Nice job and thanks so much for sharing your great video! Ordered ours a couple of weeks ago and the rest is being delivered this week. Cant say enough about the support from the Rogue team..Outstanding customer service. Be Safe and Be Healthy!

Excellent video, just set mine up today in my garage.

Awesome set up....I too am waiting for my rogue rm390f😁.

Good instructional and looks great in your space!

Just got mine this week! Excited to put it together. If you get any additions to the rack please share a video on it! Like you, I plan on adding more to it. Any reviews sure would help.

OMG THANK YOU. The instructions that came with this are garbage. 6 steps. To do this whole thing. You're a lifesaver!

Thanks for posting, definitely very helpful!

Thanks for the video bro, it helped me with my set-up.

About to buy this... thank you for the video!

Hey bro. Get you some earth magnets at Home Depot or Lowes to find those studs. Get the super strong earth magnets. Run it over you wall an you’ll feel it pull when you cross a Sheetrock nail. Note there’s only one big stud in my house :-)

Thanks for the helpful video. My rack just arrived and I’m sure it will help. What is the brand of flooring?

Thanks for the video. How did you determine the wall was suitable for a wall mount rack? I’m thinking of putting one in our spare room, but I’m not sure if it’s a floating wall or hooked up to the foundation.

If I were to mount the stringers to wood 2 x12”, do you see that as enough room for toes to bar or kipping pull-ups? If it won’t give enough room, then I won’t do it.

Thanks for the review. Is it possible to add the Angel security arms?

Cool! The stringer looks super handy. How far apart are the bolt holes? I have an older rig and I wonder if that stringer would work, I think mine is 5 or 5.5" apart. Thanks in advance!

Thanks for making this video, Edmon. How much did it take you to assemble and install the rack?

Thank you for the video! Just got mine and ordered the wrong depth and can’t fold into itself. Considering cutting the arms myself rather than shipping and waiting. Does anyone know if the 21.5” arms are actually 21.5”? The 41.5” arms are actually 40”.

i want to put mine in the garage, but the concrete goes up the wall 11.5 inches. i know the stringers are about 10 inches tall, do you think the bottom one would mount to the concrete ok?

Great setup, very clean! Do you think there is enough depth for performing kipping pull ups and toes to bar? I know Rogue recommends 41.5” for these movements but I’m still contemplating if 21.5” would be sufficient so I can save some space.

Is 21.5 deep enough to do inclined bench press the same way you have it(facing away from the wall) without having to reach too far back for the bar?

Just came across your video, because I just purchased the same rig for the same reason. You mention that you were doing some upgrades to the rig especially with the noise and that you were going to put from rubber grommets. Have you done so if can you help I want to do the same the grommets I got kept break off. Thank you content.

Hey awesome vid how many clips do you have to clip when folding and unfolding

Does the molding at the bottom give any issues when you have to mount the stringer?

Thanks for this. Very helpful, about to install mine. Have you been using it?

What is the length of the wall you have it attached to? How far left to the wall did you attach the stringer? I’m in a similar situation with a smaller wall and wanted enough clearance. I have about 92 inches total of wall space with a wall to my left

When the rack bars are extended out to their functional position. Do the bottoms rest on the floor? Or do they hang?

nice grey shade of paint on your wall, you got a link for it? My rack is delivery today, cant wait thanks for the review and tips

You mentioned you are getting a large mirror to put on the wall behind your squat rack. Any suggestions where to purchase or do you recommend the one you got?

Hello, can you tell me the stringers' distance from the floor? Bottom stringer and top stringer. Thank you.

Hey Edmon! Great video. I'm trying to understand how high the top stringer needs to be from the ground? Or is that variable (e.g. I can place them anywhere so long as I can do my movements in them?). I purchased this but realize I have windows lining the garage and I'm worried that they take up the space the stringers need to be positioned. Thanks!

Roughly how man inches are in between the top & bottom stringer? Just bought a rack & want to know what size mirror I should get.

Super helpful, thanks. Do the post scrape across your floor when folding in or out? Looking to install but want to use rubber mats while working out to protect floors.

Anyone have a good solution for the rattling of metal on metal, particularly the pull-up bar? You mentioned rubber grommets in the video, how did that turn out? Informative video, thanks!

Enjoyed the video. I'm waiting on my rack to arrive. Where can I find a bench like that?

