Roland Aria System-1 Dead Key Repair

No video

Roland Aria System-1 Dead Key Repair

Рет қаралды 1,808

Ken Henderson

Күн бұрын

Repair tutorial to fix dead or poorly responding keys on a Roland System-1

Пікірлер: 20

@JohnnyTakeAll 2 ай бұрын

Wow. Thank you so much for this tutorial. I have never had the confidence to open up my own synths to do a repair and thanks to you I managed this quick fix with no problems! You are a hero for this video!

@maxdiamond55 Ай бұрын

great video ken. thanks

@PeterBargh 8 ай бұрын

Thanks so much I'd watch previous videos like you and my attempted fix didnt work. Cleaning the contact on the keyboard surface didnt work, but thanks to your video cleaning the button inside the rubber strip solved the issue.

@andrewverran3498 4 ай бұрын

I had to disassemble and clean contacts twice, basically you have to clean the carbon pads and the rubber contact pads with ISOPROP untill there isn't ANY black residue on the isoprop dipped cotton buds, get a new bud as soon as it gets too black ..mine is working like new now...also you can clean the ribbilon cable ends with isoprop and tge sockets with some white photocopying paper dipped in isoprop. Hope you get it sorted. ✌️

@emilbergdahl3063 6 ай бұрын

King! Thanks so much for this! ❤

@K4OS696 Жыл бұрын

Many thanks! Cleaned contacts and now it's working a lot better.

@dr.greggeddins1723 Жыл бұрын

Thanks !! My friend !! My first key doesn’t work unless I push down hard in the back. You showed me all I need to do without worry !!! Have a great day ! You make a positive difference in peoples’ lives !!

@olivergianan Жыл бұрын

How are the keys? It worked for me but after a while, the same problem returned. After cleaning it 3 times, i gave up. I still have to find a permanent solution.

@dr.greggeddins1723 Жыл бұрын

@@olivergianan I haven’t used it since. I got a Yamaha modx 6+. I still haven’t learned everything about it.

@tomadeney8860 Жыл бұрын

Many thanks - yes have same problem with the keys - however midi out to kbd is better anyway as you can have greater range and velocity - still it is a hugely underrated synth imo

@andrewverran3498 8 ай бұрын

Hi , great video, by any chance have you had a look at potentiometers and sliders , ie best tecnique for cleaning the tracks? Thanks in advance.😊

@federicorosandi9634 2 ай бұрын

I need the same video please ! 🙏

@andrewverran3498 2 ай бұрын

@federicorosandi9634 sorted m8, just have to keep cleaning the carbon pad with a cotton swab , as soon as it starts going black , replace the swab and keep cleaning untill the cotton tip is white... Peace.

@hubertisk7069 Ай бұрын

Make sure you clean up the tape and connectors DECENTLY.

@MrCorker2000 29 күн бұрын

Could you point me in the right direction I’ve got Roland so1a that won’t turn on …

@HanweyWeasner Жыл бұрын

Thanks so much for this video I was about to throw my system one in the pool lol

@Max16032 Жыл бұрын

Honestly, the System-1 is a great synth but Roland really dropped the bar in the quality of its keyboard. I've tried this method a few times, but the same keys start to get faulty again months after. I just gave up and hooked up an external midi keyboard instead. It sounds good and all but the keyboard design is just awful.

@Max16032 Жыл бұрын

with a 5-pin midi sync cable, just hook them up and set them at the same midi channel and works fine

@johnp3541 Жыл бұрын

I tried everything and it is still the same, and Roland has no spare parts for me to buy them myself, they make me send it to the technician and the cost is very high for the repair, also practically all the potentiometers fail they go crazy...the quality of this synth is the worst I have ever seen in my life..... 500€ down the drain

@gixerags750 8 ай бұрын

Buy a carbon pen, it's like a carbon glue that makes another track 😮😊