Roland HD1 pedal dismantle and so far best fix!

Рет қаралды 20,856

Күн бұрын

How to fix Roland HD1 pedal dismantle due to loose dynamic and control.Valid for many other Roland fuss and kick pedals.

Пікірлер: 78

@joelschonewille8787 2 жыл бұрын

My god, this actually worked. I'm not the most technical of people but I followed the instructions and I have my kit back. Thanks Viorel!

@viocaia 2 жыл бұрын

Glad to help!

@kevinsargent3780 3 жыл бұрын

Thanks so much. This is very well demonstrated, and the bolt upgrade is a smart idea. Looking forward to enjoying the HD1 again.

@viocaia 3 жыл бұрын

Glad it was helpful!

@aviduke 2 жыл бұрын

Your are excellent and explaining in a clear and methodical way. A real teacher

@viocaia 2 жыл бұрын

ei..too much! But thanks!!!!

@michaelkallman4368 5 ай бұрын

Really nice instruction of how to disassemble down to rubber detail and keep up with the order of screws involved and consequently how to assemble when done. I'm sure the method of treating the tired rubber part works as well but in my case I bought some new spare ones. Anyhow, this is the best instruction of how to deal with the task to replace them. Very good Sir :)

@viocaia 5 ай бұрын

Thank you too for appreciation.😁

@tonyl9085 4 жыл бұрын

Thank you so much I can enjoy my drum kit again! You are amaaaaaazing!

@viocaia 4 жыл бұрын

Rock on!

@viocaia 4 жыл бұрын

Hey Tony! Give me a hand and subscribe! Thanks!

@tonyl9085 4 жыл бұрын

@@viocaia I thought I did already, my apologies. Here it comes!

@viocaia 4 жыл бұрын

@@tonyl9085 Thanks!

@paliki 4 жыл бұрын

did It!! works!! Thanks for the video!

@viocaia 4 жыл бұрын

You're welcome!

@emmanuelcolomby3622 2 жыл бұрын

Thanks for your good advice, it's very nice

@viocaia 2 жыл бұрын

Thank you too!

@Eucsneto 3 жыл бұрын

Thanks so much... I will try that this week before to buy a new rubber.

@viocaia 3 жыл бұрын

Glad to help

@marevadizznee3890 3 жыл бұрын

Thanks to you, it works like a new drums ! 😁

@viocaia 3 жыл бұрын

Nice!

@TheAshleyJones 4 жыл бұрын

Worked for me. Thanks!

@viocaia 4 жыл бұрын

Glad to hear that! Don't forget to use grease again once in a while, it keeps the rubber elastic.

@ElodieLemaitre 10 ай бұрын

Perfect ! It works again ! Thank you 🥹

@viocaia 10 ай бұрын

Thank you too!

@anthonybrindamour3830 2 жыл бұрын

I've seen a few different fixes for this. Roland can't seem to solve the issue years and years later. I wonder if making the sensor mount just a little higher would solve the issue. Has anyone tried doing that?

@viocaia 2 жыл бұрын

Let's wait..anyone?

@keithreynolds 2 жыл бұрын

My HD-1 drums fixed today… thanks for the help. But how long before the rubber parts split I wonder! K (:

@viocaia 2 жыл бұрын

I don't know how long will take until split apart..so far nobody complain...but glad it's working!

@aliolgun899 4 жыл бұрын

hello what are the characteristics of the oil you are using? Can I use grease?

@viocaia 4 жыл бұрын

Yes, you may use grease.Be careful with the cuts, no to deep but enough to let the piece bend easily.

@aliolgun899 4 жыл бұрын

@@viocaia thank you so much. You have created a very useful content. Greetings from Turkey

@viocaia 3 жыл бұрын

Hey Ali! Will help me with subscribe! Thanks!

@DANWRIGHTITIS 2 жыл бұрын

A friend asked me to change the ´broken sensor it their HD-1 pedal. As you just proved.. 90% of Electric problems have a Mechanical Solution!! Let you know how i get on.... Thanks for the tips. The Kid will be happy.. but maybe not His mother.. x Cheers from Madrid.

@viocaia 2 жыл бұрын

Don't let the talent waste! Glad to help and let us know how it goes.Tell mother to be proud..is not easy to be a drummer!

@DANWRIGHTITIS 2 жыл бұрын

@@viocaia I first sent them your video - suggested they try to fix it themselves and save the repair money towards a proper drumkit ;) I spent EVERY weekend morning from age 8 armed with tools or under my dads old cars I had to EARN my Guitar lessons! Was preferable to church. I have a photo of me age 9 changing the valves on an old Merc !!

@viocaia 2 жыл бұрын

@@DANWRIGHTITIS I believe our nature..or God, make us to be useful! We have to use The Time in a proper way! So I think a non-hobbiest of any kind...cars, electronics, music, literature..arts in general..cooking and why not drinking..is living an empty life.How can you live without the happiness and satisfaction of your own makings ! BTW, here we have a say '' you don't learn skills, you should still them!'' Nice meeting people like you! Good luck!

