Roofs in Revit with Balkan Architect

Рет қаралды 74,324

Күн бұрын

I am super excited to welcome Milos, aka ‪@balkanarchitect‬ , back to the show! On this episode we will be breaking down how to model roofs in Revit. We're going to start off with basic concepts and settings of the Roof tool in Revit and then jump into more complex and integrated roof systems...
So sit back, relax, and let's geek out!
Links Mentioned:
Join the BIM After Dark Community Today - community.bimafterdark.com
Episode 70 with Milos - • Revit as a Design Tool...
Subscribe to Milos - ‪@balkanarchitect‬
Follow Milos on Instagram - / balkanarchitect
Milos's Patreon - / balkanarchitect
TimeStamps:
00:00 Introduction
01:27 Join the BIM After Dark Community Today
04:55 - Welcome Milos (Balkan Architect)
09:55 Creating a Roof in Revit
13:30 Cool Stuff with Slope Arrows and Revit Roofs
21:30 Attaching Walls to Roofs in Revit
30:41 Tips and Tricks for Flat Roofs in Revit
37:00 Building a Complex Residential Roof in Revit from Scratch
58:00 Outro
Here are some links to all of the hardware and software I use:
My Main Revit Computer (BIMBOX) - bimbox.bimafterdark.com/
How I Record My Tutorials (Camtasia Studio) - techsmith.z6rjha.net/zVvgW
My Microphone (Blue Yeti USB) - amzn.to/3992DYy
My Studio Headphones (Sennheiser HD 600) - amzn.to/2PxTFwj
My Camera for Videos and Images (Canon EOS 80D) - amzn.to/32zbpg5
The Lens I use for these videos (50mm) - amzn.to/3cvIE8D
My Webcam for Webinars (Logitech C922X) - amzn.to/2wP3AHf
My Favorite Sketchbook (“Blank” by 30x40) - amzn.to/32yAffZ
My Favorite Sketching Pens (Sharpie “Fine”) - amzn.to/3c8r8qO
Greatest Sketching Marker of All Time (Sign Pen) - amzn.to/3ceAukN
** Some of the above links are affiliate links, meaning you don’t pay anything more but I may get a small commission for a sale… Cheers! **
Music: Sexy from Bensound.com
Music: Badass from Bensound.com
Music: Happy Rock from Bensound.com
Thanks for watching " Roofs in Revit with Balkan Architect " !!

Пікірлер: 107

@balkanarchitect Жыл бұрын

This was fun! Thanks for having me on! :)

@TheRevitKid Жыл бұрын

You're welcome any time Milos ! Thanks for coming on and dropping some awesome knowledge bombs...

@Ruma_studio Жыл бұрын

Thanks for sharing

@amrutkalyani Жыл бұрын

@@Ruma_studio did you try it

@studioEARL Жыл бұрын

That was great, suggest checking out Mika Nari's comment and the replies.

@asiab2335 Жыл бұрын

@@TheRevitKid Balkan Architect has the whole army with bomms, his yt channel is extremely helpful, try to invite him maybe for tips&tricks with Curtain Walls or Adaptive Families? He explains such struff really well.

@rosystanboulian Жыл бұрын

This video saved my life! thank you both for this amazing collab!!

@TheRevitKid Жыл бұрын

Cheers!

@Persiandove 6 ай бұрын

Balkan architects has helped me sooo much during my university and career I can't even express. thank you thank you. also TheRevitKid, you are awesome!! thanks for this video

@TheRevitKid 5 ай бұрын

Cheers! thanks for tuning in!!!

@irfanafridi9427 Жыл бұрын

That's Amazing and very important to us thanks to both of u , keep up the great work.

@TheRevitKid Жыл бұрын

Cheers! Thanks for tuning in!

@asiab2335 Жыл бұрын

Than was awesome trip into the roofs' world gyus! You're my two favourite BIM guys (apart from Nicolas Catellier from RevitPure and Aussie Bim Guru-Gavin Crump). Thanks for tones of tips!

@TheRevitKid Жыл бұрын

Thanks for tuning in!

@speedysone Жыл бұрын

I could have used this years ago, it would have saved so much frustration. I will bookmark it for my beginner friends! Thank you both.

@TheRevitKid Жыл бұрын

You never stop learning 😁

@andrescalderon6159 Жыл бұрын

It is amazing to see you both, thanks to you I have learned a lot about revit, I have always wondered if you are related, you look like cousins or brothers, ajoajao. Thanks for all the tutorials

@TheRevitKid Жыл бұрын

Haha we are not related… or at least we don’t know if we are! :)

@gireshpt1 Ай бұрын

Awesome session

@FarhaNzAsyraf Жыл бұрын

1am when live going on. But not miss to watch this at the morning. Good approach n well explained by Balkan architect.👍👍

@TheRevitKid Жыл бұрын

Cheers! Glad you could tune in!

