Jeep Gladiator JT Quick Detach Mud Flap Installation

Рет қаралды 22,824

Күн бұрын

This video has been updated! Please check out the most current version here....
• 2020+: Jeep Gladiator:...
Here at Rokblokz we like to help make installs easy, so our latest video walks you through the install on the 2020+ Jeep Gladiator JT. These flaps were designed with adventure in mind and with our custom quick detach bracket they come off by hand at any point on the trail.
Find the perfect Mud Flaps for your Gladiator here:
rokblokz.com/collections/jeep...
For the full line of Rokblokz mud flap options check out our website at:
rokblokz.com
Special shout out to BDS, JKS and Fox for making awesome Jeep Lifts and suspension.
Check out Method Wheels and Wheel Pros for the best offroad wheel wheels!

Пікірлер: 54

@Ceviche956 3 жыл бұрын

Received mine in 2 -3 days thanks, just installed them on my 21 Mojave ,look great

@antifederalist22 3 жыл бұрын

Great instructional. Going to install mine now.

@muhjeepsrock3161 Ай бұрын

As an FYI...if you have a rear Anti-Rock, you will need to make modifications. The solid spacers in the mount will need to be milled or replaced in order for the RokBlokz bracket to fit. I measured the difference and used seven 5/17 washers to compensate. Didn't want to destroy the one provided if I ever go back. Additionally, the new support bracket provided will not work. Just have to go with the original bracket set up.

@Miguelmedina22 2 жыл бұрын

Just received mine quality looks excellent.

@KTMcaptain 3 жыл бұрын

Watched this 5 times before I looked at the directions to figure out where the mud reinforcements went. Haha

@derrickrees1913 2 жыл бұрын

Just installed my Black/Orange ones today on my '21 Mojave....you get what you pay for is right!

@battleboy2138 10 ай бұрын

Thank You for the very detailed oriented instructions, made things so much easier, would be nice if they came already put together for how much they cost. thank you

@Rokblokz 10 ай бұрын

Glad it was helpful!

@tf6851 4 жыл бұрын

I'm doing this today, good video and instruction.

@BCRichWarlock08 4 жыл бұрын

What do you mean by the textures side?

@Baronjvc 3 жыл бұрын

Plenty of help here in the video - TIP Much easier to do the rear if you jack up the rear body ... doing that, gave me enough room, so I could avoid taking the tires off.

@canadiangp9366 3 жыл бұрын

Great looking product and very simple installation. BTW, those Method wheels look amazing, I have the same ones on my Hydro Blue Rubicon. All I have to do is decide on black, red or blue. LOL

@Rokblokz 3 жыл бұрын

Thank you! Yeah I love those wheels! We have a gray color that would look sweet on your blue jeep too

@hartman4922 3 жыл бұрын

These flap are killer man! New York winters SUCK but these flap will ease the pain. Great product and very well thought out. I encourage anyone who wants flap for their Gladiator to try these out................G

@Rokblokz 3 жыл бұрын

Let us know how they do!

@snowlothar45 2 жыл бұрын

Do these fit with the Diesel version? Exhaust is on the right side.

@griffingutierrez3207 3 жыл бұрын

Concerned the front flaps are only attached to the inner liner plastic and the one bolt to the chassis. Doesn't this seem a. Weak connection? Should I buy longer bolts so the other 2 locations can pass through the tabs behind the mudflap that seem much sturdier? Also, should I use loctite for all the screws when assembling?

@Rokblokz 3 жыл бұрын

The front flaps should be installed behind the plastic tabs not just attached to fender liner. The thumb screws supplied are more than long enough for the application.

@coopermillard4378 3 жыл бұрын

Also, you could put the clips on the plastic tabs instead of the flaps (thumb screw --> liner --> flaps --> tabs --> clips). That would allow you to put the thumb screws in without the flaps - to hold the liners down.

@guidok3762 4 жыл бұрын

Great video, super product. Can I order it for shipping toetje Netherlands?

@Rokblokz 4 жыл бұрын

Thanks! We should be able to...we ship all over the world. You can email us for more help at rokblokz@gmail.com

@trailtothevoid 3 жыл бұрын

Just bought front and rear XL/Original ones for my 2021 Gladiator Overland EcoDiesel. Hoping that they come in quick...and don't have any compatibility issues.. (I know sometimes there are some because of different layout underneath... but fingers crossed that there aren't any for these bits.) I'll probably do a video for it as well... (Michigan-based... so weather changes constantly... I'll put them to the test! LOL)

@jesselaporte7184 2 жыл бұрын

Curious to know how they installed?

