Thanks as always, Joel. Just ordered one of these a few days ago. Really looking forward to it.

Ordered this rack in ROGUE red with black hardware with the single pull up bar a week ago, can't wait to get it. Thanks for the review.

I have my SML-1 being shipped right now. So excited to get it. Thanks for your review.

I should be getting mine tomorrow. Thanks for the honest review! I have 25 lb spare plates lying around that can hold this down (they're not olympic plates). Can't wait..... All I'm waiting for is plates to be restocked 😅

I have an SML-2C in blue and love it; fantastic squat stand!

Just received mine. Looking forward to setting it up. Great review.

Very helpful! First time buying a squat stand and I really didn’t know the diffeeence between pull up bars. I’m 5’8 and I think I’m gonna go with regular now :)

Thanks Joel! This was super helpful and thorough, can't wait to receive soon. Much appreciated my friend.

Awesome review. Do you recommend getting the rogue side pegs to hold plates with the sml-1 or other brand/type, or is at all the same shit? Can you fit a few on each side without them getting in the way of the loaded barbell racking placements? Tks !

great review! just ordered mine \m/

Awesome. For some reason I was only considering a full cage type…but I’m buying stuff for garage just for accessory work or make up a WOD I’ve missed during the week and maybe start a squat program that don’t have time to hang out at the gym for extra hour… don’t think I really need a full cage. 🤷🏼‍♂️Seriously considering now. Thanks

My biggest question is how does the fat skinny bar work? Swapping them out as needed? I see so many pictures of them stacked and I have no clue how to use the top bar. Also, have you tried the neutral grip adapters for the fat skinny combo? They seem like they would be super loose but I hope they’re a great accessory. I’m hoping to get my own SML 2 soon! Although I’ve heard that rogue runs Black Friday deals sometimes (although I doubt it’s on racks like this right?)

I just got mine two weeks ago. no regrets! this thing has solved my no-gym problem. I was wondering if the matador would be ok on this, so thanks for mentioning that.

Should I cancel my SML-1 order and go for the SML-2 instead? I want to add plate storage pins like you have so I'm worried I'd have to buy a pull up bar for the SML-1 anyway for stability, and if you buy a pull-up bar separately then it doesn't come with the hardware. However, I really like the low-profile of the SML-1.

I've been waiting for them to restock the sky blue color, but is it even worth the wait when I can just buy the red or black rn... I like blue.

I purchased this and absolutely love it. I had physically looked at a squat rack from Fray Fitness that was cheaper, came with more accessories, and I wouldn't had any shipping cost but I when with the SML2 even though it was more expensive and I had to pay for shipping.

If you’re taller and have a reciprocating saw (sawzall) get the skinny/fat combo and cut off the fat bar with a steel cutting blade. That lets you put the skinny bar at the highest point. I’m 6’2 and can kip after doing that.

The Titan t-3 tall squat rack at $330 shipped, after tax, on sale has been great value for me. 😊

Great review don’t see many people not loving this

Hey bud - where did you get your floor mats from?

When I release the bar from j-hooks for do some squats I hit the edge of my bumper plates and those have some scratches. How I can avoid this? Do you recommend other j-hooks? Thx for the answer

Did u ever get a new adjustable bench. I just got the ab-5200/getrxd copy and it doesn't work with the sml2 because the back crossmember gets in the way of the benches feet. You have to reverse the bench to face inside and then you can't have the rack near the wall at all. Very disappointing

do u think this will fit through a door? and can you remove the bar at the bottom easy? in the middle

What do you all think of the Monster version of the squat stand? Compared to the Lite?

is it safe to attach TRX straps to the pull up bar? will the rack try to tip forward since trx movements are done on an angle?

if this is bolted to the concrete floor, would it be safe to do gymnastic movements on the pull up bar?

Looks like TTB are practical. How are rings on it?

Where did you get those install mats?

What tools did you use to assemble your squat rack?

Where do u get that side attachment to store the weights

do you know the titan x3 wheel brackets would work for this stand too?

