Rotary Broaching Eccentric Cams || INHERITANCE MACHINING

Рет қаралды 482,315

Күн бұрын

Welcome back to the machine shop for the dramatic conclusion to the rotary table chuck adapter build! Two videos ago I went about the process of reverse engineering the D1-5 cam mechanism of my metal lathe and developed an adapter design using the drafting table. Then in the last video I underwent the emotional rollercoaster that was machining the main body. So in this video I’ll be finishing up the remaining bits and bobs to make the mechanism work. Along the way I’ll be trying a few new techniques including scallop milling with the boring head. Turning an eccentric cam profile with the 4 jaw chuck. And one of the biggest side projects to date, making my own rotary broach to machine square holes!
#inheritancemachining #machineshop #hobbymachininst
Patreon (Early Access + Ad Free + Drawings) - / inheritancemachining
Drawings Store - inheritancemachining.com/?pro...
Instagram - / inheritancemachining
Website - inheritancemachining.com/
Amazon Storefront (affiliate links): www.amazon.com/shop/inheritan...
And a special thanks to my "Micrometer" level patrons!
Tom D., Wesley T., Karam A., Patrick K., Jason A., Max, Sandra C., Jason R., Andrew O., Laz A., Philip Z., Michael B., Joe W., ???, Kevers., Lollimewire, Toon A., James, Noah, Michael G., Brennan M., Lachlan L., Jim A., Benjamin D., Grant F., Brendan W., Caleb T., Stephen M., Samuel G., Ralph M., Brenton, Ethan B., Chris W., Esti-Mari D., Matthew K., Terence K., Charles P., Michael T., Ben M., Jim H.
TIMESTAMPS
0:00 Intro
1:33 Necessary Preparations
3:14 Sacrifice
4:20 The Boring End
7:02 The Exciting End
9:23 Doing the Thing
11:20 Eccentricity
13:22 Scallops, Detents and Grooves
14:51 Moment of Truth
15:37 When Catastrophe Strikes
16:46 You need a Plan B
17:33 Screws & (T)nuts
19:00 Fit and Finish
FAQ
Drafting Equipment (affiliate links): amzn.to/3P0HvMe
A/V Equipment (affiliate links): amzn.to/3Pi45jB
Editing: Final Cut Pro X
Intro Song: Way Back Way Back When (Instrumental Version) - Gamma Skies
www.epidemicsound.com/track/S...\
• Rotary Broaching Eccen...
© 2022 Inheritance Machining, LLC. All Rights Reserved.

Пікірлер: 626

@InheritanceMachining Жыл бұрын

Once again my wife, Paige, deserves all the credit for setting up the highly requested merch store. She did an amazing job on all the designs! See the description to check them out. As for the next project, it will be one I've alluded to almost from the beginning so I'm excited for a much needed improvement. So look out for that at 10am EST on Friday Sept 30th. And as always, thanks for the support!

@OB1canblowme Жыл бұрын

Next side project: Eccentric V-block chuck 😜

@tigererickson8375 Жыл бұрын

If I support you on Patreon I get the video on the 29th?

@InheritanceMachining Жыл бұрын

@@tigererickson8375 Yup, that's right!

@InheritanceMachining Жыл бұрын

@Gabriel Marshall I'm a lucky man!

@InheritanceMachining Жыл бұрын

@@OB1canblowme I'm already working out how to make my own 😂

@xicofonseca6023 Жыл бұрын

for such a a recent channel i feel like you really captured the formula of what a great video is. Beautiful shots and excellent narration.. Congratulations and keep up!

@besenyeim Жыл бұрын

With a sprinkle of jokes and pinch of recurring themes.

@tigererickson8375 Жыл бұрын

Formula's here. The execution however, leaves nothing to be desired except a larger library.

@InheritanceMachining Жыл бұрын

Thank you very much!

@eric.turner1853 Жыл бұрын

Nothing else has so quickly become a favorite channel. It’s amazing how good these are!

@mpyoung33 Жыл бұрын

The same charm as TOT

@matthewpeterson3329 Жыл бұрын

This channel is great! I've been missing TOT, and this one scratches that itch. In fact, both creators have similar sensibilities regarding a focus on the work rather than their mug always being in frame, as well as using narration to explain the project. It keeps it all concise and on point. Personally, I would love to see a collaboration, as these two guys could be hilarious together with their subtle humor.

@brianmihlfeith7135 Жыл бұрын

Yeah, I love this channel, but (and no offense), TOT is the GOAT at dad jokes.