@trailtothevoid 2 жыл бұрын

@@jesselaporte7184 they installed quite easily. Hardest part was getting under the vehicle.. On non-rubicon ones there was a small piece of rear fender liner that had to get trimmed to fit proper, but other than that I rarely take them off and they do a great job with rocks/mud/snow/etc from hitting the doors and hinges. (The snow in Michigan staying off the doors is a huge benefit alone.. because of the road salt.) I could do a quick review of them on my KZfaq channel if it'd interest you.

@jesselaporte7184 2 жыл бұрын

Thank you for the reply. I ask you specifically as yours is a diesel as well. I ordered a set yesterday and in talks with company now. They said that the don’t work on the diesels because of the exhaust location being different on the eco-diesels as opposed to the gas pots. Thoughts?

@jesselaporte7184 2 жыл бұрын

And yes, would be interested in seeing a video 100%. Again, thanks for the reply

@trailtothevoid 2 жыл бұрын

@@jesselaporte7184 they told me the same. However it clears just fine. I can definitely make a quick video on them, a review after a year of running them. (Give me some time, as I'll have to do it after my vacation next week. )

@hartman4922 3 жыл бұрын

No hating man.........just goofing. Informative vid, great product............G

@plaquatra 5 ай бұрын

These were nice except the cutout isn't big enough. It rubbed the finish off my rock rail and now I have a rust stain that runs down my flap

@david99340 7 күн бұрын

Can you not cut them out a little more ?

@plaquatra 7 күн бұрын

@david99340 on my 2nd gladiator and 2nd pair. I did take a file and enlarge the hole just a bit. So far it's not rubbing after a few months

@thaas85 2 жыл бұрын

Do these fit if you have the Mopar side steps for the Jeep Gladiator?

@Rokblokz 2 жыл бұрын

They generally do fit, but you will have to create your own cutout in the front flap to account for the step.

@MrHoff44 3 жыл бұрын

What exactly does that little bracket actually do that you said to leave off?

@user-il2dr1nh7k Жыл бұрын

الحين انا اركب نفسه

@joejoethetireman 2 жыл бұрын

What do you mean by "textured" side?

@Rokblokz 2 жыл бұрын

The side with the etching, sorry our material changed a bit and no longer has the same texture.

@thatmand4542 4 жыл бұрын

Man im kinda bummed i was about to buy these for the front of my gladiator and uhhhm welp i just said oof when i saw the price for shipping.....so i didnt buy them :I ,i know its "not yalls fault" but yeah

@JackOSUrulz 4 жыл бұрын

Is it just me or are the 5/8 inch screws too small to mount plate C to plate b?

@markc1016 4 жыл бұрын

I got mine a few days ago. I feel most of the hardware is too short. I got a wrong size nut in my setup and had to leave it out. Quality control is not perfect.

@BCRichWarlock08 4 жыл бұрын

I think so too, they coulda been a little bit longer atleast.

@JackOSUrulz 4 жыл бұрын

I struggled like crazy but eventually it all fit. But forget loctite.

@leviolson 4 жыл бұрын

I thought RokBloks were WAY over priced... but after watching this install video, it seems you get what you pay for.

@mrmgjohnson 2 жыл бұрын

I've owned several sets for different vehicles, they are the best and worth every $$

@littlehozer 8 ай бұрын

Thanks for the video, i had to do some trimming on back flaps to fit my Max Tow. Great Product.

@mcwendel8066 4 жыл бұрын

What wheels are those?

@Rokblokz 4 жыл бұрын

Method 701 in bronze. Those are some of my favorite wheels! Its their new "bead grip" wheel, not a full beadlock but they grip the tire beads harder than a standard rim so you can run really low psi without debeading.

@mcwendel8066 4 жыл бұрын

Rokblokz awesome thanks! I have your mudflaps on my vw alltrack btw 👌🏼

@glenludwig5135 5 ай бұрын

Worst instructions ever. Like show which way the nuts go. Show which way everything goes. The video is so far away you can’t see anything. Be a little more detailed. The inner hole on the front. Show how the clip nut is supposed to fit. Nooooo nothing about that. The rear bench prep is garbage showing how the nuts a clip’s direction is supposed to point.

@hartman4922 3 жыл бұрын

Go ahead and stop saying go ahead cuz it makes me want to go ahead and go ahead to the next vid.................G

@fletcherbrown728 4 ай бұрын

Horrible instruction. Just put the extruded part on the textured side. WHAT the hell is the textured side? How about “the side with the engraved part number or maybe the other side. How ab out telling us if your are working on the right or left rear mud flaps. This is how to make a video of something that should be simple extraordinarily confusing. Everything going back in the box.

@Rokblokz 3 ай бұрын

We are sorry for your frustration. There have been changes made to our system and we include PDF instructions to use along side our videos to help with some of the things you need up close.