I’m proud to announce that I bought a Royal Enfield Himalayan 3 weeks ago and I love it 😃👍🏻

Great video Stuart, really easy to follow your instructions, very clear. Listening to you is always like an ode to common sense and no b.s., very refreshing.

You missed a very important step - the obligatory cup of tea in your shiny new RE mug :)

That fly screen complements the bike nicely, it adds rather than detracts from the look. Good choice.

Stuart. I have to say you are wasted on KZfaq. You need a TV show. Your.voice is just so relaxing to listen to, I came for the bike and now it's just to listen to you describe everything in the most nostalgic way without even trying. Keep up the good work

Just as an update, the 2021 RE Interceptor 650 ditched the top screw on the headlight housing. There are now just two screws at about 4 and 8 o'clock on the headlamp, and a notch on top of it that the bezel slides back into. The only process change from this video was A) not needing a very long screwdriver, and B) screwing in the smaller bolts on the flyscreen as the last step, so as to be able to slide that notch on the headlamp unit back in place. Cheers and thanks for the guide, Stuart!

Stuart, I find all of your videos so well thought out, sensible and just brilliant. Thanks for enriching my riding experience!

I have the flyscreen, I now have my Interceptor, Now to do this "20 minute" job! I see this as maybe an hour with a tea break in the middle to settle my nerves as I work on my new bike. This video definitely gives confidence.

Stuart, thank you so much for your instructions. I don't have much experience but really enjoy working on my bike and these videos truly are a pleasure.

Stuart, followed your video to the "T" & assembled my windscreen in 20 minutes. Thanks my good man.

Love your videos Stuart from the cinematic opening scenes to the actual content and commentary.

Good info. I just bought a flyscreen for my Interceptor as was a bit daunted by the supplied fitting instructions. Watched Stuarts video and the confidence level went through the roof. Excellent instructions, especially the tips on wiring and the long screwdriver. Outstanding!

The tiny manual (I used my magnifying ring I use for soldering to read it) says to do one side at a time to avoid disturbing the headlight aim. The issue then is loosening and tightening the Indicator nuts, open ended spanner, and then fitting the screen to the already installed brackets are they required a bit of persuasion to line up with the screen after they were already on the bike.

Hope to get the Interceptor in chrome next year from LMT. So looking at your videos it's going to make it a lot easier to bolt on all the goodies I have planed for her. Thanks for taking the time to do these videos.

I hope to get an Interceptor next year. Your vids are fantastic. Very enjoyable, and informative. The fly screen looks great!

This "Big Girl's Blouse", with a screen on his Roadking , enjoyed another of your videos !!

Got a screen...yes they are back in stock...and followed your fitting tips to the letter. Right first time. Another excellent video, thanks Stuart.

Stuart, I just picked up a gently used Interceptor 650. Your videos were very helpful in helping me learn about the bike and make my final decision to get one. Thank you!

Installed and tested the tall windscreen. This work better than I expected and just as you said it would. High quality item that fits the bike perfect. Combine this with the motne risers and it completely changes the look of your instrument cluster for the better. Love this bike, sold the Himalayan yesterday.

Another pre-fixing short for my tall flyscreen, received just yesterday. Looks straight forward Stuart. Thank you.

Just added this to my RE INT 650 this morning. A few things of note. 1) at least on my bike there is no top screw on the headlight mounting. Only two side screws. Not sure if this is a USA-spec thing or what, but I spent a good 10 minutes looking everywhere for that top screw, only to take a chance that removing (all the way) the two side screws would allow the housing to release. It worked. 2_ I followed the directions in the kit, and that allowed me to avoid taking the entire headlight off and recalibrating headlight level afterwards. A bit of a pain but not too bad. 3) There is a small but noticeable gap between the metal “Royal Enfield” plate and the screen itself. It is as if they are bent at different angles. It not not a major issue as the screen housing fits very nicely on the bracket, with no forcing of any kind, but a bit strange. 4) I do like the look and fit of the screen. It gives the bike a nice finished look, especially on the black colored bike. Wind blast is only slightly reduced, however. Don’t count on this to be a wind blocker on the order of a windshield. It is not. Rather, it gives a bit of relief at highway speed. But it didn’t change the angle of the wind, in my case at least. It still hits me at the top of the shoulders. But I’m keeping the flyscreen - I am quite happy with it. Next step - bar end mirrors.

It looks very thoughtfuly designed and looks quite smart. Nice video explaining the details. I'm really liking the RE.

Thank you for this vid!! Bought a 2021 RE INT last month and love it. I've been upgrading since i got it and wanted this windscreen but didn't want to pay my dealer more to put it on than the screen cost itself. Watched your video twice and an hour later I was riding! The 2021 headlight bezel has 2 screws at the bottom holding it on vs your 1 at the top but other than that spot on. Nice work and keep riding safe.

