Dye Sublimation Onto Glass Short Cuts

Рет қаралды 147,413

2 жыл бұрын

How we do dye sublimation onto glass in a production type setting. Only doing a couple here, but will show the short cuts we use to save time and hassle.
To see this step- by - step, see this video: • DYE Sublimation On Gla...
Links to items used: (Disclosure: I do receive a small commission if you purchase any of these items. This does not increase your cost)
Tusy 5 in 1 heat press amzn.to/3EJ0l1t
A-Sub sublimation paper amzn.to/3JxNjr9
Oracle 651 matte vinyl amzn.to/32yxPmj
Cricut Maker amzn.to/32IdL0B
Rapid Tac amzn.to/3JBYMGn
Epson 2720 Printer amzn.to/3Jykv1K
Hiipoo Sublimation ink for Epson amzn.to/3eIlpe4

Пікірлер: 434

@rogersshop 2 жыл бұрын

To see this process step by step, watch this video- kzfaq.info/get/bejne/ldxprLN2mbPUhpc.html&ab_channel=Roger%27sShop

@TheBinklemNetwork 2 жыл бұрын

seems im not the only one who enjoys the good ol' upside-down printed mug ;) mine is of a spaceship from a game so i can try to claim its all in the perspective

@Elnahna 2 жыл бұрын

Thank you for sharing and answering all the previous questions Mr.Rodger.

@tinkermccain8282 2 жыл бұрын

This was a cool video and enjoyed watching it. I am not a crafty person but I believe I could do this due to the fact you explained it so well. Thank you.

@caevans11 2 жыл бұрын

This was great! I was trying to put a design on glass using cut out vinyl. This is so much easier.

@sheryltupa4289 2 жыл бұрын

Thanks for the great tutorial Roger. Did my first cutting board and it came out perfect. I even cut my vinyl square with rounded corners to match the corners on the glass piece.

@kukync 2 жыл бұрын

I'm speechless! Never have seen this before. I just happened to come across your video. Thank you so much for sharing!

@amberwil684 Жыл бұрын

New subscriber :) I've been doing cricut stuff and sublimation for 5 years. And this blew my mind! Thank you for shared this with us all.

@FullMoonLoonDesigns 2 жыл бұрын

Thank you so much for this video. It was the first one I found on this process and I was just blown away, thought no way, how does the sub image actually go THROUGH the vinyl like that - but I tried it the same day and made my first one! I didn't have Rapid Tack but had a misting bottle with Synthrapol surfactant in it and found it worked perfectly.

@csaunders7007 2 жыл бұрын

Excellent tutorial! I learned this process not only from your video, but from your answers to the questions asked of you. Thanks, I just subscribed.

@toocraftychez8306 Жыл бұрын

Thank you so much for your video, love your layback style, easy to follow steps, think I'm going to have a go at this over the weekend. Much appreciation Chez in Au.

@accapella4U 2 жыл бұрын

Wow. Was this ever helpful. Found Rapid Tack on Amazon too. Thank you very much for sharing this info with us.

@michellerice5405 2 жыл бұрын

Roger I’m new to sublimation, not diy or crafting of about every kind, I just wanted to tell you I really enjoyed this very straight forward video, I like your no fuss style, and I learned quite a lot. Thank you Sir.

@normazaharioudakis115 2 жыл бұрын

Thank you so much I manages to make two boards not as sharp as your colors but I’m so happy I really appreciate all your tips

@BobbieBTexas 2 жыл бұрын

Your demos are awesome. Thank you

@melaniekitchen8552 Жыл бұрын

OMG I did this and it turned out great. Thank you for sharing, I'm proud of my self

@lindaalexander5539 2 жыл бұрын

Thank you for this video my cutting boards came out beautifully. You were so informative and exact.

@judimecham7320 2 жыл бұрын

Thank you so much for this video. I watched it twice I think I have it down pat. Heading out to see if I can find the cutting boards. You did a great job explaining everything. Well watch all of your videos that you come out with. 👍😊

@FullMoonLoonDesigns 2 жыл бұрын

I live in MN and searched several stores. Only found a few of the ones with designs on them already - BUT if you soak them a bit it is easy to take a razor blade or knife to the paper/vinyl (not sure what they used, almost like a coated paper) and remove it. I tried to order from Dollar Tree website but no clear ones in stock there either when I checked last night, but they have a variety pack that has some clear and some designed. I did my first one the other day after watching this video and it was so easy!

