Rubik's Cube: Learn the Roux Method in 10 Minutes!

Рет қаралды 2,994,480

Күн бұрын

Congrats to Sean Villanueva on his sub-6 official average!
Advanced Roux Tips ► • Rubik's Cube: How to G...
Big 3 Methods Comparison ► • The BEST Speedcubing M...
ZZ Method Tutorial ► • 3x3 ZZ Method Speedsol...
CFOP Method Tutorial ► • Learn How to Solve a R...
Full CMLL ► sites.google.com/view/kianrou...
Cube ► MoYu WeiLong WR M: bit.ly/2Gq7t80
SpeedCubeShop ► bit.ly/2nW3qWg
Using the code "JPERM" supports my channel and also gives you a discount on your order.
Beginner:
2x2 Tutorial ► • Learn How to Solve a 2...
3x3 Tutorial ► • Learn How to Solve a R...
4x4 Tutorial ► • Learn How to Solve a 4...
5x5 Tutorial ► • Learn How to Solve a 5...
Special Tutorials:
3x3 One Handed ► • Rubik's Cube: How To S...
3x3 Blindfolded ► • (v.2) How to Solve the...
Advanced Tutorials:
2x2 ► • How to Get Fast at 2x2
3x3 ► • Beginner + CFOP Method
4x4 ► • How to Get Fast at 4x4
5x5+ ► • How to Get Fast at 5x5...
Facebook ► / jpermcubing
F2L Algs ► bit.ly/bestf2l
Patreon ► / jperm
Merch ► teespring.com/stores/jperm
Special thanks to these generous Patrons:
Soyale, Ayser Ansari, Ivan Marinkovic, someone 1, Jeremy Johnson, QueenSquare1, Sean Evans, Steve Savalle, Derek Worth, Inventor of Loob46, Eisen Vigilia, Jake Brenner, Dawson Wilson, Sesha Sai Patro, Gregory Martin, Kemen Freeman, Michael Mendoza, Ed Connell, Pete Ryland, Jan Strohbeck, KingIceCream, Victor Giaquinto, James Church, Benjamin Force, KuhnDawg, Lake Iverson, Paolo Stay, Isaac Farnsworth, Li Jiang, Letin, Ray Zhang, Hudson, Dakota, James Moore, Csaba Daday, Dmitri Shabes, Voidedifbroken, Rayan Al Hobayb, Mahmoud, stas, Ryan Cramer, Ram Thakkar, kavish, Mirzo, Aidan Gerick, Adrin Esterabadeyan, Bernhard Kofler, Cade Watson, spittingchicken, Miika ogorevc, Namir Smadi, Adam Fenn, Paul Thorley, Amay Saxena, Weisselberger Timothee, Philippe Schwartz, Jonas Rongé, Pontus Uggla, Peter Preston, Takeshi Yanagita, Jane Qiao, Adam Prato, Ricky Robber, The Slick Cuber, Nolan Bastien, Christopher Robin, Sebastian Szafran, Tipa Reimer, ZHU SHENJIE, Fred Strauss, Aaron Spiller, Danny Williams, Rick Lush, Scott Froggatt, Alon Swartz, Chris Cobb, Adam Rosales, Edan Maor, Martijn Schiedon, David Brown, Taco, Mike Sampson, Siege Wolfe, Rob Peters, Miranda Manning

Пікірлер: 2 400

@ikanderson 4 жыл бұрын

This feels like learning how to solve a cube again...

@Mobilizes 4 жыл бұрын

*yes*

@Cuki4a 4 жыл бұрын

Same

@Artistic__ 4 жыл бұрын

But different method

@christiaancroes3329 4 жыл бұрын

But easier i guess

@NavyVEt1995 4 жыл бұрын

Israel andersonHOME Naw its way harder because he’s not even explaining how to do it :/

@RaveRabbit25 4 жыл бұрын

Just came from failing to learn F2L 28 seconds in: well looks like I'm not learning this either

@boro6570 4 жыл бұрын

i learnt F2L from J perm's video :)

@jimothy2361 4 жыл бұрын

F2L is really really freaking hard the first day or two you try to mess around with it. But as soon as you get that breakthrough you’ll have it. Don’t switch methods over this.

@somerandomdude5218 4 жыл бұрын

Yeah F2L will be hard at first but the more you practice the times will come down... I went from solving F2L from 26 seconds to 4 seconds... practice lookahead it actually helps

@taufiqsabila7122 4 жыл бұрын

my son at 10 age done f2l intuitif in 11 second at his best.... 1 month learning... now i suggested him to doing lookahead more patiently...

@damodaramavula2902 4 жыл бұрын

F2l is very easy

@timoconnell5804 7 ай бұрын

dude this is like my calculus class, it seems so simple when the teacher does a problem on the board, then you're lost in the water trying to do it on your own, until you figure out the method to the madness, and man it's so satisfying, I'm still waiting for that click with roux, and I can't wait for it! Thank you so much for the helpful tutorial, J perm!

@LianLOL54 8 ай бұрын

I switched from the beginner method to roux with this video and moved up to a 30-second average. Thank you!

@Yoshnis-TW 7 ай бұрын

so your solve time before learning this is below 30 seconds-

@Scotty-vs4lf 4 ай бұрын

@@LianLOL54 so u went from sub 30 up to 30? lol

@LianLOL54 4 ай бұрын

@@Scotty-vs4lfNo, this was a misunderstanding. My time got better.

@eliaskjrbo8142 3 ай бұрын

@@LianLOL54by how much?

@LianLOL54 3 ай бұрын

@@eliaskjrbo8142 My Time was around 1:00 using the beginner method. Now I use Roux and my average is about 23 seconds. My best time is 18,4 sec btw.