Cheers for the info Stu. I fitted a tall fly screen today and found it easy after watching you. I didn’t even try to read the included instructions as I couldn’t find a microscope. For information, the 2022 Interceptors ( and probably GT) don’t have a single screw at the top of the shell. They have one each side about 45 degrees down from the centre. You have to remove these fully to remove the lamp. when replacing the rim, there is a slot on top of the shell that a spigot has to slot into first. Keep up the good work. 👍

Thank you sir for Posting this amazing installation video of the fly screen of interceptor. You always update best and helpful content. I was able to assemble and install the windscreen easily. Thank you sir🙏🙏

Appreciate the fine video. Royal Enfield have repositioned the headlamp screws to the side of the dome and just below the indicators. This is seen on my late 2020 Interceptor which has the clear lens headlamp. I have not tried opening the headlamp assembly to check if only partial loosening of the screw is required to access the wiring within. There are two screws visible. One on each side.

Just picked up my Interceptor 650 this past Saturday... Yeah, it's awesome. Thanks, Stu-Beef, for the recommendation!

Just put my screen on today in less than 30 mins thanks to your video - so much easier than trying to read R.E instructions - cheers!

This is the best video out there. Thank you for this. Can’t wait to get the flyscreen for my continental gt 650.

Keep making great videos stuart we are very fond of you..loads of luck have a great day

Great video on how to fit the fly screen Stuart , much appreciated, Thank you .

This "Big Girl's Blouse", with a screen + extender on his tiger 800 enjoyed your video. The best screen I ever had, I'm 6'4", was an ex-police Avon fairing on my BSA B33 & sidecar. I looked over the top of the screen & the snowflakes went straight over my crash helmet. Amazing to watch. Worked in the rain as well. Never had another screen as good.

I really like watching your videos. The sound and picture quality is excellent and I can understand every word you say and you don't go on and on about useless information like some videos do.

Brilliant job this saves me time having to read these tiny instructons. Cheers!. Ok ive done the job as per instruction for this video and it turned out good. I opted for the longer bolts provided as i believe it needed them. If i was to do it again i would do the brackets first then the screen to the brackets.

What a great simple useful instructional video Thanks for sharing 🙏🏻

Great video and it made the installation so much easier. Keep up the good work.

Excellent video Stuart! The interceptor looks like a brilliant bike. 👍👍😎🏍🇬🇧

Just fit my fly screen on, thanks so much for your video! 😊

I've ordered this and crash bars for my 650. Great video.

before loosening the headlamp, point the bike at a wall and mark with tape where the top of the beam hits the wall. then on reassembly you can use this to align the headlamp beam as it should be

I enjoy doing stuff like that, especially with quality parts... very satisfying.

Who even dislikes this?! I guess old school engineering doesn't rev their hearts.

Thank you for your video. I was able to mount mine easily thanks to you.

Another great video - thank's Stuart. I just installed my fly screen on my new I(2019) Interceptor. My headlight was different than yours - mine has 2 screws that must be removed completely to get the light cover off. There's also a tab at the top that required me to remove the screen in order to reinstall the light cover. Royal Enfield has obviously made some improvements to the headlight assembly.

Aahhh Marfleet roundabout onto Hedon road towards Hedon, a nice smooth road with roundabouts- Nice 👍🏻

Turn signal connections do take quite a bit of unnerving prying. This turned out to add more than a few minutes to the installation of my GIVI pannier racks, trying to be careful figuring out just the right amount of poking and prying to get them apart still reasonably intact.

Thanks a lot for this video ! I would never be able to do it on my own without it ! 🙏

Thanks for the video! Got the screen in the mail and it’s great quality!

Enhances the look of the bike no end.

I really like the looks of the Royal Enfield. Very classic looks. I want one.

Hi Stuart !! Thanks for your work... Like your style. Thanks and gretting from sunny Paris.

Real nice videao Stuart. Clear thinking and application. That soundtracks great...somewhere between Santana and Ennio Moreconi? Very nice. Thank you.

Excellent video... I think I could actually do this myself you made it look so easy! 👊😎👍

I can’t wait to get my new Interceptor 650. I bought it last week. It’s my first motorcycle after 5years with scooter HONDA PCX 125, at the age of 42 😁.

The headlight screws on the 2022 model are on the sides, so no need to se longer screws. I also recommend installing the holding brakes first and leave the shield to the end. This makes fastening the indicator lights a lot easier I found.

I pulled the trigger on a Mk3 yesterday... Awesome bike.

This is the first I've researched into any measure of wind protection for a 650 RE. Having this knowledge probably increases the likelihood of me really really wanting a Continental GT by 37% conservatively.

I surely do appreciate your Quality Compass.