@valdirs.martins3921 2 жыл бұрын

Mestre muito bom seu trabalho, sou o Brazil e ainda não tinha visto nenhum trabalho de sublimação em vidro dessa forma. Obrigado pelas explicações; mesmo sem entender o idioma, mas somente pela imagem deu para entender o processo do trabalho! Valeu.

@jannetteperson8534 2 жыл бұрын

Thanks Roger! very easy process to follow, I may have just found my niche.

@sherrillgarrett5535 Жыл бұрын

This literally blew my mind. Thanks for sharing!

@vbelenpe 2 жыл бұрын

Your video is very informative and organized. Good job. Thanks for sharing.

@texas385homestead 2 жыл бұрын

Thanks for this info! Always looking for quick tips!

@rickswizzle4824 2 жыл бұрын

Thanks for the tutorial sir. Really got me thinking of some new ideas.

@pjfoltz8810 Жыл бұрын

New subscriber- Thanks for this tutorial - I have a cricut maker and want to get into sublimation. This is a great craft!

@MKCraftsandFamily 2 жыл бұрын

Those turned out so great!! 🥰

@debrawest3562 2 жыл бұрын

Love this idea! I'm going to have to try it.

@janettorres8738 2 жыл бұрын

Very informative, thank you for sharing. Great job.

@dorothyrose9262 Жыл бұрын

Love this idea and video! Thank you so much.

@joancaraballo1182 5 ай бұрын

Roger. Just did 18 of them and the turned out amazing. Just wanted to let you know that I transferred the rapidtac liquid to a small spray bottle (from dollar tree) and it works so much better. No waste and it is just enough for the vinyl to adhere to. No excess comes off the glass as it’s JUST ENOUGH.

@elainedaniels6541 2 жыл бұрын

Thanks for all of your information.

@letstalkhair2167 2 жыл бұрын

Love it thank you helped so much I have done a bunch of these

@vuerukozu5463 Жыл бұрын

I love your channel ! Thank you for sharing ! God Bless !

@BobbieBTexas 2 жыл бұрын

I did one today but little light but think had wrong temp. I got feet off and bought some gorilla glue and I touched it and my fingers stuck together. Finally got apart some strong stuff. Thank you love this and will make more.

@DUCKSJO 2 ай бұрын

thanks for sharing. well done and explained.

@gregbaldwin6428 5 ай бұрын

I love this idea man. Very cool

@tonie1106 2 жыл бұрын

And I love the way you do it!

@sweetlyevil187 Жыл бұрын

Great Job Roger! Thank you!

@AaronPetrosky412 Жыл бұрын

Just found your channel. Good stuff man!

@1961smudge Жыл бұрын

Brilliant tutorial thank you!

@vickifowler5069 2 жыл бұрын

Thank you again Roger!

@radicalrick9587 2 жыл бұрын

*_I'm impressed._* *_You have a new Subscriber_*

@yvonnehughes3036 5 ай бұрын

I need to try all this. It's new to me!

@webbscustomdecals Жыл бұрын

I like this roger thanks sir

@d.s.6555 2 жыл бұрын

Thank You Roger great video

@mskjohnson85 2 жыл бұрын

Awesome job

@sarahgirl1977 2 жыл бұрын

Thank you! You are awesome!

@lanaallen113 2 жыл бұрын

This is great! Thankyou!

@valenciaross8775 Жыл бұрын

Love it and thank you😊

@kacaiola 2 жыл бұрын

Thank you so much enjoyed!!

@justice2bserved107 Жыл бұрын

Thank you for sharing.

@n1peacebaby 2 жыл бұрын

You heat them on at the same time?? I thought you had to do this separately! Thus will save me a TON of time!

@anazuniga7780 2 жыл бұрын

good info. Thank you.

@carolporter7094 2 жыл бұрын

I love this! I’ve been trying to figure out how to sublimate on glass. Yours is the best! I just wonder how to cut sizes with Cricut? Ps very good explanation.

@rogersshop 2 жыл бұрын

Within Cricut Design Space, you can create pretty much any size or shape, then save project for reuse.

@jabbaremery6557 2 жыл бұрын

Great video

@loriangelilli8859 2 жыл бұрын

I love watching your videos, I have learned a lot from watching them! Thank you for sharing you processes. I have one question, how do you package the glass cutting boards for shipping? I can't seem to find a box that will fit the 8x8 cutting boards. Any help would be really appreciated!

