RSLogix 5000 Add On Instruction Use

RSLogix 5000 Add On Instruction Use - AOI Use

Рет қаралды 43,009

7 жыл бұрын

This video shows how to use the Add-On Instruction we made using RSLogix 5000 which is the same process for Studio 5000 Designer. Using the Rockwell platform for AOI is an excellent way to make programming a quick and easy process.
Check out our training center:
www.allen-bradley-plc-trainin...
Also, check out this video: • RSlogix 5000 Add-On In...
Here is the link to the first video where the AOI was made:
• RSLogix 5000 Making An...
onlineplcsupport.com/
/ onlineplcsupport
#Add-On Instruction
#Emulator
#FactoryTalk
#Training
#RSLogix 5000
#Studio 5000

Пікірлер: 56

@ShaneWelcher 3 жыл бұрын

*Check out our training center: **allen-bradley-plc-training.teachable.com/*

@oladipoyinka4720 5 жыл бұрын

You still got an accolades from me after two years of this lovely piece.

@louischatfield3831 7 ай бұрын

Great job showing how to use the add on instruction in a Rockwell PLC.

@ShaneWelcher 7 ай бұрын

Thank you for the kind words

@LAFAMA5759 4 жыл бұрын

You Are A Good Teacher Shane!

@ShaneWelcher 4 жыл бұрын

Thank you

@andypeterson2682 5 жыл бұрын

Aprecio mucho vuestra gran ayuda, no se imagina lo que hemos aprendido gracias a su generoso aporte, una vez mas muchas gracias...

@ceilingwalker1 2 жыл бұрын

You really are a good teacher! Thank you

@ShaneWelcher 2 жыл бұрын

Thank you, glad to help

@johnmayberry7289 7 жыл бұрын

Best video thank you! And you included function block!

@ShaneWelcher 7 жыл бұрын

John Mayberry Glad you liked it, any ideas you have or would like to see the new just let me know. Thanks for the support, Shane

@ArvindKumar-sz1pc 5 жыл бұрын

THANK YOU VERY MUCH.GREAT JOB

@kofibonsu4774 6 жыл бұрын

great job done there!

@ShaneWelcher 6 жыл бұрын

Kofi Bonsu Thank you for your support

@americanautomation7028 6 жыл бұрын

Thank you very much , great job

@ShaneWelcher 6 жыл бұрын

Glad to help

@mrtrader4628 7 ай бұрын

Hi Shane Thanks always for your kindness and willingness to help to help the KZfaq community. I truly appreciate it. Now what I have going on is an AOI in FBD, but my inputs and outputs are all on the same side of my AOI so My output wires don't connect. This is my 1st time trying so if you can let me know what step did, I miss setting up my AOI. RS Logic V20 Thanks Darren

@ShaneWelcher 7 ай бұрын

Make sure your tag parameter type is correct for the add-on instruction tags. make sure outputs are outputs and inputs are inputs. Also, you can make them visible and not visible in the add-on instruction properties as well. Hope this helps

@mrtrader4628 7 ай бұрын

I have all the tags as bools outputs. what is you email address.@@ShaneWelcher

@LAFAMA5759 6 жыл бұрын

Awesome Shane!

@ShaneWelcher 6 жыл бұрын

FERNANDO GARCIA Thank you for the support

@LAFAMA5759 6 жыл бұрын

Hi Shane! Have you simulated RSLogix Version 30? Also what is argument column in the AOI for?

@ShaneWelcher 6 жыл бұрын

Yes, I have but only with the emulate version 30 as every emulate has to have the same emulate as the version of the software used. I have several versions of AOI but haven't published yet.

@ngovantruong2929 5 жыл бұрын

thank you so much

@palwindersingh8080 7 жыл бұрын

Very good video.

@ShaneWelcher 6 жыл бұрын

Palwinder Singh Thank you for the kind words

@vechekaly1255 6 жыл бұрын

so good for videos

@ShaneWelcher 6 жыл бұрын

Thank you for the support

@ShaneWelcher 7 жыл бұрын

Thanks for the support, I have more information that could help at OnlinePLCSupport.com which is not finished but does hold a great deal of support info.

