RPM Indestructible A-Arms for the Team Associated Rival MT10

No video

RPM Indestructible A-Arms for the Team Associated Rival MT10

Рет қаралды 5,041

Күн бұрын

Finally, there is a solution for the weak A-Arms on the Team Associated Rival MT10. RPM has recently come out with these arms and I got them installed on my Wife's truck and she bashed. Turns out these have lasted longer than any of the factory arms we have put on. Not only that but they are symmetrical and easy to swap between sides.
Front RPM A-Arms: amzn.to/2UgctoY
Rear RPM A-Arms: amzn.to/3w3t6Sh
-
Rival MT10: amzn.to/38ZiHNM
Ovonic 2s Battery: amzn.to/3b4ODTN
Ovonic 3s Battery: amzn.to/3oo4LmQ
Charge it with this: amzn.to/39bLqjJ
Info from RPM:
The RPM Associated Rival MT10 Front A-Arm Set is an optional upgrade for the stock plastic arms. Whether bashing or racing, RPM A-arms are the toughest A-arms on the market so a rough landing or a hit from your buddy won’t ruin the fun. Made in the USA and designed with unmatched performance, exceptionally lightweight materials and extreme durability, RPM A-arms will outperform and outlast the competition!
RPM72062 replaces the front A-arms from stock Associated ASC25804. RPM72182 replaces the front A-arms from stock Associated ASC25804.
----------
DISCLAIMER: This video description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission.

Пікірлер: 20

@RCRoads Жыл бұрын

Thanks for turning us onto the RPM A-Arms. I just picked up an MT10 and hopefully the arms will hold up a while just light bashing around. It seems like a great little truck for the price.

@rcreviews9894 3 жыл бұрын

Just did a run with this one, pretty decent truck for the price, LEDs and front and rear sway bars stock is a pretty cool added feature stock, after ramp jumping it in the run, I didn’t break any a arms but I did break off the wheelie bar on a hard landing

@lopieslopezpm 10 ай бұрын

Had to use my Dremel. 3 were way to tight. Thought I was gonna damage the shocks getting them on. Hope these arms were worth the hassel.

@timpickelman4096 Жыл бұрын

You can use the shock protection on the rpm a arms I’ve had rpm’s on my mt10 for a year now and have had them shock protection on them the whole time they stay in place perfectly and do there job

@isaiahfurrow7414 2 жыл бұрын

RPM is good stuff!!! Anything that breaks, of RPM makes it that is the way to go for a basher rig...

@richsmith6810 2 жыл бұрын

Great video 👍, new subscriber from the UK

@orlandocruz5581 3 жыл бұрын

6:25 it happens to me too with my stock arms when I bash onroad

@JrsGasolineAlley 3 жыл бұрын

Interesting, must be something to pay attention to

@t3floz Ай бұрын

Awesome! How has the car been holding up for you now 3 years later?

@JrsGasolineAlley 29 күн бұрын

great

@t3floz 28 күн бұрын

@@JrsGasolineAlley nice any problems?

@rixsta911 2 жыл бұрын

That wasn't the only option 👍

@JrsGasolineAlley 2 жыл бұрын

It was the option that worked for me. I apologize for missing whatever option you would have liked.

@Nlangkirby135 2 жыл бұрын

I have that same problem with my rival Mt10

@JrsGasolineAlley 2 жыл бұрын

Fix it up

@jamesbrooker6391 Жыл бұрын

I can’t seem to get the suspension back on any one had the same problem?

@JrsGasolineAlley Жыл бұрын

start removing the parts until you find where you went wrong.

@whitetiana3022 Жыл бұрын

i can't manage to get the shocks to fit the arms to save my life FFS fucking garbage arms with shite tolerances

@ohwell2790 Жыл бұрын

Just take a file to the ball joint ends and file them down to fit, they are brass, easy. And yes that is how I had to do mine to make them fit. Use your brain and figure it out and do something about it. These arms are much stronger and will get the gob done. And. grow up!

@Schmidt3850 Жыл бұрын

If you are a hardcore basher like l am nothing is indestructible I have broken several rpm arms on my Traxxas and Arma trucks the toughest a arms yes. Indestructible no.