@rogersshop 2 жыл бұрын

A combination of bubble-wrap pouch and a box with more bubble wrap. For bubble wrap and boxes, we purchase from U-Line. This may be expensive in small quantities.

@loriangelilli8481 2 жыл бұрын

@@rogersshop thank you, I saw the 9x9 boxes on there. Perfect and thank you!

@teamjesus3659 2 жыл бұрын

Thank You.

@tychemamitchell1737 2 жыл бұрын

Thanks for the tips I also sub onto glass also .can you explain how to setup the square cut of the oracle on cameo?

@rogersshop 2 жыл бұрын

I don't use a Cameo, but 7.75" square is all I use on my Cricut.

@PrinceKendrick Жыл бұрын

Roger, great tutorial but I have a situation. Over time it seems like the image fades to a very blurry image. After heating again the image comes back clear as day. Do yours have those same issues? I’ve used oracle 651 and cricut perm vinyl. Is there a way to not have this issue over time? It’s almost like a month later the photo starts to “fade away.”

@beckywilsontx 2 жыл бұрын

This is great. Thank You. Can you use Oracle 651 clear for this?

@rogersshop 2 жыл бұрын

Yes. Just keep in mind that when using clear, the color of what-ever it is sitting on will affect the image color. I've done this on plain glass with a lit back light and it looks pretty striking.

@lanadijosie7764 2 жыл бұрын

Thank you for this video. Can't wait to try it. What size do you use for the round cutting boards?

@rogersshop 2 жыл бұрын

vinyl is cut to 7.75" diameter on a Cricut for the 8" round glass boards.

@lanadijosie7764 2 жыл бұрын

@@rogersshop thank you so much for the information.

@beckymills9284 2 жыл бұрын

Thank you

@joycepugh5347 Жыл бұрын

i've watch your tutorial & I just love them - I know you have done this last year - but what is "RAPID TAC"? can you buy this anywhere? thank you very much for your awesome shares

@rogersshop Жыл бұрын

Rapid Tac amzn.to/3JBYMGn

@debbiestein4712 6 ай бұрын

Hi Roger, I am seeing in most videos for glass Oracle 651 Matte or Glossy white vinyl is used. Could you use Oracle 651 Clear instead of using a laminate sheet on the Dollar Tree glass cutting board ? I'm not gettinga good seal with the laminate. I'm making suncatchers and the white defeats my purpose. Any help would be awesome. Love your videos they are such great learning tools !

@rogersshop 6 ай бұрын

Yes. The clear works just as well.

@Abby5754 2 жыл бұрын

Thank you for your instructions. What else can you use Rapid Tac with? I want to try this but I don't have any Rapid Tac.

@rogersshop 2 жыл бұрын

I use Rapid Tac to position vinyl graphics on different surfaces as it allows repositioning easily if you don't get it on straight the first time. Plain (clean) water also works, but not quite as well.

@mistarfix 3 ай бұрын

Hi Roger! Thank you for sharing, its amazing to know, we did not have a idea that's is possible🙂 I want to ask you, can be put this chopping board in dishwasher or must be only handwashet?

@rogersshop 3 ай бұрын

Hand wash

@keelsg Жыл бұрын

Amazing! Thank you! I'll be trying this today! Just normal, permanent vinyl yeah?

@rogersshop Жыл бұрын

Any good quality permanent outdoor vinyl. We use Oracle 651 and 751

@bottlethisglassthat2576 2 жыл бұрын

Hello and what an awesome tutorial! Do you know if image could also be transferred onto matte printable vinyl? I also have a mug press and thought about possibly sublimating on wine bottles, feel free to share your thoughts on that. Thank you for taking the time to demonstrate.

@rogersshop 2 жыл бұрын

Printable vinyl (print & cut) vinyl is made differently from regular permanent outdoor vinyl and the colors tend to bleed and not stay sharp when attempting to sublimate on it. I tried this once and the results were poor. Same with HTV............Not something to sublimate to. Sublimating to glass, such as a wine bottle, will require a base to receive the dye. This can be a polyester coating, clear permanent outdoor vinyl (hard to find, but they do make it), or a white vinyl base.

@sonyagregory4719 2 жыл бұрын

@@rogersshop so we just need oracle 651..put matte side down facing glass

@rogersshop 2 жыл бұрын

@@sonyagregory4719 Adhesive side down, matte side up, facing you.

