

I just did this today and it worked a treat, perfect mate thanks

Not all heroes wear capes

The speed in GPS showed 47km/h but in speedometer was 15 km per hour, so the motor still gave power until it reached 25 km per hour in speedometer.

I have already done the same for my Rockrider e ST 900 it works very well, however be careful not to have an accident because they watch a lot, I have unbridled my bike for a few months but I strongly advise you not to unbridle the engine if you live in a city the chances of hitting someone are greater, the brakes are of good quality that's not the question but it will take you longer to stop. We can go up to 40 km / h on the flat, beyond it is possible but it will be very hard with a motor of about 350W! At 35km / h on plato doesn't force it too much. The maximum assistance speed is 75km / h. (34/11 = 3) 25 x 3 = 75km / h Above 45 there is hardly any assistance. We pedal too fast for the engine. The autonomy is 30 km do not hope to do much more especially if you put in mode 3.

Bonita, o mercado brazuca está começando a melhorar... Pena que não fizeram XL.

thanks tested with E-ST 500 works perfectly

when i increased the max speed i just messed with the programing and got around 25 miles a hour. but burnt the motor out on 1 bike .and the mid drive motor i broke are someone broke my crank arm on the motor that was connected to the entire motor no way of fixing :( waiting for the battery technology to get better then maybe a new ebike for me .like this 1 in the video

Es facil de hacer, funciona bien. Habría que averiguar porqué detecta el truco y da el error. ¿También lo da si vais variando de piñón? It is easy to do, works fine. Just have to guess why detect the change. Does it detect it if you are changing speeds? El error aparece cada 500 pedaladas, no hace falta parar la bici, reinicias y ya està

Great video. Thank you, worked perfectly. I know the speed and distance won’t work after the modification but will the battery remaining and distance remaining still be reliable?

and now to find out how to do it on the new 2023 Rockrider E-EXPL range 😊

Bonjour, après avoir mis en place et après essai le résultat est positif pour une utilisation sur du plat et pour une vitesse supérieur à 26 Km/h sinon il faut pédaler comme un sprinter et le pignon arrière n'est pas assez petit, ou celui devant assez grand pour prendre de la vitesse, ( car on mouline) c'est vrai il y a toujours de l'assistance, le point négatif est que si on ne pédale pas il n'y a pas de vitesse inscrite et pas d'enregistrement des distances parcourues, la vitesse sur le compteur est proportionnelle au pignon que l'on utilise, en pédalant ... pour ma part j'ai remis comme c’était d'origine, le montage est vite réalisable si je dois faire beaucoup de plat !! mais pas trop dans mon cas..

i bought some of the magnets but they are not with adhesive pads, which way around does the magnet need to be should it attract or repel from sensor?

How old is your bike the new rockriders from Decathlon you can’t do this it has a restriction box now. O magnets

I did what you showed on the video and it is working fine. Speed increases till 42km/h. However the motor stops after a while and i need to reset the system. How can i avoid / solve this issue? Kind regards, jan

hey can you do one for the rockride est 100 please theres no unplug wire on the back wheel

Hello, hello! Interesting your video and very constructive ... I wanted to ask you if there is another alternative to these magnets.I mean to make you understand me, if they should be these magnets exactly (Measures-10MM / N42 or I can put other similar of the same brand ... I am Spanish and I looked at Amazon and these same do not appear, if they appear almost equal (10 MM / N35 O N50) to those in your video. If they are all the same as the ones in your video but they are black, with epoxy... would they fit me? Thank you very much and very kind!

I changed the speed limit but the motor it stopped and it didn't started again. I went to the repair shop and they fix it. I take it off again the sensor I switched of and on again and I could ride it with the maximum speeds and it is a beast. Now every time when I m taking off the sensor it showing: Error, Check the Speed Limit. Can you tell me what should I do?

