I like the low rise bed cage better then the traditional one

the low profile rack for sure...

Yeah the No5 for me 👍 because if you add a raised cargo bed... N05 rack/rollbar has tie down "rope rails" The tail gate is a winner! 👍 Nice work Josh 😁

Definitely vote for the low profile rack

G'day m8.... Cheers for the new STL's, few items there i can use to go with the Cliffhanger interior an cage prurchased a while back🤔. I have done the whole interior in ABS😷, and after watching the"Fate of The Fordyce" series🤮 , im going to incorporate the see thru Hood/bonnet and your VS410 2JZ🧐. i have a small print farm now with a modded Ender 3v2( that you advised me to get in 2020), and this yr i got a new mid size 4k Nova3d Resin MSLA🤯, and a week ago i got a new excess stock in box Kywoo3d Tycoon Max🥳. Cheers Josh ol son for getting me addicted to the crawling and Printing thing😵‍💫. from A M8 Downunder😎

That tailgate really ties the room together, dude.

#5 for sure. Need to do a video of your rc collection.

I like the new display shelves.

I like both racks, the tailgate is very cool !

I gotta go with bed rack #5. Looks way better. And like you said, less likely to take damage.

Like button energized.

Low profile roll bar with the tailgate!

I like the lower profile bar setup. Another great video! Asplenia.

low profile with a backrack!

fantastic tailgate! leave it black... it looks great!

Love what you did with your Fordyce! Josh

I vote for #5 . The low profile one would hold up better. Both look great.

No 5 low rise, looks awesome.

I liked the one that was on it at the start of the video. low profile with a little flair

you can do both for the roll cage. Instead of the long bar going straight back, kick it down then back. It would between both styles. Looking good!

I like the low rise version, with the tailgate!

I like both, but I gotta agree, I like the lower profile just a bit more.

Definitely 5, low profile rack!!

No. 5 is the best look for my taste.

Mambo no. 5 wins though the other one is nice too, tailgate looks good and fits the black panels on the doors.

We’re team tailgate 100%!

Love the prints! Yay! Can’t wait to print them out. Thanks in advance! ✌️

#5 would be my vote for the cage. And Vanquish should make a tailgate available for the Phoenix/Fordyce bed. That looks nice!!!

Low profile for sure. Both look good, but I think no. 5 looks tough and fits the build better

Hey josh...❤ these builds. Think you should combine both rear roll cages. Maybe add lower brace off #5 to add more structure. Add rear spare tyre in your bed possibly. Rear tailgate is sweet. Need couple of lights on roof or off rear cage...couple of hella type round lights with yellow lenses. 3d print couple of wide arches for front that dont hinder turning of wheels or suspension...h. d imprinted on them with couple of added lights 2mm led fitted. Cable neat underneath. I know you cut fenders off but raise new ones print in areas for socket screws to show as the attachment points. Maybe even add into print a tapering off running board. Under running board add rock scrapers...made in metal tube as your good at this.... You could 3d print an interior actually using your face as the driver....top part of seats n top of dash with top of steering wheel. Add some white graphics to body to bring the white hood colour through build. Few ideas for you....maybe even spray wheels white??? Love these builds...keep em going. Peace.

Great week. Good choices on the gear set. I like the low profile rack set up. The first one that was on the truck. I want the turbo set up hahaha. Maybe you will get a good spin this week. Fingutes crossed. I mean.... your still running the stock rims.... Hahaha. I'm digging that tail gate.

The low profile rack looks best for sure!!!

Yeah the low rise roll bar setup.

Love the option 5 roll bar and tailgate. Would be cool is the tailgate was hinged and latched somehow. Probably a pain in the ass to design but...just a thought

I like the low profile roll bar it would be cool if you did the roll bar and tailgate in white

Definitely the low profile cage ..I like different..rear door looks awesome 👌

I think with that sweet tailgate, do the headache rack and bed rails. Sans tailgate, I would say go with the roll bar

I think the bed should have a dozen or so duck-sized horses in it.

#5 for sure

Praise Wheel.

The traditional roll cage (#6) is just predictable. The low pro cage (#5) adds a ton of style to the build. Simple gear mod and the truck will handle as good as it looks! 👍 Keep up the great work.

I much prefer the #6 cage. It looks sleeker and cleaner.

Low profile all day!

#5 it's my favorite

I like the low profile better and love the tailgate

Low profile bed rail for sure. This series is really making me want a Fordyce. I need an updated straight axle rig. The old ar44/3 gear flat rail is getting a little dated.

My votes the first one

By far the best options for the Fordyce. Awesome job Josh keep up the great work your doing

Lo profile has my vote

Low profile cage for sure.

Low one with a rack across it would look good.

On the number six cage, I put a number plates inside that empty area

I'd go #6 but fill in the sides with a mesh or screen... partially. Looks good anyway you do it though.

I would go with the low profile version, as I think it looks better and is less prone to damage as you said

Low pro rack in the back is the stronger option and better looking IMO!…

Number 5

The LP rack for sure

low profile 👍

Next Week…NO 3D printing Again!! Styrene that Interior!!!!! Come on wheel….

Great bed rack ideas for folks to choose their own favorite. I also like the tailgate as well. Great progress so far.

I like the low-profile rack. Also, some feedback on the music. Playing music in your video during a 2-3 second gap between voiceovers pretty jarring. I think your videos would be better if you just left those segments silent.

I'm with you I think the low profile one looks better 🙂

Low pro with the rack like the computer sketch. On number 6

I like the low profile! I really love the upgrades you are doing.

Prefer no.5 think you should print both cage and tailgate in white to match hood

5>6 for sure. Also the HD in the tailgate should be white

Lowpro!

I think the tail gate should be white to match the hood!

Good video Josh!! I vote for the #5 low profile version.

No. 6 would be awesome if it was metal, but 3D printed I would go for No.5

My favor is #5,and no tailgate,great add ons looking great

3d Printed Parts look Great! Any way VP could offer them as a injection molded and Color Matched Lexan option Parts?

My vote is for #6 low profile roll bar. Looks great and I think it will hold up better in the long run! Also lovin' the tailgate! Great job on the designs!

The low profile bed rack looks better on that truck

Lower Profile with the tail gate if possible

LoPro fo sho.

It would be cool if @Vanquishproducts made a bed cage that you could give the bed sides more of a pinch.

So nice, I assume these will fit the Phoenix? 😊

the low profile looks more modern and would be my choice..

I prefer the low profile rack. I think I need to print that tailgate. Would that fit the Phoenix Portal (original kit)?

# 5.. turn n out 2 b a cooler ride..

I’d like 5 with a basket

The wheel of not ideal!

Make a 3rd cage midway bake!😅

I noticed you didn't link the gear and spool that you installed. Did you remove and reinstall stock gear and spool after installing the 21% OD gears in the transmission later on?

Was just wondering what was the part number for the lockers you put in

Dude will that Tailgate fit on the Phoenix. Looks awesome.

low profile roll bar

I know the bodies are not the same but will the rollbar and tailgate fit the phoenix? I have the interior cage for the phoenix and would liek a roll bar in the rear as well. Thanks.

Any chance youre selling the low profile bed rail? Preferably already printed

low bar is better looking, also will these fit the phoenix bedsides (crosses fingers)

Number 6

Low profile!

Low profile for sure

Lower profile

Do you have the print file for the low profile one I don't see it on you site.

You could stiffen up the long rails on rack 6 with some numberplates like in a pre runner or some jerry can mounts. I just kinda like the looks of the longer one, but have the same concerns about durability. Be good all.

Low rails and headache rack

😵‍💫

Please share the turbo and the roll bars 👍🏼