I just bought the V2 Monotube kit and I’m so excited for them after this
@4WDTrek10 ай бұрын
Awesome! Glad I could help out with the excitement!
@user-xq8gm4oc2i8 ай бұрын
Much needed video. Thanks for the content!
@4WDTrek8 ай бұрын
You are welcome bud!
@BlackHawk2952 жыл бұрын
I'm looking forward to the future build videos! I've had good luck so far with the ZJ 3.5 inch lift despite some negative reviews, glad to hear that they're decent on other rigs too!
@4WDTrek2 жыл бұрын
I am very happy with it. Rough country gets so much crap for being "cheap."
@thomasstevens46222 жыл бұрын
Pretty cool I am getting the x series 4inch rough country installed but good to hear the cheaper lifts work great. Thank you
@4WDTrek2 жыл бұрын
Very nice! Should be a good set up!
@carpoolpartyllc8360 Жыл бұрын
Ty so much for this video
@4WDTrek Жыл бұрын
I'm glad you enjoyed it!
@thumpstar125022 жыл бұрын
I have a upgraded tie rod bar you can have if you want . I upgraded from that and I went even bigger and went to the 1 3/4 rock krawler pro aluminum one to handle the abuse .my other is one is perfect .never really used it .It’s just sitting around if you want it .
@4WDTrek2 жыл бұрын
Unless it's aluminum, it will probably be the same as the one I just got. Haha
@thumpstar125022 жыл бұрын
@@4WDTrek it’s heavy duty and if you know anyone that wants it they can have . or a spare . it’s basically brand new . If I bend or break my aluminum one they will replace for free so no need for it now .
@4WDTrek2 жыл бұрын
@@thumpstar12502 might have to take you up on that actually. I have a buddy who will be upgrading his here in the next month.
@thumpstar125022 жыл бұрын
@@4WDTrek let me know .. hate to throw it away when someone can use it
@4WDTrek2 жыл бұрын
@@thumpstar12502 shoot me a message through fb or Instagram. Same name
@1978coop Жыл бұрын
Great review you did use the track bar bracket and drop pitman arm correct?? Have guys telling me not to use them to leave it stock n get adjustabile track bar ,but I think I’ll just use all of kit for now ,maybe upgraded pieceies in future I’m no hardcore crawler just occasional Weeknd fun ect n by your review should all be solid for now
@4WDTrek Жыл бұрын
I used the track bar bracket yes. But I did not use the dropped pitman arm. I actually did the drag link flip instead. The kit where it flips the drag link to the top side of the steering knuckle instead of the bottom. I didn't have any issues with any of that set up. Used the stock track bar until I swapped to one ton axles this winter.
@darlingcat Жыл бұрын
Thank you
@4WDTrek Жыл бұрын
You are welcome!
@GoneBroke2 жыл бұрын
I have the same Jeep and color. I bought mine with a 3.5 " lift but not sure the brand. The springs are black and the shocks are white with a white stripe along the length. The issue I have are the shocks are not good so looking at Bilstien or Fox. Did you do a gear swap in the axels with lift or kept stock? I feel a little under powered with the stock so might to 4:88 or 5:13 gear ratio. I have the RC tube fenders which gave me a few extra inches of clearance. Great build so far can't wait to see more.
@4WDTrek2 жыл бұрын
I have not re-geared my jeep. On the 35s, it seems plenty fine. I even just stepped to 37s. Honestly, I don't drive my jeep like a race car. I drive it like a jeep. I know it's supposed to be slower to accelerate and I slow down for corners. I honestly don't really notice all that much. I accelerate fine with most other cars on the road and I hold 75 on the freeway easily.
@benwillcocks82502 жыл бұрын
Might buy this kit as a budget lift so I can finally get 33s or 35s and get the ugly stock wheels gone
@4WDTrek2 жыл бұрын
I hear that! Definitely a good lift to throw on without spending a lot. I thoroughly enjoy my lift
@Skooterboy0610 Жыл бұрын
Did you do anything with the stock driveshaft or had that already been replaced with aftermarket?
@4WDTrek Жыл бұрын
I kept the stock drive shaft for almost the whole two years. I did end up breaking the CV section off the front drive shaft after about a year and a half of it. Replaced it with another stock one for about 6 months til I was able to get a new drive shaft for it.
@maginusjames88592 жыл бұрын
I have that on mine and the only thing that bugs me is it wobbles side to side far too much for me when I went to Sand Hollow in Utah and did some rock crawling.
@4WDTrek2 жыл бұрын
What part is wobbling side to side? Sounds like maybe an alignment or some warn ball joints or wheel hubs
@maginusjames88592 жыл бұрын
@@4WDTrek oh no not any parts, the entire Jeep wobbles side to side so much. lol my wife calls it the wibble wobbles now.
@ikedemapanjr.33702 жыл бұрын
maybe shocks are a bit too soft?
@ikedemapanjr.33702 жыл бұрын
I have the same lift kit on my 2015 jku and my jeep sometimes has death wobble, so idk what to replace to fix it.
@4WDTrek2 жыл бұрын
That could be a number of things. Ball joints, steering components, an alightment, wheel bearings, or even uneven tire pressures.
@twitchclipscentral12 жыл бұрын
I have the same kit on my jeep and I got it installed about a month ago and it seems like it has dropped about half an inch or an inch, do you have this same problem
@4WDTrek2 жыл бұрын
The suspension will settle after installation. When I installed my lift, it sat about 4 inches higher. It settled the half an inch.
@tylercrowley4589 Жыл бұрын
What size tires are you running on the 3.5 lift?
@4WDTrek Жыл бұрын
I am currently on 37" tires. Things are about to change though... keep an eye out for that!
@zacharyturner924510 ай бұрын
Does it come with new springs?
@4WDTrek10 ай бұрын
Yes it came with new springs
@robh5789 Жыл бұрын
You won't even be able to fit in your garage mine barely fits in the garage and it's stuck
@4WDTrek Жыл бұрын
It's literally in my garage right now perfectly fine.