You are my hero 🤘

Ty works man got 22 mph can proba get more with pumping up my tyres more

Could be put two sensor, one in each position ( near crank with magnet, and another legal) and between this a switch.

On my new e-st900 I can’t get the sensor screw undone! Wondering if they have glued it in. Not reverse thread is it?

Is there a chance that a new rockrider e st900 detects the speedhack? I have seen some people say that it shuts itself off.

Hi Just got my e-st900 and found the 25km restriction really annoying on dirt trails. If I do the hack you suggested which is brilliant BTW if sticking to around 30-32kmph would the battery drain much quicker in setting 2. Thanks

I have two questions. The first would it work on an e-ST 520 MTB? Second, is the number of kilometers you do with the bike always calculated by the bike? Thanks in advance...

I did this with my est 520 it doesnt display my speed anymore and says error but it does go fast for like 20 seconds and then it slows down because it says error. But i didnt have a magnet so is that the cause for the error?

Hello , first of all a big thank you for your great video,I come back to you to ask you a question for a problem that I encountered after making the modification, when I drive for a few kilometers +/- 5km the engine stops the assistance, Every time I restart it so that I can continue, I hope you can help me find a solution in advance Many thanks

Ciao…per caso sapresti un metodo per rimuovere blocco velocita ad una rockrider e-st 100?

Wow this is a great video. Does it matter if the magnets are North or South?

Nice Video thx for this! Only one question witch Magnet i Need for this ? Size?

ciao..ho appena comprato una 540E e chiaramente appena arriva guardo se fattibile. Avresti voglia di spiegarmi in parole povere il principio ? Cioè...il sensore , da originale , cosa legge ? e spostando perchè il contakm vede meno velocità del reale ? beh...nel caso ringrazio anticipatamente...

46 ahahahaha holy cow, you need a 50cc motor driving license here in Belgium to go with those speeds

Does it work on my e st 100 too?

Nice :) It also should works with e-ST 100 model..?

Hi, I have done this hack to my rockrider E ST 520, but sometimes I find that the motor cuts out so I have to power of the display and power on again and then it works ok again has anyone experienced the same problem?

what about est 100? it does not seem to contain the plug thing.

anyone know how to do this on a rockrider est100

I have same bike where I buy this sensor you putt in the pedal where I buy

By the way. Imagine if you had 42T in front instead of default 34T. You could easily reach 50 km/h without that crazy RPM on pedals.

Nice video! Are you happy with the bike? Any problem?

Does this trick affect the lifespan of the battery? Thanks for the help

Great but then u Lost Decathlon warrantee for thé engine ?

It worked, thank you soooo much

Avrei una domanda!!! Hai solo tolto il sensore perché non lo veda il ferro sui raggi della ruota, o anche altro??? Grazie👏

Is there a need to put a single magnet or it is necessary to put 2?

Can it be done with the est 100?

I had the same problem with my st 520. Works great for a while and them cuts out and you have to rest the bikes controller. Any suggestion?

Ciao Pasquale A cosa serve il magnete? La dimensione dello stesso cambiano qualcosa in fatto di velocità?

Hello, can you give me the references of your stand, please? Thanks a lot Sincerely

The magnet is 10 mm in diameter, but what is the thickness, 1 mm, or other?

Do you glue the magnet to the paddle or how do you put it to the pedal?

I have done it at a 2023 model. Worked for 6 km and then the motor bloked. Had to change it to the original setting.

hi, do you know how to tune this Riverside 500e?

does it also work in the e-st 500 bike with a middle pedal?

Hi Pasquale! Thanks, do you know if works the same for the new Rockrider E-EXPL 520

Can you do it to the rockrider es 100 ebike

Ciao Pasquale e grazie per questo spettacolare contributo. Posso chiederti che app usi sul cellulare? GRAZIE

Огромное спасибо!👍

Is it possible to modify the electric motor?

A bit late in the day perhaps but how exactly does it affect the odometer?

