Rough Ryder Classic Carbon Utility Linerlock Knife - Both RR and I struggled with this one...Lordy

Рет қаралды 2,144

Жыл бұрын

Rough Ryder Classic Carbon Utility Linerlock Knife - Both RR and I struggled with this one...Lordy.
Well a first for me. Issues I did not feel good about with the Locking one this guy. But time will tell...Secondly.....I kept messing up with the blade steel..Getting Old I am.
Thanks for watching
2CG
#roughryderknives #knifereview #RoughRyderClassicCarbonknife
MY PERSONAL LEARNING TO SURVIVE, personal prepping website for a novice planner:
www.novicesurvivalist.com
Look me up on Facebook: The Novice survivalist Page
Instagram: 2nd Chance George
***I WILL BE HAVING SOME CHANNEL BLING SOON STAY TUNED***
Please stop by and check it out.
-------------------------------------------------------------------------------------------------
BELOW ARE SOMETIMES LINKS TO THE "STUFF" I USED IN THIS VIDEO:
FTC disclosure: This post or video contains affiliate links, which means I may receive a commission for purchases made through my link.
THANK YOU FOR SUPPORTING MY CHANNEL.
2CG
--------------------------------------------------------------------------------------------------
Green Monday by Twin Musicom is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/...)
Artist: www.twinmusicom.org/
---------------------------------------------------------------------------------------------------
FAVORITE YOU TUBE CHANNELS I USE FOR REFERENCE AND FUN:
/ taoutdoors (TA Outdoors)
/ @myadventureoutdoors (Adventure outdoors)
/ @thepreparedwanderer (Prepared Wanderer)
#outdoors #bushcraft #icefishing #camping #walkabout #reviews #flyfishing #kayaking #hiking #bushcraft #DIYwoodworking
Copyright 2nd Chance George 2023
~-~~-~~~-~~-~
Please watch: "Opinel No 9, Modified Guthook, Squirrel Hunter Knife and DIY Sheath"
• Opinel No 9, Modified...
~-~~-~~~-~~-~

Пікірлер: 48

@71simonforrester 5 ай бұрын

I had the same with a Buck 110 that was bought for me as a gift. I used WD-40 and operated the blade and lock for a long time and a couple of changes of WD-40. I then cleaned and dried it and added a little 3 in 1 oil. It works great now.

@2ndchancegeorge 5 ай бұрын

Huh..gonna have to do that thankyou. Much appreciate the input. You be safe

@jamesflener6889 Жыл бұрын

One out of many,not bad odds! I like that style, best of all.

@2ndchancegeorge Жыл бұрын

Love the sod buster work knife style my favorite. Thanks for watching 👍

@TBEDC Жыл бұрын

Great video..anytime I’ve had a issue with a RR they took care of it..great customer service..old school liner-locks are awesome..I’ve seen those on knives from the 1800’s..cool

@2ndchancegeorge Жыл бұрын

They are great. Some wd40 took care of it. Thanks for watching. Appriciate that support 👏

@mikebohling2280 Жыл бұрын

Thanks George, this is the information I was looking for ! Good job !

@2ndchancegeorge Жыл бұрын

Thankyou sir. For watching

@charlesclaridy8646 Жыл бұрын

Great video as usual George. I have a "Few" Rough Ryders. Good value for the money!

@2ndchancegeorge Жыл бұрын

Thankyou sir. Appriciate the support as always. Love em Rough Ryders.

@erikcornog9479 Жыл бұрын

Good Video! Ive had this knife for a few years and I really like it. Ive never had the problem with it not locking up maybe like you said it just needs cleaning. When I got the Classic carbon barlow it was so tight it bent my thumb nail back until i discovered some black gunk in there so I sprayed some wd40 in there to loosen it up and then cleaned and oiled it and its fine. maybe that will work with this knife.

@2ndchancegeorge Жыл бұрын

I put some well a bunch of wd40 and cleaned it out. It loosened up and has not had the lock issue since. Thanks forvthe support.

@James-ke5sx Жыл бұрын

Don't worry. I have 4 RR's with this lock. It will wear in, just clean and oil it. I use mineral oil for pivots and vaseline for the blades. If it was perfect then when it wears in it would be loose. Also this lock pushes the blades off center, it's normal. If you open the blade halfway and then flick it hard the lock will work perfectly. I'm a retired carpenter and somewhere in the past I had that same wooden level I wouldn't be surprised if I still have it somewhere.

