No video
RTU5024 Gate Opener | GSM Controller SMS Commands Tutorial
Рет қаралды 30,243
Күн бұрынWebsite Article - learnitstepbys...
How to install This app on any Android device - • Installing RTU5024 mob...
RTU5024 Motor Controller Build - • RTU5024 Control Panel ...
Power Supply Built for RTU5024 Project - • Power Supply for RTU50...
RTU5024 SMS Commands Tutorial - learnitstepbys...
What is inside RTU5024 Gate Opener - • RTU5024 Whats inside G...
RTU5024 Not working fix - • RTU5024 Troubleshootin...
Differences Between RTU5024 Gate Openers - • Difference Between RTU...
Affiliate Links -
RTU5024 Gate Opener - amzn.to/3GISzGl
RTU5024 Gate Opener Antenna Extension cable - amzn.to/3pXlVd0
Wall mountable GSM antenna with cable - amzn.to/3DWvCgS
@learnelectrical3d 2 жыл бұрын
Website Article (Detailed Version) - learnitstepbystep.com/video/rtu5024-gate-opener-tutorial/
@mariwanyandaziar 2 жыл бұрын
Amazing
@amnemd7959 29 күн бұрын
Hello i have a problem with my device , when i turn the relay on by command it turns on but i dont get back the sms confirmation like before , and when i try to turn the relay off by commande it doesn't turns off any help please ! I factory reset the device but still the same prob
@ree2028 Жыл бұрын
Hi, I have a problem with this item. All seems to be working ok except for I can't change the relay close time! Ive tried everything following the instructions given, even trying the reset, but it still wont change the close time. I keep getting message 'Command error, re-send command Please' Can you please advise if there is anything else I can do or is this a faulty item that needs replacing. Thanks Ian
@alvaroogazn.5052 3 жыл бұрын
hello. I receive multiple messages from gate opener and I cant find what is it, even in user manual, do you know what it means: CTXXXX with xxxx a decresing number every message. Thanks.
@learnelectrical3d 2 жыл бұрын
It shouldn't send such message ..
@sasayaya37 Жыл бұрын
Bonjour comment je peux gardé la dernière position de relais en cas de coupure d'électricité.
@peterflaska8512 2 жыл бұрын
Hello my device is not able to switch a relay from authorized number. I have set a master with 001 position and another with position 002. Non of these can control the relay. Only if I change settings to allow for any number to control it.
@learnelectrical3d 2 жыл бұрын
Sometimes controller cannot detect authorized numbers from certain network providers. Try to change the network provider of the authorized number .
@Barraa. 3 жыл бұрын
Where do you get the sim card?
@Learnitstepbystep 3 жыл бұрын
It depends on where you live .. Where you from ?
@Barraa. 3 жыл бұрын
@@Learnitstepbystep australia,melbourne
@Learnitstepbystep 3 жыл бұрын
@@Barraa. Unfortunately you cannot use this device in Australia because 2G is no longer supported.. Please checkout RTU device that have 3G or 4G network support.
@Barraa. 3 жыл бұрын
@@Learnitstepbystep many thanks for your advice
@auspicious113 3 жыл бұрын
why docontinue to move the camera
@szalonypasterz Жыл бұрын
Why is still „password error” no matter which password i choose?!
Learn Electrical in 3D
Рет қаралды 47 М.
Sergio Outdoors
Рет қаралды 40 МЛН
КАНАЛ ВЫГОДНЫХ ПОКУПОК
Рет қаралды 28 М.
Виктор Кравченко
Рет қаралды 185 М.