@shevarbeckford9176 Жыл бұрын

You guys are amazing continue to inspire and educate young architects we appreciate you guys much love form 🇯🇲🇯🇲

@TheRevitKid Жыл бұрын

Cheers man!! Thanks for tuning in and the kind words!

@shevarbeckford9176 Жыл бұрын

No problem 👌🏾

@derickmusinguzi Жыл бұрын

This is so open for both beginners and advanced Revit users. Thanks, I have been following @balkanarchitect for some time.

@TheRevitKid Жыл бұрын

Cheers!!

@AUSSIESPANIARD 11 ай бұрын

fantastic! shared it on all my social network, also on Linkedin Thanks Soooo much!!

@TheRevitKid 11 ай бұрын

Cheers! Thank you!

@rocky8004 10 ай бұрын

Awesome teaching Sir

@gemmapromano 8 ай бұрын

wow excellent! super helpful ill try this another ideas. Thanks be to God

@TheRevitKid 8 ай бұрын

Cheers!! Glad you enjoyed it !

@ramiroalvarez9968 11 ай бұрын

You guys are awesome.

@TheRevitKid 11 ай бұрын

Thank you!

@davidasbury6496 Жыл бұрын

Well that switched on a few light bulbs with a couple of roofs I struggled with. Awesome.

@TheRevitKid Жыл бұрын

Glad it helped!!!

@andresvaldovinos3779 Жыл бұрын

Muy buena presentación, gracias a ambos !

@TheRevitKid Жыл бұрын

Our pleasure!

@ebshusha 11 ай бұрын

wow this was awesome. Learned a lot...

@TheRevitKid 11 ай бұрын

Cheers! THanks for tuning in!

@yuriistoliar7061 Жыл бұрын

really gorgeous!

@TheRevitKid Жыл бұрын

🤘

@marciaperseguim2906 Жыл бұрын

uAU! Amazing videos!

@fazil3153 16 күн бұрын

Such a beautiful vedio ❤❤

@aliroshanbin3655 2 ай бұрын

Appreciate it From Iran🙏🏻

@Ar.Inamurrahman Жыл бұрын

Great tips

@TheRevitKid 11 ай бұрын

Glad you think so!

@jamespriester9258 Ай бұрын

Thanks!

@TheRevitKid Ай бұрын

Cheers!!

@salofranca Жыл бұрын

Muito bom... obrigado

@nunsalam Жыл бұрын

Thank you very much for your great demonstration of Roof modeling, Balkan. BTW, are you still using the Revit tool under student license?

@studioEARL Жыл бұрын

finally had time. Thanks. very informative... now need to think about what & how to incorporate it in my workflow. also, just thought of a use for cutoff level maybe. Vaulted with flat center ?

@TheRevitKid Жыл бұрын

Thanks for tuning in… I could see cutuff level and vaulted ceilings… perhaps

@Noahma3 Жыл бұрын

A quick scenario for use with the cutoff would be when having to deal with height limits imposed by the city / jurisdiction. Say here in Colorado most areas have a 35' height limit (measured in some of the most insane ways). This would be a good way to quickly model a hip roof that may impose on that height limit, and set it to have a "flat spot". Makes it easier than using the hole tool to pop a hole in the roof to model out the flat spot.

@TheRevitKid Жыл бұрын

I guess I could see that being a way to visually SEE where the cutoff would be… But, my point was you could easily do that within your sketch of your hip roof… That’s all. I get your point, though.

@ramiroalvarez9968 11 ай бұрын

One of my goals in life is to one day be on your show!

@TheRevitKid 11 ай бұрын

Cheer man! ❤️

@SaHo257 3 ай бұрын

nice

@revitelke Жыл бұрын

👍🏻Simply the best.

@TheRevitKid Жыл бұрын

Cheers!!

@Ar.Inamurrahman Жыл бұрын

cool

Жыл бұрын

cool stuff @balkanarchitect !

@brennangraves6458 Жыл бұрын

20:00 - COOL!

@TheRevitKid Жыл бұрын

Agreed!!

@MrArty-ns4lm 10 ай бұрын

In India we use the roof , that satisfies the cutoff option on roof in rivit😊

@ghassanissa6294 11 ай бұрын

👍👍👍

@TheRevitKid 11 ай бұрын

Cheers!!