@iankerrigan7214 6 жыл бұрын

Hi Shane, Great video, do you have a topic for the new powerflex 527 drives, using motion? (this is the only way to control theses drives now) only to start, stop, reference for a Fan or pump for example????

@ShaneWelcher 6 жыл бұрын

I could make one when I have time, I am on a project right now that is eating up my time. Do you want setup, config, and control?

@iankerrigan7214 6 жыл бұрын

Hi Shane, i can do the setup without problem, its just using the Motion commands to start, stop, and speed reference etc....Im confused with the motion commands, do I use MAM or MDO to start the drive, any help would be greatly appreciated Ian

@ShaneWelcher 6 жыл бұрын

Here are some of my older videos that should answer your question as far as controlling a servo which is how you show control a CIP drive. Motion video 1 kzfaq.info/get/bejne/ncWTl9aT3ZzFcYU.html Motion video 2 kzfaq.info/get/bejne/b6-ihrenmKu-oWQ.html Motion video 3 kzfaq.info/get/bejne/mLNgaJWKt6jeioE.html Motion video 3.5 kzfaq.info/get/bejne/Z8ySgbuistjPpWQ.html (sound quality is low...sorry) Motion video 4 kzfaq.info/get/bejne/pLVhjbmctqyqhJ8.html Hopefully these help out, let me know if I need to clarify anything. Sorry about the sound quality, these are when I did not have a condenser mic. Thanks, Shane

@Tracks777 7 жыл бұрын

When is your next video? :D Keep it up!

@ShaneWelcher 7 жыл бұрын

I have videos producing every week however I would like some ideas about what you would like to learn from. If you have any ideas then send me a comment back about them and I will make a video for training. Thanks, Shane

@10mosman 7 жыл бұрын

Good job and excellent presentation; you should be a teacher. By the way how can I get the emulator 5000 and RSLogix 5000 softwares?

@ShaneWelcher 7 жыл бұрын

Blulus Thank you, if you happen to have any ideas or needs then let me know and I will make a video about that topic. Thanks, Shane

@joebilby1007 8 ай бұрын

I may have missed this but instead of creating a tag and aliasing it to an IO address, could you put the IO address directly into the AOI? Is there a benefit of doing it one way over the other?

@ShaneWelcher 8 ай бұрын

It's best to alias the bit because of multiple uses of the AOI although yes, you can use a standard input

@sudhandiramanisundaram4909 3 жыл бұрын

Hi, I have followed instruction after created AOI function called for Main loop, I did not add found the New tag options when right click

@ShaneWelcher 3 жыл бұрын

Maybe these videos will help out friend. More Add-On instruction videos. kzfaq.info/get/bejne/hr2XbMWdmpPPYKs.html

@Kalleweed 7 жыл бұрын

this very good

@ShaneWelcher 7 жыл бұрын

Kalleweed Always happy to help, any ideas for future videos then just send them my way. Thanks, Shane

@Kalleweed 7 жыл бұрын

how can i get more training from you

@ShaneWelcher 7 жыл бұрын

Just send me an email at plcsupport@onlineplcsupport.com then we can talk more about what you would like to see ad how I can help. Thanks, Shane

@Kalleweed 7 жыл бұрын

i did send you an Email about 2 hours ago but no responce

@ShaneWelcher 7 жыл бұрын

Kalleweed I sent out a response about five minutes ago, did you not get it? It was from my personal email

@goranhikl5723 3 жыл бұрын

Is there a way to modify anything inside the AOI once created ?

@ShaneWelcher 3 жыл бұрын

Yes

@goranhikl5723 3 жыл бұрын

Thank you

@ShaneWelcher 3 жыл бұрын

@@goranhikl5723 You need to do that offline, in some instances, unlock it if the vendor locked it

@haroldoxovin5309 6 жыл бұрын

Plis in spanish thanks

@ShaneWelcher 6 жыл бұрын

Google translate may help you out my friend, sorry but I do not speak anything but English, I could have it translated but I am not sure.

@AA-bf2my Жыл бұрын

You’re awesome You are now my sensei 🫡

@ShaneWelcher Жыл бұрын

Appreciate your comment