I’m having error it says check your speed sensor and it won’t work help me please

pasquale spero tu legga e mi rispondi. modifica fatta ma sistematicamente dopo 2/ 2.5 km il motore si spegne anche sotto i 25 km/h . spengo, riaccendo e rifunziona ma non credo facciano bene al motore questo continuo " problema". hai una spiegazione e o rimedio? geazie un anticipo

Where did you buy the magnet? You have a link?

Can this damage the motor or any other sensor ?

ciaoo bel video..ma dimmi,,basta mettere un magnete adesivo li sul pedale dove l 'hai messo tu...staccare il sensore...posizionarlo con 2 fascette..e niente altro?,,non bisogna entrare nei parametri del computer di bordo? solo queste 2 piccole operazioni?...dimmi dove trovo quei magneti adesivi? sono un modello particolare? forma peso?..o vanno bene tutti...? grazie mille...Biagio

where can i buy the magnet please?

Ciao, si può fare su tutte le bici elettriche delle Decathlon?

bel video !

Great Video...Thank you :-) It works well

What happens if you just remove the magnet off the back wheel?

Nice simple hack, however,it would be good if rather than removing the limit all together you could just raise the limit to 30-35 kph, Also having the newer software I feel having to turn off and back on every 500 pedal revolutions would be a pain in the bum. And also raise eyebrows if any warranty claims were required! (See excerpt from Brose Manual) “The new manipulation detection ensures that the drive detects when the spoke magnet has been attached to the crank and thus the rear wheel and crank are moving in a ratio of 1: 1 to each other. If this is the case, the drive switches off the assistance after 500 pedal turns. Error 47 becomes active and can be read out in the service tool.”

Does it work on these latest E-st 900s with the brose allround display?

Does this work on the newer versions of the est900?

can this be done on the rockrider e-st 100

what happens if you just remove the sensor without a magnet?

Good video, not got mine yet but I’m going to sort the magnets out. I’m taking the 10mm x 1mm thick is the one you have?

What about RockRider St 100 ? Et merci

Hello, the video is great. But I have a different question, in the "500" series models you can also increase the speed a bit by changing the wheel size to 30 km / h. In my case, it was enough, did you find this option in the menu? Did you or someone else do it?

hi pasquale, nice video but i have a one question!! in stead of removing original sensors, can we add one extra magnet on spokes??? i have already one magnet in spokes so if we can ad two magnet opposite direction is it ok ?? looks like a same radius as crank?? maybe i am right?? my friend did same thing with three magnet in the wheels spokes on different angles,, suggestion please

Which kickstand fits the e st900

Hello there please tell me how long last battery I need to buy this bike I work delivery so please and I will subscribe 😊

Scusa la batteria quanto dura con questa modifica?

Do you recommend buying this bike, is it worth it?

Can i remove sensor so thay increase speed

I’m planing to get this bike, how many kms can you get on city flat road with it? Thanks

Transformation effectuée sans souci Reste à trouver un plateau plus petit Si quelqu’un a des références je suis preneur. Merci

Why are you putting a magnet there?

Doesnthis work for the est-100 too?

Ciao! Grazie mille per il video! Quindi se non ho capito male bisognerebbe attaccare i magneti nel lato interno delle pedivelle e spostare il sensore posteriore giusto? Grazie ancora

Size magnet? Link?

Does this work on the EST-100 guys?

Funziona ma c'é un problema....ogni 15 min. circa il motore smette di funzionare. Devo spegnerlo e riaccenderlo, ma ogni 15 min. fa così....come posso fare per risolvere; sai da cosa può dipendere? Grazie (da originale funziona perfettamente)

Would this work on the est100

Hello,is this also possible with the st 100?

Been riding like this for a year. Now my bike stalls at 27 and gives a speed Error. Any suggestions? Greets

Thumbs up. Still, this should be a photo or a 30 second clip. Not 5 min.