@ghassanissa6294 11 ай бұрын

👍👍👍👍

@BenjaminStones-bq2hz Жыл бұрын

My head is going in bubbles right now

@TheRevitKid 11 ай бұрын

haha 😂

@stevecooper3010 Жыл бұрын

Got a question. If anybody can answer it, hopefully. Why do the roof lines in the plan view not connect? I appreciate the 3 d model shows the hips and valleys connecting, but as we are creating drawings to build from, at what point do the roof lines connect in plan view TIA

@ramiroalvarez9968 11 ай бұрын

For my next trick😂

@TheRevitKid 11 ай бұрын

Hehe. :)

@yaven8338 3 ай бұрын

I think the cutoff level would be helpful if the roof stops at a certain point and then continues at a higher point, think something like Japanese roofs. Does such a use make sense, or is it still just easier to trace out the outline of the roof?

@fazil3153 16 күн бұрын

Highfi 🎉🎉

@studioEARL Жыл бұрын

related question: is there any way to square the top of a single sloped roof? without creating a void that is hidden

@itatabisine6250 9 ай бұрын

Hi all. In 49th min, Milos is talking about joining two roofs together, using roof join tool. That is great when both roofs are on the same plane, but if one roof is lower than the other one, that command is no longer working! I had to join two roofs manually by extending one roof into the other, joining them to see where the intersecting plane lines are going to be, drawing reference planes over them, unjoining the roofs and then modifying the roof edges of one of the roofs (or both if you want to create a dormer opening. If there is any other way of solving this problem, please do let me know. Cheers ;)

@joescugoza5486 8 ай бұрын

How would it work if you wanted to have a roof with an overhang, but wanted a flat bottom for say the patio area, so that the walls didn't go all the way up the roof height. Would you just extend the ceiling out to that area? or would you create a second floor for that area? I hope that makes sense.

@TheRevitKid 8 ай бұрын

I would create a second ceiling for under the patio … just like you would build it! Model it like you build it is always the best approach!

@mikanari9467 Жыл бұрын

Hello, at 46:40 instead of creating a roof, it is possible to use the same tool as at 49:18, it's much easier! EDIT : I'm talking about the "joint roof" tool, it also works with walls

@TheRevitKid Жыл бұрын

Not sure what you mean? I don’t think the dormer too would have don’t what the roof by extrusion did for that overhang…

@studioEARL Жыл бұрын

I believe your talking about the join roof tool instead of the roof by extrusion? if so join roof only works to join two roofs... I believe

@mikanari9467 Жыл бұрын

@@studioEARL Exactly, and NOT !! it's possible with a wall ! i use it everydays :)

@mikanari9467 Жыл бұрын

@@TheRevitKid Sorry my English is bad. I meant that it is not necessary to create a second roof for the part that goes against the wall, with the "Joint roof" tool; you can extend the roof to the wall, as you did for the skylight, to the roof. This tool also works with walls! I can't put an image in commentary or video .. too bad.

@mikanari9467 Жыл бұрын

@@studioEARL look the tooltip, it's written :)

@valeriepierre7297 Жыл бұрын

Modify sub elements is only available for truly flat roofs. What if the flat roof was sloping front to back (ex 1/4: 12) how would you go about creating the saddles? Thanks

@TheRevitKid Жыл бұрын

use modify sub elements to make the initial slope, too.

@valeriepierre7297 Жыл бұрын

@@TheRevitKid Thanks for replying. Once you've used modify sub-elements to do one thing to the roof (in this case slope it) if I then wanted to create a saddle affecting only the insulation layer, The variable in the roof properties is no longer available to do this (test it out).

@zeldaah Жыл бұрын

Re: Cutoff level - I have read you're supposed to be able to use this feature if your roof thickness isn't the same throughout -- for example at rafter tails that get sistered onto TJIs just where they project over the top plate. I cannot tell you exactly how to do this because I never got it to work satisfactorily. Maybe you are clever and can figure it out!

@TheRevitKid Жыл бұрын

Haha cheers! That could be a possibility for sure ….

@errafiqahmad 4 ай бұрын

Last roof has one problem technically in one out of six elements of roof

@luisangel-bl5pm Жыл бұрын

Hi from Calexico Ca. how can i get a roof over a bay window

@TheRevitKid Жыл бұрын

Just model the footprint and add slopes on all the sides you want sloped….

@rajlakhan3375 2 ай бұрын

hi do you provide tutor for this software

@rkurt7492 Жыл бұрын

Please link de do

@darwinthompson7864 Жыл бұрын

for me specifically this video was not help-full at all when it came to making a gable roof

@TheRevitKid Жыл бұрын

So sorry to hear that... I thought it was very helpful and I have been using Revit for 18 years. :)

@darwinthompson7864 Жыл бұрын

@@TheRevitKid don’t sweat it I should’ve reiterated “it wasn’t helpful (at the time).” I just figured how to make it literally about 10min before you responded