@ShinnahWilde Жыл бұрын

God bless "this old tony"! Life must be getting in the way of more of his content. I hope he is doing well.

@kyleadominguez Жыл бұрын

We all miss TOT. Thanks for stepping up to the plate

@warbirdwf Жыл бұрын

Thank you for your comment about other KZfaq creators having their mug in frame CONSTANTLY. It's so annoying when you see this on other channels. For those of us who watch machining channels, we all know the one guy who is the worst at that. It's like he has to have his round mug in every shot while talking incessantly. Ugh....

@MachiningandMicrowaves Жыл бұрын

I took the decision to be a "faceless" channel mostly because of liking Tony and his terrible jokes and film-star hands. I can understand why some machining creators just talk to the camera. It's SO much quicker than having to create interesting and engaging B-roll content, animations and then overdub and synchronise the narration. Keep it up Brandon, this is lovely gentle entertainment. Nice merch too.

@matthasaname Жыл бұрын

The broken broach was so painful. Then the subsequent 5min operation on the mill to finish that operation of the 5 cams was . . . well, hilarious. Well done again sir. I love this stuff.

@InheritanceMachining Жыл бұрын

I could have been worse I suppose 😁 Thank you

@Avram42 Жыл бұрын

@@InheritanceMachining to be honest I was interested in why you needed the corners to be so sharp for the function in the first place; I've regularly 'designed' square drive (or hex for that matter) parts intended to not require broaching so they can be milled instead, especially when we're talking such a short run of parts (or if non-standard sizes).

@InheritanceMachining Жыл бұрын

@@Avram42 It was mostly a bad assumption on my part. I assumed I needed a fairly sharp corner for the wrench to fit and didn't consider that the corners would be rounded. I was also excited about (and stuck on) the idea of making the broach. You live and you learn lol

@TheDesertRat31 10 ай бұрын

@@InheritanceMachiningI'm not a machinist (but I dream of having a mill and lathe... and WTH, all the rest of that stuff to tinker with, because: why not).... but say you needed to have those corners sharp. Could you perform that milling operation (to hog out most of the material) and use the broach to cut the corners? Would that process lessen the forces on the cutting tool?

@link7417 9 ай бұрын

@@TheDesertRat31 that is why you are supposed to drill 10% over sized like he did after trying flat to flat size drill and it didn't work, you can drill out more to lessen the forces involved though but that would decrease the engagement surfaces, the problem whit milling away material to make a none round hole would be ensuring the broach engage correctly which is not impossible though finicky I assume, I may be wrong about this though,

@weeeeelaaaaaah Жыл бұрын

The best part of finding a great new KZfaq channel is the excitement of the first video released after you binge the archive. The worst part is the sadness when that video ends and you have to wait for the next one. 😭

@c4t4l4n4 Жыл бұрын

Yeah, but that is what makes life interesting. Combine it with a few other good channels and you may have a steady flow of excitement.

@mattbryan7589 Жыл бұрын

Its become one whwre i constantly go back and rewatch the videos

@ShinnahWilde Жыл бұрын

I consider this channel to be on par with "This Old Tony", "Sampson Boat Co", "Mike Patey", "Fireball Tool", and "Stuff Made Here". I love that you all take the time to share your work with us!

@Skironxd Жыл бұрын

Thanks for the suggestions, only knew of this old tony and fireball tool.

@enetheru Жыл бұрын

you would probably enjoy CEE too then, Cutting Edge Engineering.

@InheritanceMachining Жыл бұрын

Those are some big names (and some of my favorites). Thank you so much!

@cwalker7 Жыл бұрын

@@enetheru ive started using "dramas" in place of problems lately. Took me a while to figure out were I picked that up from. Clued in the other day it was from that dam aussie

@cypherfunc Жыл бұрын

If you aren't already familiar, check out Blondihacks too!

@bruceeickholdt9293 12 күн бұрын

I watch one of your videos every evening. Thank you for showing and fixing imperfections

@BotF3eder Жыл бұрын

One thing i really like about you is that you show your mistakes and always try to learn something new along the way.

@OldIronMachineWorks Жыл бұрын

Branden, there’s a reason why your channel is growing so fast. You make great videos!

@InheritanceMachining Жыл бұрын

Thank you so much!!

@aethertech Жыл бұрын

Side-Projects are love. Side-Projects are life.

@InheritanceMachining Жыл бұрын

The complicated things are what make it exciting! Broken tools included. Though they sting for a bit 😉

@VincenzOmaha Жыл бұрын

Friday = Inheritance Machining and Saturday = Blondie Hacks. Always a good start to the weekend!