Were you able to do pull up without sandbag or weight on?

did you put the rack directly on top of the mats?

Ordered mine couple weeks back and its almost here. Have you looking into the hr2 conversion for it? I'm thinking about ordering a custom hr2 with 90 uprights instead of 70 and extra crossmember to make a lat pull down system in the rack

Hey man, what plates do you use?

Thanks! Where did find your attachments - ie., weight holders and dip attachment?

Can you add a pulley attachment anywhere on here?

Can you attach Lt 50 cal jammer arms to the rack.

So I have a short titan t3 power rack. I want to get something taller. Is the rml2 more or less stable than the titan t3? I do want to do BMUs on them if possible. Thanks for all the reviews over the years!

Thank you for the review. I heard the part were this was left out in the box for a long time. I have no garage, what are your thoughts of this squat rack holding up outside in the elements 24/7? Again thanks for your reviews.

Can I sit mine in the back yard under a tarp?

What tool is needed to assemble?

How does it hold up being outside?

How do I choose a home gym power rack?

Could you do Rings or TRX work on this you think if it was not bolted down? Thinking of adding the half rack conversion later on as well

Does the 3x3 posts really make that much of a difference over the 2x3 in the Rogue S-2 rack? I'm trying to decide between the two.

Great review. Do you know if there is a minimum height the standard single pull up bar should be mounted at.... I’m 6’1” but garage ceiling height roughly 97 inches and thinking about clearance on my pullups. Will probably need to modify my pullup technique a bit but can single bar be mounted at say 80 inches?

Is there a dip bar option?

Nice review just got this rack, any reason you dont go for a full power rack? Theres a conversion kit to the 390F and I'm considering it

I love my rack honestly. My lady gets pissed at me because I clean it

Has anyone converted this into the full RML-390F full rack? If so, comments....

Hey Brother just subscribed i have a question not related to this video i saw one of your videos about barbell drop pads or pound pads i was wondering if you could drop cast iron plates on them lets say 300pounds that should be ok right? Thank you and stay safe

Can I use iron weights?

I cancelled my Titan T-2 backorder and purchased this one today after your review. However, since spotter arms weren't on the stock, I couldn't get them. I know you answer X3 Spotter Arm fits SML2. What about Rep Fitness one? PR-4000 Spotter arms seem to have same dimension and pin size. Do you know if that will work with SML2? Also thank you for the great review.

Any comment on this rack compared to the S2 ? I m not sure which one to buy. Thanks

How many stall mats (dimensions included 4x6?) would you recommend with the squat stand?

Do the plate storage attachments get in the way when doing bench presses or other exercises?

I really want to buy one of these but I'm hesitant to leave it outdoors where my workout area is. Has anyone had experience leaving one outside for an extended time? (Outside of the boxes)

What's the difference between the SML-2 vs the S2 you mentioned?

👊👊

What plate tree is that? A quick review on that would be good

Can you add a pull up bar to the sml 1?

Can you add a landline attachment?

Can this rack also be used for bench presses when using an bench

Can the SML-1 eventually be converted to an SML-2 or HR?

can you do gymnastic ring workouts with this or is it too narrow? is there a rack conversion kit? What is the max height of the pull up bar?

are you sure that the dip bar fit on there !?

Can be used to work out bench press?

Can you use the same j cups for the bench press range?

Does it wobble while chinning or dipping?

Can anyone tell me the measurement from the back of the rack to the front of the posts(where the barbell rests on the j cups)?

Does it come in different colors?

Can you attach a landmine to this?

Lmao U had to be joking when you were kipping like that

No safety arms?

Will Titan X-3 spotter arms fit this rack?

Get some spotter arms please

Are you affiliate partners with anyone like coop?

Is this good for someone who is short say 5 foot even lmao 😆

why is it 800 dollars now lmao.

Stand !!!!!

I recommend just not doing kipping pullups. Man card revoked doing those😉. Just saying

This review will age well; not at as well as the rack itself.