Great setup. I'm particularly interested in the hardware you use to hang your pull up bar when not in use. Can you tell me what that is / where you got it? Also, did you ever follow-through with the plastic / rubber grommets to reduce the metal-on-metal clanging noise? I'm about to install my RML-3W and that sounded quite appealing (especially since I workout at night after kids go to bed). Thanks!

Thanks for the video! How tall are your ceilings? We only have 8 ft so I'm wondering if we'll have enough clearance to use the pull-up bar.

How are the 2 x main vertical bars sat in relation to the floor? Surely they have to sit deep enough to not move when taking weight, but also not deep enough so that you can fold them away? Especially on softer rubber flooring?? Assume when unfolded out there is some give in the back mechanics to enable it to drop slightly when taking weight?

What is the height of the top bracket that fastens into the wall from floor to the bracket?

How many inches from the floor to the bottom of the top stringer? I already have mirrors installed and want to know if I’d need to move them...

What is the measure between the bottom stringer and top stringer? I have a 6 foot mirror will this fit in front it? How much clearance below the mirror would I need to install bottom stringer? Thx in advance

How do you get it to be stable?! I put mine together today and it’s not very stable. I have it installed over 1”foam tiles and thinking that might be it

how tall is the pull up bar? Do you have the stringer? and is yours the 21 or 41inches?

Question for you..can't find any instructions online....for the bottom stringer, is the height adjustable? I have a 7in concrete footer in my garage that my walls sit on, so what looks like a 2-3in from floor like in your home isn't going to work, but I can't tell if the stringers can be mounted in different heights?

This video is fantastic! Quick question, the measurements that are provided in the Rogue booklet, particularly the bottom of the floor to stringer, did you follow those? Thanks again for this!

Great video. How long did it take you?

Great video thanks for posting, did opt for the 21.5" or 41.5" version. Any trouble with space when bench pressing? Thanks again!

Nice video. Thanks for Posting. I like your floor Mats. Could you please share where you got it and how is it holding up the weights?

Great video. Mine just came in and I'm so excited. You mentioned that the lower stringer can be moved higher in 2 in increments but I'm wondering to what height. I have a baseboard and an outlet and cable Jack. There isn't enough space between them. If I was to go above the outlet and Jack they top out at 15 inches. Is that too high up the wall to start the bottom of the lower stringer? My only other option is to move the outlet and Jack or just cover it with the stringer. Thanks for your advice!

Does it sit flush with the floor? Or is there a 16th inch gap so all the force is on the lags in the wall?

Thanks for the video! Can anyone let me know how's the post secured to the floor when they can also swing and folded? Thanks,

Are u gonna have space on the sides to load up the barbell?

Thanks for sharing. Ordered mine. waiting for the delivery. Quick question: Is the side orange hook (where you hanged the pull up bar) included in the package?

Hey great video, I purchased the same product and am getting ready to set it up myself. I do have a question, when the posts are folded out into the open position do the feet of the posts rest on the ground? If they do rest on the ground, do they drag when you open the posts up?

What a setup! Nice! Your bedroom upstairs or ground level? Thanks for the upload 🙏🏻

Nice setup video Edmon! Mine is coming in piece by piece as we speak. I was wondering, did you go with a Rogue barbell and Rogue plates? I've been checking with the website for the past month and haven't seen any in stock. If you didn't go with Rogue barbell and plates, what did you go with? Thanks in advance!

Thanks for doing this video. Is there a range fo me where the top stinger needs to be placed? I know the overall height of the bar just worried about placement of the top stinger

Hello one question is possibly Benc press inclined

5:24, where did you get that stability ball holder? I searched and couldn't find anything similar. I guess not purpose built, but DIY hack?

i bought this rack second hand in awesome condition! I was hoping you could help me out with the measurement height for installing the stringers, please!

Great video. Can the bottom stringer be mounted higher? I have a protrusion at the base of my wall that's 12 inches high. I want to make sure I can clear that.

Did you stick to the measurements on the paper by starting the bottom stringer at 1 and 5/16th from the ground?

Hey man how tall are the ceiling in your room? I'm wanting to do this is my garage but I have about 8 foot ceiling

Are you able to adjust the height of the stringers? Essentially, I would need to raise the bottom stringer to bypass a 7 inch ledge (cinder block that protrudes at the bottom of the wall) that’s in my garage. Also, if so, would that screw up the height needed for the top stringer? I also have limited overhead space. Let me know if you have any thoughts. Thanks!