Hello you fine sir. I used your instructions to install the windshield. Thanks a lot for the help. Greetings from Germany.

Thank you. I just installed it bases on your video.

Thanks, your instructions were perfect.

I have just fallen in love with fly screen because of your narrative

Stuart, your videos are the best. Now... My Interceptor was made in March 2019 and... The two screws holding the headlamp bezel were at 4 o'clock and 8 o'clock negating the need for the long screwdriver. I also found the original bolts longer than the replacements and I had a spring wire attached to the headlamp attachment bolts that held all the wires. Maybe they have changed the design or have different factories??? Either way it was easy enough but just different on my bike

Thanks for this video Uncle Stu😁

Thanks much. Now I'm off to install my tall flyscreen on my lovely Continental GT 650.

Excellent video mate!!!

Cracking video Stuart

My Road King and Screen appreciate the shout out! 😂

Sorry to keep bugging you. I installed the Fly screen today, thanks to your video, it wasn't very hard.. The "One bracket at a time" plan did not help keep the headlight aligned. It went from "examining the tread on my front tire" to "looking for enemy aircraft" as I tightened the nuts . I guess it's kind of in the middle now. As for it's effectiveness.. it is very much worth it. I could feel a definite improvement at speed and could easily ride for 2 hours without fatigue. My scooters and my RE 500 all have wind screens and they are nice....but I wanted something different for my Interceptor.

Thanks Stuart great job

Stuart Fillingham your narration is movie like, you look like Clint Eastwood, albeit from England with that accent. 😀

I've just fitted mine and the instructions here were very helpful. However, I didn't have a long Phillips or pozidrive screwdriver. I was going to drive to screwfix or toolstation and get one especially, until I had the idea of doing up the headlight before it was tightened on the bolts. I just angled it down, put it on and tightened up the screw . Then I angled it upright and tightened the lamp bolts at the side. What have I missed doing it this way? I'll probably find out in a minute when I take it out for a ride.

siempre tan curioso trabajando, así da gusto

Aaaaaaaand....sold! Great video, thank you!

Hi Stuart, thanks for the very informative video. How do you think this 'tall' flyscreen would compare to the 'short' flyscreen that RE offers? I am 6 feet tall and am trying to decide between the two. I like the look of the shorter one, but think the tall one might provide better comfort. How effective do you think the 'short' one would be? Thanks!

Hi Stuart very detail video, glad that you have it. I'm about to put my fly screen myself, wish me luck. On the other hand on the beginning of your video when you cruising the country road i'm thinking the same about that white headlamp bright, with what product you change it ? the manufacture comes with yellow bright and it's looking good with white is that LED lamp ? . Thanks Stuart !.

Hello Sir Nice Informative Video ... thank you

Great "How to" video Stuart!

Just received my screen but it came with four stainless steel "top hat" pieces that go inside the screen mounting rubbers which means the mounting screws cannot in theory be over tightened.

Thank You.

Top vid mate.

Seen your vidéo tomorrow....i follow step by step .....i'd tried to fixe it.....top i done it !!!! Thank you !!!!!

Love the Tergui music ❤

Do you still get the wind in face feeling?

Brought me to 70's

Hi Stuart, a Great Detailed video of how to install the screen, totally agree with RE instructions being small , requiring Steve Austin eye sight to read them. Can't help but note that you now have a different screen, any particular reason?

Can I fix this flyscreen on the Himalayan? Without any changes?

Did you remove the foam pads from the stainless part of the fly screen? I left them on and there is a big gap between the stainless and the Perspex, not sure if I should remove it, maybe there to prevent vibration.

Another good video. I saved the hassle and had the dealer fit the screen. How are you going on with the position of the foot pegs and the seat? I'm thinking of getting the touring seat.

Nice one Stuart

Looks better with it than without it.

Awesome!

Very nice piece of kit there! Now, what's the background music?

Does the fly screen really work? Got my orange crush, been a week I cannot tolerate the wind buffeting.

I wonder if you could get a Renthal handlebar of the same dimensions? That crossbar kind of bothers me.

Not sure it would have worked out but I would be tempted to install the brackets one side at a time so as not to have to readjust the headlamp aiming, attaching the fly screen to the brackets last.

very helpful!

とても素晴らしい内容でした。 これで安心してスクリーンの取り付けができそうです。

Any advice on what product to use on the chrome tank version? Ive heard they are a nightmare to keep clean

I just received my short fly screen for my 2020 Continental GT. Thanks very much for your install video as the supplied instructions need a microscope to read. I have one question though, my kit came with four SS flanged inserts that look like they are meant to be inserted into the rubber grommets. The thing is I can't find any info on these inserts. Which way should they be inserted into the grommets, from the front side or the back side of the screen? I figured that as you know everything there is to know about the RE 650 you would be able to answer my question. Thanks Don