"Try your best and caulk the rest" is a joiners favourite phrase! Nice job, rooms look very homely 👍🏼

"loads of experience filling holes" said with a snigger. Nice Keith; very good follow-up to last video's poor turn of phrase.

What a great finish! I'm always saying "... but that's what decorators caulk is for" on jobs around the house too. I'm pleased you showed the costs because this sort of project is not expensive and it is the sort of thing people can have a go and achieve good results.

Great stuff as ever Keith. What I think I admire most about your videos is your brutal honesty, even when something doesn't go quite how you'd like it to. With a little creative editing you could easily hide them, but you don't, you talk candidly about what went wrong and how maybe you'd do it differently if a similar task presented itself again. It is refreshingly honest and I think it's great 😀👍

The rooms are looking great, Keith, you and Rhia must be really happy. Not to mention Dylan, who now has another bedroom.

looks great Keith 👍

If you and the lady are happy with the job you did, that is all that matters. Thank you for the update! :)

Great job and very nice finish. I did the same, building a wall to make 2 rooms from a bowling alley type room, and straight on top of the carpet as it was professionally laid and stretched tightly, which means I would have had to get it relaid if I cut it, looks great now and you’d never know.

Great finish to all your work in the bungalow. Having renovated a few houses over the years I've uncovered professional work that some of your commenters would be horrified by but that were always finished off to a high standard - 'that's exactly what fillers are designed for'. Enjoyed your work and narration.

In this video I install architrave, skirting base boards and do all the taping and filling and decoration to complete the renovation works for the two rooms in our bungalow. I also cover the total costs of the project to install a wall and doors, and show final reveal of the two completed rooms. Part 1 Building The Wall: kzfaq.info/get/bejne/sJyofNqi1Z69faM.html Part 2 Hanging The French Doors: kzfaq.info/get/bejne/nNiCoMuovbCpaas.html 0:00 Intro 0:28 Finishing Door Linings 1:18 Taping & Filling 3:55 Sanding & Decorating 4:26 Architraves 6:45 Skirting / Base Boards 9:00 Final Reveal 9:20 Total Project Costs 9:44 What I'd Do Differently This video is supported by Milwaukee, check out their full range here: uk.milwaukeetool.eu/?Social&KZfaq&Rag%20N%20Bone%20Brown%20-Milwaukee%20Range Tools used in this video: M18 Table Saw uk.milwaukeetool.eu/en-gb/m18-fuel-one-key-table-saw/m18-fts210/?Social&KZfaq&Rag%20N%20Bone%20Brown%20-%20table%20saw M18 18g Finish Nailer uk.milwaukeetool.eu/en-gb/m18-fuel-18-gs-finish-nailer/m18-fn18gs/?Social&KZfaq&Rag%20N%20Bone%20Brown%20-%20Finish%20Nailer M12 Drill uk.milwaukeetool.eu/en-gb/m12-fuel-sub-compact-percussion-drill/m12-fpd/?Social&KZfaq&Rag%20N%20Bone%20Brown%20-12v%20fpd M12 Impact Driver uk.milwaukeetool.eu/en-gb/m12-fuel-sub-compact-8243;-hex-impact-driver/m12-fid/?Social&KZfaq&Rag%20N%20Bone%20Brown%20-12v%20fid M18 Jigsaw uk.milwaukeetool.eu/en-gb/m18-fuel-top-handle-jigsaw/m18-fjs/?Social&KZfaq&Rag%20N%20Bone%20Brown%20-%20M18%20Jigsaw

You have done a great job considering you are self taught. Always appreciate the ‘lessons learnt’ at the end. Looking forward to the desk build, I have one of my job list!

Ive been a second fix chippy for the last 20 years and thats been my motto for all ov them. "That's why they invented decorates caulk". HAHA keep up the good work and videos mate👍👍

“I’ve had loads of experience filling holes”...giggidy

At the end of the day Keith,its your home you complete the work how it suits you.There will always be some pro's picking fault but you are doing fine.The bungalow is really coming along.Easy fill is a great product,i use it for filling work projects and for home.