@Abrikosmanden Жыл бұрын

As if the project, the side projects, the narration and the bloopers weren't enough, this video had FRIGGIN' FINGER GUNS in it!!!!!!!!!! Thanks for this one - along with the latest video from Torbjörn Åhman, this made for a wonderful, calm evening.

@InheritanceMachining Жыл бұрын

but man... they felt so dorky! 😂 But seriously, thank you so much!

@That_Dyna_Guy Жыл бұрын

Your channel has quickly become one of my favorites. Thanks for sharing with us

@InheritanceMachining Жыл бұрын

I love to hear that. Thank you!

@DolezalPetr Жыл бұрын

I love your side project counter in every video

@markcallahan8082 Жыл бұрын

It really is a beautiful thing that you are carrying on your grandfather's legacy through this machine shop. Most people would have posted the lot on craigslist. Thank you for taking us along with you on the journey I always light up when I see a new upload! keep up the good work sir!

@InheritanceMachining Жыл бұрын

I wasn't about to let that happen. I couldn't image giving up my grandfathers tools!! Glad you are enjoying the channel! Thanks for the support

@laignechfaelad Жыл бұрын

Perfect timing. Managed to get the kids down for their daily nap. Now for some relaxing time with IM. I love the channel, especially watching the board work. This has fast become one of my top 5 channels

@InheritanceMachining Жыл бұрын

Woo hoo! Thank you!

@LNM0000 Жыл бұрын

".. added a whole other level..." Mate, you've done that alright. Superb stuff.

@dudelookatree Жыл бұрын

I'm really proud of you. Learning from experts is great but watching someone grow themselves is cool too

@InheritanceMachining Жыл бұрын

I appreciate that! I try pretty hard not to come off as an expert as I'm definitely not. I just want to share the story of learning the hobby

@rixiv7868 Жыл бұрын

@@InheritanceMachining You’re the best manual machinist I’ve seen on KZfaq. And it’s obvious you’re an expert in engineering and more than capable of creating the parts you design with very high quality and precision. Love the videos man.

@joelrunyan1608 Жыл бұрын

..... the difference Between making tools... and using tools...🤌 bravo 👏 👏 👏

@yeagerxp Жыл бұрын

Well done 👍👍👍Thank you for sharing. Take care of yourself, be safe, and healthy 🇨🇦

@shirazmehta Жыл бұрын

I am a woodworker and absolutely enjoy your videos. I had subscribed to your channel and binged watched your videos. Good luck in your endeavours.

@InheritanceMachining Жыл бұрын

Thank you!

@heathmurphy3735 Жыл бұрын

That is a work of art mate!

@dippondots3108 Жыл бұрын

just binged through all your videos and absolutely love them! Keep up the great work!

@InheritanceMachining Жыл бұрын

You must have had an early morning 😉 Thank you!

@bobert6754 Жыл бұрын

1 IM side project = 3 part ThisOldTony mini-series. I love it.

@InheritanceMachining Жыл бұрын

I didn't even know what a rotary broach was before ToT's series!

@jacobwatts1824 Жыл бұрын

first youtuber merch i’ve bought and i couldn’t be happier supporting such a great youtuber. brilliant project and video, IM- keep it up

@InheritanceMachining Жыл бұрын

I love to hear that! Thank you so much for the support!

@lumotroph Жыл бұрын

Very well done. Also fast becoming a favourite channel. Looking forward to seeing that heat treatment process!

@kshysztof9649 Жыл бұрын

Lovely ! One of the better channels I've found recently :)

@InheritanceMachining Жыл бұрын

Thank you 😁

@HansKnives Жыл бұрын

I watched the video a long time ago. Didn't know what it was though, until I was looking for a way to quickly change the chuck for my small lathe, I didn't know it turned out you had made one. After watching it many times, I finally understood how it works. It was so much fun. Thank you for the video.

@InheritanceMachining Жыл бұрын

Oh that's awesome haha Thanks!

@_FJB_ 10 ай бұрын

This is deffinately a very well put together channel. Just found it a couple days ago.

@mchiodox69 Жыл бұрын

The politically correct term for "bad decision" is "alternative modeling, simulation and analysis." Love the channel and I am always learning. Many thanks

@InheritanceMachining Жыл бұрын

😂 love it! Thanks!

@rollinrat4850 Жыл бұрын

Geez, that reminds me of my time as a research machinist/contractor at NASA. Some of my 'customers', researchers and civil servants had all these big words and acronyms only they understood to explain their incompetence and justify their existence.