@caqueto3347 7 ай бұрын

very smart solution :-)

@viocaia 7 ай бұрын

It's ok, thanks!

@stevenkuijpers6617 3 жыл бұрын

What if this method didn't work? Is it possible that my sensor itself is broken? If yes how do i fix that?

@viocaia 3 жыл бұрын

Look here jonbondy.wordpress.com/2012/06/24/fixing-the-roland-hd-1-kick-pedal/

@stevenkuijpers6617 3 жыл бұрын

@@viocaia thanks lot man, i'll look into it!

@philipspencer7059 Жыл бұрын

worked for me

@viocaia Жыл бұрын

Nice!

@MrDarioni 4 жыл бұрын

I took my rubber upside down and pedal is working very nice now.

@viocaia 4 жыл бұрын

Good to know!

@MrDarioni 4 жыл бұрын

@@viocaia Im not shure how will efect to senzor,,, i hope ill be fine....

@viocaia 4 жыл бұрын

@@MrDarioni I don\t have the pedal anymore but looks like you can't flip it , doesn't feel like the shape is proper, but you may try and let us know about results!

@MrDarioni 4 жыл бұрын

@@viocaia i cant put a picture here, but its working....

@MrDarioni 4 жыл бұрын

well.... i have open close hihat control.... but i got only open and only closed cimbal... shape is problem, you were right.. Il try your way....

@nelsondasilvaandrade3374 4 жыл бұрын

Meu sensor não estar pegando o que eu faço

@viocaia 4 жыл бұрын

Talvez não seja flexível o suficiente ou a uma grande distância do sensor ... existe algum som?

@imrevass5556 Жыл бұрын

Magyarul nincs?

@viocaia Жыл бұрын

Nincs magyaro 🙂

@yannbailly6125 5 жыл бұрын

En cas de problème de volume sur le FD8, avant de toucher à cette pièce (marteau), essayez l'aménagement suivant, simple et très peu coûteux: @

@viocaia 4 жыл бұрын

Hey! Just give me a hand and subscribe ! Thanks!

@NICKDRUGSTORE Жыл бұрын

Awesome! That’s fixed it! Thanks for the video, the beers on me if you can find me… 👍

@viocaia Жыл бұрын

Who knows..it's small world! Glad it's working! Cheers!

@MrBelenofonte 4 ай бұрын

No necesary to cut the rubber, mix 200 ml oil with 3, 4 ml of alcohol, put the rubberinto the mix in a botle during 30 40 min with some of hot aplied to the mix and put over a radiator temperature or some hot and the rubber recover the flexibility anothe time

@viocaia 4 ай бұрын

Good idea, thanks for sharing.

@gustavsund6448 3 ай бұрын

but still dry upp after a while.

@viocaia 3 ай бұрын

@@gustavsund6448 of course, grease again..and again

@viocaia 3 ай бұрын

@@gustavsund6448 Hey Gustav! You may try some other recipes from people commented to this video

@Yes-gz9qs 4 жыл бұрын

No need to damage the rubber at all. Simple fix....Boil the rubber bit in water for 15 min then add oil and boil for another 5 min and presto,good as new.

@viocaia 4 жыл бұрын

Turns back stiff after..it's just bad quality stuff..

@viocaia 3 жыл бұрын

Please help me with subscribe! thanks!

@wboy30 3 жыл бұрын

Thanks, it's perfect. Maybe something squishy. I have put silicone grease on it after boiling it. I guess it will get tougher in time.

@Yes-gz9qs 3 жыл бұрын

@@wboy30 unfortunately it goes hard again after a period of time. I ended up doing what this guy shows in the video. It works permanently. Cheers

@wboy30 3 жыл бұрын

@@Yes-gz9qs Ok, thanks

@toyvers 3 жыл бұрын

The heat from a hair dryer resolves more easily, causing the molecules to return to their natural state and the rubber will be flexible again, without damaging the integrity of the piece.

@viocaia 3 жыл бұрын

Good idea!

@chocobloc7765 3 жыл бұрын

I tried your hair dryer tip (5-7 seconds) and my rubber pad literally melted. It's now a sticky piece of gunk, irreparable.

@issinhoSJN 4 жыл бұрын

It is impossible to open this pedal without breaking the plastic pin that holds the trigger sleeve. The engineer who did this will burn the eternal fire. So there are these weird bolts and nuts to the original there. To fix this designer's mistake. I broke my two pedals for that.

@viocaia 4 жыл бұрын

Exactly what I said, It's a kind of ''no fix'' design..buy a new one.But, it can be done with a little skills and ingenuity.

@issinhoSJN 4 жыл бұрын

@@viocaia Thanks for sharing!

@viocaia 3 жыл бұрын

Hey Will! Please help me with subscribe ! Thanks!