House is looking fantastic mate!

Nice job. Well done, mate

Wow 😮 you are extremely gifted🥳🎊🤩 done an amazing job 😉🎊😎stay safe 🙏🏽

The outcome is very nice . I like that the two rooms have different colour and the door is like existing there for ever . The base boards are looking very nice although it seemed to me very difficult to fix . I think a light colour desk would be perfect there . Great job as always and i really enjoy the video . !!!!!!!!!

Looks great Keith, beautiful final result, and very fitting with the rest of the house, love it. Cheers from Aus!!!!

The remodel looks quite nice, Keith. You did a good job. I am looking forward to watching the desk build that you have promised Rhia. Thanks for these past two videos.

Nice job mate. Doesn't matter how others tell you how to do it.....what ever works for you!

Wow great job. This is about the level of a well oiled handyman level such as me. Good detail in your video. Detail is what we need more.

I thoroughly enjoyed this video. I am again impressed with your workmanship. Thank you for doing this video. I learned what I need to do when I finish off a wall in my Laundry/Work Room.

Looks great 👍🏻

Great video!

All in all, you did a spectacular job mate. Nothing I could see that was noticeable to the naked eye. Outstanding job buddy and a great video.

The room is looking good Keith! Thanks for sharing the video with us!💖👌👍😎JP

Looks good 🇺🇸 from Winchester VA

When we moved into our current house 10 years ago, we discovered the previous owners had added a wall over the top of the existing carpet as well. We've since replaced the carpet on one side, and tiled on the other. So the only place left in the house with the original carpet is underneath that wall! We did have to cut the carpet along the wall before we could re-floor, which was a bit of a pain, but not a massive problem. The thing they didn't do in building their wall (which I think you did) is fasten it to the floor or ceiling. So when we went to nail on new skirting after replacing the floor, the wall is very springy and very hard to (hand) nail in the middle. Im sure a nail gun would get the job done, but we didn't have one at the time.

Very helpful videos, cheers!

A good job done

Nice job Keith. As always, really appreciate the cost breakdown and "things I done wrong" breakdown!

Some good tips in there for adding trim - measuring does not always give the best results, sometimes holding the trim in place and marking works the best.

WELL I reckon Keith you did a cracking job Mate, have a nice day and you Guy's Stay Safe !!!.

Great work, Keith.

Love it, Its all great work.

The end result looks so nice. Good job ^^ and thanks for sharing

Wow those rooms look stunning Keith very tidy job, I can’t help thinking with the hoodie you look like the worlds most conscientious burglar 😁

End result looks great Keith, enjoyed this series of videos, nice to mix it up a little with the video content

In this case the ends did justify the means. Nice clean looking job.

Small tip for the future, rather than using a compass to mark your scribes on the skirting, if you cut a 45 on the end it leaves you a perfect outline to cut. If it’s primed mdf it’s even better. 👍

That was another great video thanks for posting 👍

You are really gonna wish you cut the carpet when it comes time to replace it! Great vids 👍🏻

Looks great Keith and like the say this isn't your normal type of work, but still looks spot on so that's all that matters. 😊

Thanks, Keith. You can't have the handle central on both sides as they are different sizes. No worries.

Great stuff Keith. Wish I had more experience filling holes.

Works for me.

I seen the handles Keith , but too much of a gentleman to mention 😬😂 you did great . Ive been a carpenter for 20years . . Great content as always

Looking great mate and the Maine thing is u did it all ur self and learnt loads I bet. the carpet will be fine I moved lost of stud wall we’re the previous person built the wall on the carpet and u haven’t got to try to Mack good the flooring so much better if there nothing wrong with the flooring as u can open the room back up as one and no one we’ll ever no lol 😂 good job can’t wait for the next video and what ur making👍

Nice outcome Keith, just one thing I dislike, the bolt holding the slave door could have been done using a hidden bolt where the doors meet.