@WeGoWalk 8 ай бұрын

I am continually amazed at the incredible detail in the process you follow. Just doing one function out of sequence can ruin an entire project or prevent moving forward. Your expertise is greatly appreciated by us all.

@tomwagemans1872 Жыл бұрын

As always thanks for making the episode. I see you in the next one!

@InheritanceMachining Жыл бұрын

My pleasure!

@CraigsWorkshop Жыл бұрын

The end result is fantastic, and the journey and the video making was just as fantastic. I really hope you don't get bored of making these any time soon. This is my favourite channel right now, ToT and Clickspring have slipped a notch.

@InheritanceMachining Жыл бұрын

😮 Not ToT!! haha I really appreciate that man! Thanks for following along

@MachiningandMicrowaves Жыл бұрын

I second that message, this is so nicely filmed and great voiceover. I'll be "borrowing" one or two of your editing and filming techniques!

@jebowlin3879 Жыл бұрын

Whats that old saying, "trying new things is how we learn new techniques", lets also not forget, "Failure is the best teacher"

@InheritanceMachining Жыл бұрын

I seem to embody these phrases

@jimmyfleebot Жыл бұрын

What a great start to my weekend! Thanks very much for your hard work, we're spoilt by your production quality.

@InheritanceMachining Жыл бұрын

Now the pressure is on to maintain it! 😉Thanks!

@TheOnyxMage Жыл бұрын

Discovered your channel last week binged every video and jumped in excitement when i saw this upload. Love your content, the pacing, the shots, the vibes. Hope you have fun making the videos!

@InheritanceMachining Жыл бұрын

It's a lot of work but definitely still fun for me. Honestly the videos are probably helping me get out of my comfort zone. I appreciate the support!

@nicholasmcconnell7853 Жыл бұрын

Love your videos. No frills, all the important stuff and just some wit to it. Good job.

@fullmetalpenguin Жыл бұрын

Kudos for having the courage to share that Dremel+hose clamp rig. If it’s stupid, but it works…it’s not stupid.

@jimkreegerjr.8813 Жыл бұрын

I love your format. No annoying music in the background, and your bumper music fits your style and personality perfectly.

@InheritanceMachining Жыл бұрын

Why thank you 😁

@SchysCraftCo. Жыл бұрын

Always absolutely relaxing and nice watching your videos. Keep up the great craftsmanship and hard work my friend. Keep making. God bless.

@InheritanceMachining Жыл бұрын

Thank you sir!

@ShinnahWilde Жыл бұрын

I just discovered this channel two days ago and have watched it all!

@InheritanceMachining Жыл бұрын

Woohoo! Welcome!

@lolcec81 Жыл бұрын

Увлекательная и интересная работа по металлической обработке металла.

@ezmac8185 Жыл бұрын

This channel helps me relax

@JayRussellDuramax Жыл бұрын

Call me simple, but a well formed detent is one of the most satisfying things to incorporate into a design. They're just awesome, and they're always so functional! Great work, Brandon! I'm looking forward to seeing what you do next!

@InheritanceMachining Жыл бұрын

I completely agree! The cams in my lathe nose don't have the detent and now I can't stand it 😆Thanks as always, Jay!

@JayRussellDuramax Жыл бұрын

@@InheritanceMachining Haha! Side project?

@tced2858 Жыл бұрын

Beautiful work...!

@Shimmolphinny 9 ай бұрын

@18:14 Soooooo satisfying! Great work!

@TheMegamaster44 Жыл бұрын

Every time i see a rotary broach in action i am amazed with what they do

@reiniertl Жыл бұрын

Outstanding as usual.

@killerguppy2988 Жыл бұрын

The Number One thing I use all my tools for.... is to make more tools. That thing looks beautiful, and the detents are a great addition that I wish more chucks and adapters had.

@InheritanceMachining Жыл бұрын

That's exactly right. Thanks!

@DrakeKillah Жыл бұрын

Coming home from work, grabbing some food and a beer, then sitting down with a couple of your vids, has become my zen. It's so enjoyable, it's downright therapeutic. I love the attention to detail, and your adherence to tight tolerances; even for parts where it doesn't matter. With a few anomalies, when you can talk yourself out of it. I can see myself so much in that philosophy - I had to quit working construction because of it; I'm too much of a stickler for precision for that line of work. Your calm narration combined with your subtle humour is the icing on the cake, built on great craftmanship, videography and editing work. I hope you keep making videos for years to come, I intend to watch all of it. Thank you so much for making great content.