@tinafranklin1585 Жыл бұрын

Hi Roger. Love your videos all the way from Australia. Just a quick question. What can I use instead if Rapid Tack? We don't have that here. Can I use just water down dishwashing liquid in a squirt bottle?

@rogersshop Жыл бұрын

Just plain water. Don't add any soap as it may interfere with the vinyl adhesive.

@deniseliscoumb7670 9 ай бұрын

Great video Can I ask, i heard the image dulls in a few months, is thst so? How long will they stay vibrant? Thanks 😊

@rogersshop 9 ай бұрын

Yes, this can happen and I actually did a video on this. It is not a consistent problem with blurring. They will fade if exposed to direct sunlight.

@appsapps1554 2 жыл бұрын

Brilliant tutorial. One question: can I sublimate onto the white vinyl then attach to the glass or will that ruin the adhesive?

@rogersshop 2 жыл бұрын

Vinyl will deform if heat is applied without a firm backing such as the glass. Best to have it on the glass first.

@Winsumone 2 жыл бұрын

Love your tutorials Where do you buy the cutting boards or plates? I couldn’t find any at the dollar stores? Thank you

@rogersshop 2 жыл бұрын

We buy them direct at the Dollar Tree website. 24 to a case and they are delivered to a local Dollar Tree store, and we pick them up. Since I go though so many, the stores would never have enough in stock for our purpose.

@poohv22 2 жыл бұрын

Thank you so much for the video. We tried this and it works but the colours aren't as vibrant as yours, very muted with a cloudy effect. We pressed for 190secs 3 times and no difference to the colour transfer. We have a sawgrass sub printer and printed on glass settings. Any advice in getting the picture to be vibrant in colour?

@rogersshop 2 жыл бұрын

I do not have a Sawgrass printer, so not experience with settings on one. I do know that setting paper type on an Epson makes a huge difference as well as turning off high speed print and setting to best quality. For paper type (Using A-Sub paper), I set it to Premium Presentation Paper Matte.

@nikkipate-mercer8195 Жыл бұрын

Thanks!

@denisehentz9257 Жыл бұрын

Amazing process! My mind is racing with other projects to apply this process. One question that I don't think you addressed. What amount of pressure are you using with the glass?

@rogersshop Жыл бұрын

Medium-heavy.

@sherrycastro3070 Жыл бұрын

Hi Roger thanks for the tutorial my vinyl keeps coming up and not adhering g to the round .. so you have any suggestions as to what this is happening .. I used rapid tac squeegee it and let it sit for 20min pressed for 10 min to tac down the vinyl pressed for 90 min

@rogersshop Жыл бұрын

Let dry for 30 minutes- 1 hour after squeegee. Press with vinyl at bottom, graphics facing up for 180 seconds at 385 degrees. Do not hot peel. Let cool to the touch. Wet paper surface, let set 3-4 minutes, remove paper. Works 100% of the time. No pre-press.

@TheSpike1959 6 ай бұрын

Are you sublimating onto the vinyl or onto the glass? I can't work it out by watching the video. I love your straight forward approach . Thank you for the video will be subscribing.

@rogersshop 6 ай бұрын

The vinyl. To see this step- by - step, see this video: kzfaq.info/get/bejne/ldxprLN2mbPUhpc.html&ab_channel=Roger%27sShop• DYE Sublimation On Glass Step By Step

@tinaaltenau6669 2 жыл бұрын

This is awesome. Did you flip the glass over so that the vinyl is on top of the picture ? I watched it a few times to make sure lol I'm going to try it Thank you for sharing

@rogersshop 2 жыл бұрын

Yes. To see this process step by step, watch this video- kzfaq.info/get/bejne/ldxprLN2mbPUhpc.html&ab_channel=Roger%27sShop

@christinecobbins6294 2 жыл бұрын

Great video can I use anything other than rapid tack

@rogersshop 2 жыл бұрын

Plain water (good, pure water) also works, just not as well. Make SURE you let this dry before pressing or you will get blisters as any residual water will flash to steam.

@donnapletcher8473 Жыл бұрын

Only one of my first 6 or so tries came out without random blotches (maybe they’re gaps between the glass and vinyl). I didn’t see any bubbles after using the Rapid Tac and squeegeeing, so I’m hoping you have an idea of what’s going wrong?. Thank you!