Hi, how many feet between the stringers? Wondering if they would fit on the top and bottom of our 5 foot wall mounted mirrors?

I wonder if I have enough space my ceiling is 92🤔🤔

Hello Edmon, how tall is your ceiling? My ceiling it is only 91inches. Do you think I will be able to do pull-ups? Thanks

have any issues with floor being uneven?

Thanks for posting this. I have 4 inch foundation on the bottom clearance. Is it good okay to make the bottom stringer higher than what’s in the instruction? If so, the top stringer can also stay the same as the instruction right? About to install mine next week. Thanks bro

You said the screws to secure the stringer to the wall/studs should’ve came with the set up right?

How tall are your ceilings? Worried about clearance doing chin ups .I have 8 ft ceilings- believe that set up is 7.5 feet, right?

Great video - how thick are the mats on the floor? Are you able to easily move them?

Just ordered ours. Putting it in the garage, did you have any problems with leveling. I notice that some people put wood on the wall before putting on the stringer. Would you know why people are doing this ?

How is it for pullups/muscle ups

Edmon, Thanks for the great video! Rogue should hire you. Is the rack supported entirely off the wall or does it rest on the floor and transmit vertical load to the floor? If the load does go to the floor, do the verticals move down to rest on the floor when you rotate them out from the wall?

where did you get that wall mount for the bench?

How far apart do the studs have to be??? What’s the length of the stringer? 4 studs total? Good video man.

What extensions did you get, 21.5 or 41.5?

what is the distance from the bottom the bottom stringer to the bottom of the top stringer?

Thanks a lot for uploading this video. I'm planning to get this rack, it will be used for squats, benchpress and pull-ups (no kipping). I'm a little bit concerned since 3 little girls are sleeping one level below my workout room. I'm curious if the cage makes any noise while doing those exercises and if so, if your solution works that you're talking about around 6min. Can you let me know? Thank in advance and have a great day!

Which height rack did you go with?

Can you put the stringer higher so it goes nearly to the top of the upright post?

Edmon, thank you for the video. I am putting mine together today, and it came with rubber feet for the bottom of the poles, but I can't seem to get them in! Did yours come with them or did you forego them? Thanks for the help! Love your setup!

So when you fold it in and back out again, are you dragging the legs against your floor? I'd want the unit flush/plum but if you're able to pull it out then wouldn't the front slough, causing weight added to eventually be pulling/tugging at the bolts attached to the wall? **Sorry if you mentioned this I don't have audio

Thanks for video. What length is your barbell? Would a 6ft barbell work? Rather than 7ft?

Whats the clearance height from the base of the rack leg to the floor? I hope it doesnt drag on the floor.

when it swings out the the open position does it sit of the floor at all for support? or is the entire weight of the rack supported by the wall?

I feel like the bolts are too big for the studs. How did you make sure you didn't damage the studs while installing the stringers?

how did you figure out exactly how high to put the bottom stringer?

When you have it folded flat against the wall, how much space is between the post and the wall? I’ve got a lip on one of my garage walls where the foundation sticks out at the bottom. It would interfere with folding it flush against the wall so I’m curious how much space the stringers plus brackets provide.

How high does the bottom wall attachment can be mounted? My garage has a 13 inch cement baseboard.

Do you have enough space to do incline bench press ?? From the uprights to the wall. Thanks

What are those hooks on the wall that is holding your pull up bar?

Would you recommend assembling the whole rack and placing it against the wall so you know exactly where the stringers should be placed or do you think the process you followed by installing the stringers first then the rest of the rack was the most efficient?

What size / length lag bolts did you use to mount the stringer to wall?

04:51 ... For the part where he snaps on the weight hook thingies.

Dude I need some help. The hex bolts that goes into the cross members has a low profile hex nut. but my low profile hex nut has a nylon insert and prevents it from fully turning and tightening flush the way it should be. Did they send me the wrong hex nut or am I doing something wrong? Please let me know if you have any ideas. Thank you.

Hey great video. The electrical cord going through the wall not a good idea man. Better pull that out of the wall just in case you have a fire your insurance won’t cover your house

Quick question. Would it be just as safe to mount it to steel studs instead of wood studs?

Is that a 11x12 room?

Does the lower part of the rack slither against the floor when you fold it out?