@InheritanceMachining Жыл бұрын

I really appreciate your kind words, Drake. I plan to continue this as long as possible. Thank you so much!

@SupraTompan Жыл бұрын

Ah. I have been watching this process with my morning coffee, enjoyed every minute 👌 True craftmanship with all its modest complications.

@InheritanceMachining Жыл бұрын

Thank you!

@supremebeefmaster Жыл бұрын

Distinguished gentlemen of the TOT and AvE channels, I welcome you.

@michaelfmarcos Жыл бұрын

That "or... not?" moment when using your backup plan. My jam is woodworking but I felt that to my core.

@ssmallishplague 6 ай бұрын

Funny this got recommended since I already watched it but also watched today’s video. Redemption!

@InheritanceMachining 6 ай бұрын

Ha! Redemption indeed!

@ssmallishplague 6 ай бұрын

@@InheritanceMachining 😁

@bigrednick100 Жыл бұрын

Very well done.

@koenhendrickx1142 Жыл бұрын

Very nice videos on the channel. Same as Blacktail studios. Sped up videos, comments to guide us through, showing the mistakes and issues along the way... I like it.

@Chris-kk8xg Жыл бұрын

I really enjoy all your machining adventures, keep em coming I can't get enough. Also your narration is top notch.

@InheritanceMachining Жыл бұрын

Thank you so much!

@mikebeacom4883 Жыл бұрын

That’s a really handsome tool, and it looks so simple when you’re done…

@InheritanceMachining Жыл бұрын

Thanks! Yeah there was a lot more to it thank I initially expected.

@strykerentllc Жыл бұрын

The shop made dog point cap screws was a nice touch. Cheers!

@InheritanceMachining Жыл бұрын

Thanks!

@deanharris7149 Жыл бұрын

Probably close to a perfect channel for 85% of the guys and gals watching this theme on the tube. Show your mistakes so you can show your growth, don’t quit until it’s done to a high standard. I’d wager your Grandpa is looking down proud of you.

@InheritanceMachining Жыл бұрын

Thank you so much!

@adamstripp39 Жыл бұрын

Impressive! That was a lot of work

@dennisdelpiero7615 Жыл бұрын

Love your video style and the way you work with calm and precision. I also like how you emphasize that the main project carries many side projects with it. Thanks for sharing you passion

@InheritanceMachining Жыл бұрын

Thank you! I'm happy to share my journey

@thegoodlookinorange1986 Жыл бұрын

When your broach broke, I threw my head back and did the Platoon movie scream and said “Noooooooo.” I feel your pain of broken tools in parts. I’ve had many as well from taps to micro-mills. Good thing your in your own shop and have a box of shame. Lol. My father-in-law had a chain you would affix the pooched part to and wear for the day. Lol. Love your content and new merch.

@InheritanceMachining Жыл бұрын

That's one way to never forget the mistake haha Thanks!

@iWonchan Жыл бұрын

absolutely love the specialty dremel holder. This Old Tony would definitely approve.

@outdoormountainman Жыл бұрын

Simply Awesome! We absolutely love your channel and now I have so many new projects to try and machine because of this channel, I’m definitely not complaining 😁

@HM-Projects Жыл бұрын

Great end result, but it's the journey that counts. So many learning experiences. Well done.

@InheritanceMachining Жыл бұрын

Exactly. Thank you!

@J3assbox Жыл бұрын

Its always a pleasuere when you encounter a quality channel like like.

@dermozart80 Жыл бұрын

Your narration, shooting and editing is getting even better. You're absolutely awesome. Thank you for sharing all those wonderful moments with us!

@InheritanceMachining Жыл бұрын

Getting a little better with each video 😁 Thank you so much!

@BrassLock Жыл бұрын

My Mum had a rotary brooch. It was a family heirloom passed down from her great Grandmother I'm told. She used to wear it to all the fancy dinners 🍽 and dances 💃 back in the day.

@InheritanceMachining Жыл бұрын

😂

@m-tech1816 Жыл бұрын

the best projects are about repairing something that broke while making something, that could eventually find a usecase in a different project. But mainly its working for the workshop. Amazing

@josephlovell6951 Жыл бұрын

As always great job buddy. Good to see the wife's having fun in the shop with you. God bless

@InheritanceMachining Жыл бұрын

She stops down every once in a while 😁 Thanks!