@rogersshop Жыл бұрын

Possibly not enough pressure or timing/temperature is off. Here it is step by step: kzfaq.info/get/bejne/ldxprLN2mbPUhpc.html&ab_channel=Roger%27sShop

@tammygriffin4122 2 жыл бұрын

love your video..question how did u get your writing to read correct? i made one and the writing is backwards... thank you for your time...how did u mirror the image via cricut or what? for writing to be correct when u turned it over

@rogersshop 2 жыл бұрын

I do not mirror graphics in this process as they are applied to the back and pass though to be viewed from the front. If you mirror the graphic here, it will appear backwards when viewed from the front.

@ericsonmoran6449 2 жыл бұрын

Good day! I just want to ask what kind of vinyl did you use for this project? is it an ordinary vinyl sticker or HTV? I'm very impressed and I wanted to try it out. Thank you for this informative video.

@rogersshop 2 жыл бұрын

Oracle 651 permanent white vinyl. HTV will NOT work! I use the Oracle 651 since I buy it in a bulk roll. Any permanent white vinyl should work. I have found that matte works better than glossy.

@ericsonmoran6449 2 жыл бұрын

@@rogersshop Thank you so much Mr. Roger for the recommendation. Deeply appreciate it! I learn so much from all your tutorial KZfaq vlogs. Keep it going. God bless!

@TJ-yk8tq 2 жыл бұрын

This is awesome, can't wait to try. Just to confirm. You don't take the paper off the back of the vinyl to make it into a sort of sticker? (hope I'm explaining that right) If not, can it be done this way instead of using the Rapid TAC? Thanks so much

@rogersshop 2 жыл бұрын

yes, the paper backing on the vinyl is removed. Here it is step by step- kzfaq.info/get/bejne/ldxprLN2mbPUhpc.html&ab_channel=Roger%27sShop

@fionalilley5073 2 жыл бұрын

Great video. Can you use a Cricut easy press. If so what temperature and for how long. Thanks

@rogersshop 2 жыл бұрын

Yes and I have done this. 385 degrees F for 190 seconds with HEAVY pressure, so really lean on it! Be very careful not to let the easy press move or your image may ghost.

@fionalilley5073 2 жыл бұрын

Thanks will give it a try

@gerrywolfe2549 2 жыл бұрын

Since I do print & cut with the Cricut, 1 can I just cut my design the max the Cricut will allow & the vinyl the same size, Or just cut the vinyl the size of the DT trivet?

@rogersshop 2 жыл бұрын

Cut the vinyl the size of the cutting board or it will look odd. Print and cut may not allow the full width needed for the glass since it is limited by width of 8-1/2", then limited further by registration marks. I cut my vinyl on a Cricut Maker, but design and print the sublimation from Inkscape. Complex designs are done in other software, then imported into Inkscape for printing.

@yolandabranner6200 2 жыл бұрын

Awesome! what about using infusible ink. How did you do the design? You didn't show how to do the design?

@rogersshop 2 жыл бұрын

Yes, infusible ink works as well on sublimation paper. I did not show how the design was done as this is a copyright protected graphic that I have purchased the rights to. The fonts and text were my design using a designer program from Dane Graphics. They have some very neat graphics, available by membership, but the subscription is NOT cheap.

@cindigiannantoni6255 2 жыл бұрын

I am going to try this with my easy press 2. Did you ever do a video on the Easy Press on glass cutting boards? I can’t thank you enough for your calm, easy going videos!

@rogersshop 2 жыл бұрын

While you can use a Cricut Easy Press, it takes a lot of pressure and patience to not move while pressing.

@cindigiannantoni6255 2 жыл бұрын

@@rogersshop thank you! I’ll give it a try.

@cindigiannantoni6255 2 жыл бұрын

Hi, one more question: I notice you have a Teflon sheet attached to the top plate of your heat press. Why did you do that? I’ve been watching your videos on heat presses and you didn’t mention that.

@rogersshop 2 жыл бұрын

@@cindigiannantoni6255 Protects the platen in case I have a geezer moment and forget to put paper on top before pressing.

@karenk5229 Жыл бұрын

How do you attach the butcher paper to your press is it magnets or something

@annettebrandon7575 Жыл бұрын

Roger I’m interested in making an acrylic calendar with sublimation and not vinyl. Can you do a tutorial or do you have one I can view?

@rogersshop Жыл бұрын

Since I have used my big heat press to heat acrylic so I can bend it, sublimating on it (with a laminate layer) would be risky, if it works at all. The acrylic may warp or melt. I doubt that you could sublimate direct to the acrylic without a substrate to accept the dye.