Good video, I think you need a coping saw.

Loved this series Keith!

Anyone notice that at 3.54 it looks like Keith is just going down the wall next to the caulk line with his finger, I saw it the other day and had to watch it again.

Room is looking good,if you are running short of paint instead of brushing use a rad roller a little goes a long way.

Hi Keith can you point me in the right direction where you learned how to use Sketch up for all your designs and cut list plans Thanks Wayne

Looks really good.

Cracking job.. And from being a yts painter... Your cutting in is spot on

thanks for the lessons learned!

looking really great, my wife likes the colour on the wall, what is the name of the colour you used please?. Keep up the good work look forward for more videos.

if you want to paint mdf put normal sanding sealer on it first that stuff is very cheap i use it on all of my builds to seal up my wood projects, seal it up, then the paint wont soak into it anymore and it will last longer. mdf also molds very easy. everything you make or build needs to be sealed. it makes a huge difference.

Very nice result I'd say.

Put a decorative vase with some plants( fake or real) in the corner where the fill plug on the base board is

I am so envious of you, I don't know how you do the work so fast. I'm not sure what you're doing to make it so fast or what I do that makes it so slow.

Looks good😍

Get a dual monitor arm for the new desk . They save so much space

Looking good... great video work Keith... Shit handyman work... 🤣🤣🤣

Thanks so much for this! What filler did you use for the wood? Also, what was the paintable adhesive you used for attaching the architrave? Thanks again!

Great job Keith. What colour paint did you use on the dining room walls ?

Keith another great job and well explained i like channels like yours because you show your errors . did you just paint the plaster board if so did you just primer and paint cheers Mark

Different from the normal videos but Very interesting👍🏼 thank you. When did u get all of the milwakee tools??

Is that the right way to say "caulk"? I never been confident the way I say it lol Hope you're enjoying your Milwaukee, all the same gear I got, nice project, looks good.

Nice job Keith, love the 2 different colour schemes , very classy. As well as This being able to claim tax for using home office for work, can you claim build costs against tax or at least her employer contribute ?

Hi Keith, did you use the 20min or 60min filler? Any advice on which one is best for internal renovations.

Ok. Did anyone ask already? How strong is particle board for securing a security latch?

Keith, what extractor system did you install in the attic? Is that to prevent damp?

Where did all the new red W tools come from, did you win the lotto?

What's the purpose of the latch? Sorry if I missed the explanation already.

Nice hat ... ;-)

Great work mate...what dose Dylan think of his new room ?

Aagh....invest in a dust sheet Keith....really scary watching you apply adhesive & paint over your carpet...slide some cardboard under the skirting when painting !!!..........my other half would kill me if i did that....turned out nice in the end though !

The only appropriate place for carpet is a skip. Carpet cannot be sanitized properly, it just becomes an archeological record of all the dust and debris in a house.

Do your best, caulk the rest! 👍

It sounds well weird how your pronouncing caulked, is it not pronounced corked. This isn't meant as a criticism btw.nice work man.

Great video. However not quite enough Dylan.

What amp battery's do u use on Yr jigsaw and other ig 18v tools

.😊👍.

Nice work and great video, Keith. I know the job is finished now, but thinking of you cutting in the wall paint at the ceiling reminded me of the triangular brush that was part of the kit that came with a Dulux non drip power painting system. The system worked beautifully the first couple of times, but after that it failed to perform well so was junked. The triangular brush, though, proved an excellent tool, which my professional painter friend now uses exclusively after I recommended it to him. If you are going to do more room decoration, take a look at www.amazon.co.uk/Dulux-Perfect-Edges-Triangle-Brush/dp/B002NQ08RE?th=1 and the comments.

One coat .I am a decorator and would never use one coat.🤣

🍻🍺