@amarok5620 Жыл бұрын

Man, I work (basically as an apprentice) at a internal machining shop in a mid-sized stainless steel industry and everything this guy does as a hooby just looks a lot more professional than what I see there. I'm just amazed.

@mpyoung33 Жыл бұрын

I’d like to see an AMA with Brandon and hear what he has a background in. Definitely not a novice machinist.

@nectouxpierre4634 Жыл бұрын

Well done! It was a very complex part to complete, I really enjoyed

@InheritanceMachining Жыл бұрын

Thanks man! I've seen your work so that means a lot coming from you

@andybtec Жыл бұрын

Excellent work and a very handy addition your workshop.

@Tunkkis 9 ай бұрын

Hell yeah, man, that rocks.

@taylorbaratka6883 Жыл бұрын

Can't wait to rock one of these snazzy tshirts to my first machinist class on Monday 😎

@ClarkSchaefer Жыл бұрын

Brilliant stuff as always. And the shirt has the drawing on the back, lovely!

@mawirecon Жыл бұрын

I just got into 3D printing and am diving into the CNC world. Zero experience with any of it, let alone any machining. I have no clue what's going on in these videos but I absolutely love this channel. Cannot stop watching, and now I wish I could go back in time and study machining. These are great and extremely informative, even for someone who struggles to cut a straight line in wood. I thoroughly appreciate the "side project" counter, and that you include the goof ups.

@InheritanceMachining Жыл бұрын

Glad you like the videos! Thank you so much

@ankitmr47 Жыл бұрын

i have small fabrication shop and I love to watch maching process it's very setifing to watch, and your videos are awsome , waiting to see next video

@Myrulv Жыл бұрын

I love your attitude and approach to work, problems and solutions. 🤗

@InheritanceMachining Жыл бұрын

thank you! 😁

@kentuckytrapper780 Жыл бұрын

Excellent job man, great video, keep'um coming..

@williamwalters3796 Жыл бұрын

Ouch, so much for rotary broaching 😢

@rogerbehrens4879 Жыл бұрын

Excellent workmanship. Your attention to detail is first class.

@InheritanceMachining Жыл бұрын

Much appreciated!

@Disneymkvii Жыл бұрын

I'm just here for the side projects!

@oldturbojettest9724 6 ай бұрын

Nice work as always. I really enjoy your videos. Thanks.

@TrPrecisionMachining Жыл бұрын

very good job..thanks for your time

@liamnelson49 8 ай бұрын

When i saw the material being pushed into the collet i got flashbacks when i was nearly killed at work. Fun times

@FullSendPrecision Жыл бұрын

This was an awesome project. I'm not sure you captured just how complex and critical every measurement in a camlock design is. You made it look easy. I wish I had the patience to make one myself!

@mudnducs 6 ай бұрын

Very cool. Beautiful output.

@rogerleonard2880 Жыл бұрын

I love Your videos!! Incredible quality and narration. I love seeing all the upgrades you made to Your machines in previous videos!

@InheritanceMachining Жыл бұрын

thank you!

@nefariousyawn Жыл бұрын

11:56, great product introduction. I was literally thinking about how cool that shirt is.

@chrisH-uv5wx Жыл бұрын

Excellent job!

@coplandjason Жыл бұрын

I discovered your channel a few days ago and I've been binge watching your videos, excellent work, I'm really enjoying watching your projects (including all the side projects!)

@InheritanceMachining Жыл бұрын

I'm glad you like it! Welcome!

@joselrodriguez5999 Жыл бұрын

I wonder if the end mill you used to make the tool was hardened all the way. Maybe you should have tried to harden the cutter once shaped. Great post as usual! Cool you have your merch, two t-shirts on their way!

@InheritanceMachining Жыл бұрын

You mentioned that before and it got me thinking. I think you're right about the middle likely not being as hard. Next time I have a spare 2 days I might try again and give hardening a try. Thanks again for the order!

@robinkozma4459 2 ай бұрын

You know what, you are like NileRed, just for machining!

@kmaxon23 Жыл бұрын

I do enjoy the videos! Thank you for taking the time to make this great content! I've been watching ever since rotary SNP mentioned your channel. I usually watch on my TV so I don't normally get to comment, so I thought to take a min to look you up on my computer and say thank you for taking the time to document and produce these videos.

@InheritanceMachining Жыл бұрын

It's been my pleasure! Thanks for taking a moment to leave a comment. I really appreciate it! Also, I'm not familiar with SMPRotary. I'll have to check him out. Do you recall which video he mentioned me in? I'd like to thank him