@2ndchancegeorge Жыл бұрын

Yep once I cleaned it up it works great. It's still tight so time will fix it. Never thought about Vaseline. Good idea. Thanks for watching always appriciated

@94slingshot Жыл бұрын

I’ll bet it’s just manufacturing crud that’s keeping the lock from snapping into position. I get an audible snap when I open the blade on my knife. Good review George.

@2ndchancegeorge Жыл бұрын

You are correct. Wd40 and a brush took care of it. Thanks for watching and commenting. Always appriciated

@EDCandLace Жыл бұрын

Another George video!!!!!

@2ndchancegeorge Жыл бұрын

Whoot. Thankyou my dear. Hope all is well

@tonynapoli5549 Жыл бұрын

It’s a nice knife good price must be a one off, good edge too. Liner lock give it a clean should be ok. Needs wearing in, in my opinion .

@2ndchancegeorge Жыл бұрын

Yep cleaned it. Still a little tight but over time it should be 👍

@jamesmcgee2447 Жыл бұрын

Let us know when you clean it up and how it works , many thanks.

@2ndchancegeorge Жыл бұрын

Cleaned it out with wd40 and a brush. Now no issues with the lock and the opening and closing although a little tight us now nice and smooth. Thanks for watching

@jaredbryant8297 Жыл бұрын

I suspect the swedge exist for two reasons… looks and practicality. Today’s customers like a little thicker blade stock so it allows for a better and finer point while making a thick stock. Also add contrasting lines, and some might say a defensive blade/tacticool look

@2ndchancegeorge Жыл бұрын

Yes they do it to get a finer point. Tactical thing...stabbing. but it looks cool too. Thanks for watching and the support.

@jaredbryant8297 Жыл бұрын

@@2ndchancegeorge I fixed some of my spelling mistakes LOL

@2ndchancegeorge Жыл бұрын

@@jaredbryant8297 thats OK I never check ...lol. Be safe

@Lex5576 11 ай бұрын

I know it's not the place of the consumer that buys the knife to do this, but an easy fix for the liner lock tab is to close the blade into the handle and take a woman's nail file and lightly file down the top of the brass lock tab just a tiny bit so it'll lock up each time. The tolerances have to be just right. If the lock tab were made of steel, it would have more spring in it and snap in place with more authority. Not so much with brass, the tolerances have to be loose to allow for the weaker spring.

@2ndchancegeorge 11 ай бұрын

Lol...I prefer to fix then send back so appriciate the tip. I'll certainly do that. Thanks for watching always appriciated 👍

@Lex5576 11 ай бұрын

@@2ndchancegeorge Oops! I told you wrong George. After looking a little more closely, I realize you'd never be able to file down the brass locking tab if the blade is partially closed. You'd instead have to file down the heel of the blade itself where the tab engages it. Either way, it wouldn't take much. Carbon steel is a little easier to work with a file. I love the patina you can get with time on carbon blades.

@2ndchancegeorge 11 ай бұрын

Lol...I saw that. Thankyou.

@Orlosthedruid 2 ай бұрын

I got one of these myself...gonna warranty it out with SMKW, cause, the liner lock will not move at all.

@2ndchancegeorge 2 ай бұрын

Yeah...not surprised with this one. R R seems to drop the ball on it. Be safe

@rickyhurtt5568 Жыл бұрын

Yep the lock is just a hair too long. I've had a few over the years like that. The ones I could take apart I fixed. Not much to be done with that one. But being brass it should where down a bit with use

@2ndchancegeorge Жыл бұрын

Yep. It's getting better. Thanks for watching always appriciate your support

@michaelkulman7095 Жыл бұрын

Since they give you a protruding liner lock you can always check it moved over? Maybe move it manually? I understand it may wear in or you may clean and oil it and then it may work but since we've seen it fail I'd feel I need to check it each time personally which with this design is perhaps a good thing? I'm sort of serious, I would probably push on the lock each time... I once had two different no name liner locks fail so I lean towards kickbacks myself... I do like the looks of this one ...

@2ndchancegeorge Жыл бұрын

I found myself checking it everytime. Maybe it will wear in and I'll grow to trust it. Time will tell.thanks for the support, always appriciated

@petermann3804 8 ай бұрын

Very nice knife 🔪 👌 👍 from Peter 🇦🇺🇦🇺

@2ndchancegeorge 8 ай бұрын

Yep, gotta love a big sod buster. Thanks for watching 👍. You be safe out there

@mrseuff617 Жыл бұрын

It’s because it’s dirty from manufacturing I’d imagine, and Case XX sod busters don’t even have liner locks because the liner lock pressure pushes the blade over out of center

@2ndchancegeorge Жыл бұрын

Yep cleaned it much better