@user-ie7sv1cf3q Жыл бұрын

I followed your directions and my project looks beautiful but I can't seem to get the paper from the sublimation paper off the back. Did I maybe heat them too long with my heat press....did the 385 degrees for 190 seconds? I used the same paper. Do you have any suggestions for removing the excess paper? Thanks great video

@rogersshop Жыл бұрын

Soak in water. It will come right off.

@linessareyes6546 2 жыл бұрын

Thank you for sharing, do you mirror your image?

@rogersshop 2 жыл бұрын

Since the image passes through the vinyl and is visible through the glass, images are not mirrored.

@raquellawson3191 2 жыл бұрын

Do you have to use vinyl? Thank you for the video, so awesome!!

@rogersshop 2 жыл бұрын

You cannot sublimate dye to plain glass. It does not bond. A substrate is required.

@raquellawson3191 2 жыл бұрын

@@rogersshop, got it. Thank you

@meadenaloyd7497 Жыл бұрын

Can you tell me why my design blurs after a couple of months? And I love your tutorials!!

@rogersshop Жыл бұрын

Just did a video on that: kzfaq.info/get/bejne/iL9mhdN6vp6Vmqs.html Still looking at other things, but this takes a long time since each experiment needs to sit for several months.

@jameyames3540 2 жыл бұрын

A couple of questions. 1) how did you print from cricut with the black cut line around image? 2) does the sublimanation show through the white vinyl, so you see it from the otherside/top of cutting glass? And is that permanent vinyl?

@rogersshop 2 жыл бұрын

I do not print from Cricut Design Space. I only use the Cricut to cut the vinyl. I use Inkscape for most of my graphic designs. The sublimation transfer passes through the vinyl and is seen from the front. Yes, use permanent vinyl. (NOT HTV)

@rosarivero34 Жыл бұрын

Hi. I have a question: would you like tell me what vinyl do you use to do it, it is permanent vinyl , oracle or any other please thank you so much to create videos for us.

@rogersshop Жыл бұрын

Oracle 651 or 751. Permanent Outdoor Vinyl. Links in the video description.

@brittanycasey390 2 жыл бұрын

If I use clear vinyl will the glass stay clear on parts where there’s not a picture? For example, if I want to do a 2x2 photo on a 4x4 plaque, will the plaque still be translucent where the photo isn’t applied? And the same for words. If I print out text on a sub printer and apply to acrylic, it’s always translucent. But, I want to keep the acrylic translucent and only opaque where my text and/or photo is.

@rogersshop 2 жыл бұрын

Yes, it will stay translucent, or clear, depending on the type of vinyl used. Some are crystal clear and some not-quite-so-much. I'm going to be making a video soon on sublimating to clear vinyl over glass.

@karenpaul4594 2 жыл бұрын

Now do you lay your image on top of the oracal 651? if so how does the image go through the vinyl to see it through the other side? thanks

@rogersshop 2 жыл бұрын

Here is a step-by-step video on this process which will explain everything: kzfaq.info/get/bejne/ldxprLN2mbPUhpc.html&ab_channel=Roger%27sShop

@galinag4153 2 жыл бұрын

where can i buy your candy boards.thank you

@bettiebardwell7883 Жыл бұрын

Is there another product I can use instead of Rapid Tac on my glass. Will Windex work. Thanks

@rogersshop Жыл бұрын

You can also use plain water. NO soap. Do not use Windex as it will affect the adhesive. Use of windex to clean the glass is fine, but do not use it to position the vinyl.

@michellesprout4199 2 жыл бұрын

Question when you placed the sublimation image under cutting board is it on same side of glass as the vinyl??

@rogersshop 2 жыл бұрын

Yes. Here is step by step: kzfaq.info/get/bejne/ldxprLN2mbPUhpc.html&ab_channel=Roger%27sShop

@suzannenewman9053 7 ай бұрын

Hey Mr. Roger. I'm trying to learn this process but I have a small problem. When I measure something.... say that Square cutting board....I am not the best at reading a tape measure, but when I do get say 2 inches and 6 lines past....I don't know how to translate that in to a decimal for my cricut. I know I may sound dumb, I just don't know how. Do you know any tips that may help me learn to measure and translate to decimal? Thank you so much and any time you take to answer would be greatly greatly appreciated.