@venomousstriker4715 4 жыл бұрын

*3 days later*: J perm: *How to get sub 10 with roux*

@Aroneam13 4 жыл бұрын

He's already sub 11... Watch his previous video...

@timkw 4 жыл бұрын

@@Aroneam13 yeah, so he can give tips, not like hes going to try to get sub-q10

@Aroneam13 4 жыл бұрын

@I-Urudux kzfaq.info/get/bejne/mtVmg6WBz5O5m3U.html

@Aroneam13 4 жыл бұрын

@I-Urudux i just forgot...

@aro7966 4 жыл бұрын

lol i'd love that

@iz3833 4 жыл бұрын

J perm: roux tutorial Cfop: *peace was never an option*

@mccardrixx5289 4 жыл бұрын

Haha

@SenayudhaS 4 жыл бұрын

Good meme🤣

@nhlvideosforkids1761 4 жыл бұрын

derp turtle lol

@Emanuel-ny7zp 4 жыл бұрын

Buts still cfop is kind of better

@stub2233 4 жыл бұрын

i was doing the roux and half way my cfop instinct kicked in and i did a oll that solved the whole cube

@lemon8944 3 жыл бұрын

0:00 : Introduction 0:15 : First Block 1:41 : Second Block 2:49 : CMLL 5:14 : Edge Orientation 6:25 : L/R Edges 7:09 : Solve the cube! I love your vids

@squadmaster2392 2 жыл бұрын

cfop guy cannot understand this easily

@Krisztiiimerciii 2 ай бұрын

True

@ShanmugamS-sj6ct Ай бұрын

Yes😢😢

@Fatalerror-rl9iz 13 күн бұрын

True

@TheRandomDudes69420 4 күн бұрын

yeah😢

@crispynuggets1580 4 жыл бұрын

I forgot how it felt when I first learnt cfop. I was like 10 or 11 when I did that. (I honestly have no idea how I was so patient when I was younger) So this is how it feels..

@cotcot8965 2 жыл бұрын

this method took me like 1 hour to learn lmao

@Ryanisthere 2 жыл бұрын

@@cotcot8965 i might just learn it because it looks cool

@dogsmile 2 жыл бұрын

Knowing Cfop definitely helps

@krumtle 2 жыл бұрын

@@Ryanisthere bro honestly same

@noelbayna8472 2 жыл бұрын

@@cotcot8965 lucky i have to learn this for a year sometines i got memory loss

@spider-manfan5274 4 жыл бұрын

JPerm: pick one hand for U and the other for M Me learning OH: sweats nervously

@something2b445 3 жыл бұрын

Oh is for cfop

@spider-manfan5274 3 жыл бұрын

@@something2b445 what

@StellaLiu0331 3 жыл бұрын

Oh would be better for roux

@googoogagapeepeepoopoo1783 3 жыл бұрын

@@something2b445 OH is one handed my guy.

@something2b445 3 жыл бұрын

@@googoogagapeepeepoopoo1783 I know

@queequeg00 2 жыл бұрын

As an "old" speedcuber (33), roux has been my main method since I started trying to get faster. I still don't have full CMLL memorized, but manage to get around 22 second average with 2 look. Sean's performance is incredible, and it is awesome to see the method being taken to new heights.

@user-ejpokrmon Жыл бұрын

Kian mansours also good🎉🎉🎉🎉🎉😊

@vintageswiss9096 11 ай бұрын

How are you coming along? 😊 I'm 39 and just finished my first cube last night and I'm hooked lol. Is there still hope for us aging cubers? 😅

@NOONE-kh2hf 11 ай бұрын

@@vintageswiss9096I think so, its all about memorization and practice😅😅😅

@captaincaption 6 ай бұрын

@@vintageswiss9096there's no age when you can't be cubing!

@oleksandrfedoriv Ай бұрын

@@vintageswiss9096how’s it going?

@JTCF 2 жыл бұрын

My interest in solving Rubik's cube started when I found a mirror cube somewhere in my dad'a aliexpress pile. Previously I only had very bad quality cubes that would constantly jam. So I learned how to solve the cube using CFOP and memorized it completely. IT actually felt much easier when the cube had shapes instead of colors, since I can immediately see what's wrong and what belongs where. Now I want to become wven better by learning Roux method... Wish me luck!

@Ajaybhakhar 2 жыл бұрын

good luck John :)

@sz492 2 жыл бұрын

CFOP is way better than roux lol

@sz492 2 жыл бұрын

It has more algorithms and less thinking and plus the best speedcubers use CFOP

@Plant_btw 2 жыл бұрын

@@sz492 i feel like cfop and roux are pretty even lol

@fortisterra 2 жыл бұрын

They are

@JPerm 4 жыл бұрын

This video makes most sense when you have some understanding of F2L (you don't have to be advanced). For beginners, I recommend watching a real beginner Roux video, like one that teaches you how to solve for the first time! Roux vs CFOP vs ZZ Comparison ► kzfaq.info/get/bejne/h7F7a61kr7G7mWg.html

@idkusername2981 4 жыл бұрын

doing Tperm rather than Jperm .....

@Leonardo-cw1dd 4 жыл бұрын

Ilyas Boudelal 😂

@iambarrykatz 4 жыл бұрын

JPerm what's easiest CFOP ROUX ZZ

@void1776-0 4 жыл бұрын

@@iambarrykatz I feel like cfop but I feel like Rue has a Temptation so it's faster in some aspects like TPS

@saraperez4635 4 жыл бұрын

Can you do a Petrus Tutorial?

@arminiriskic7274 4 жыл бұрын

6:07 CONFIRMED THE INVENTOR OF ROUX HAS 2 MUMS

@simpathy.3644 4 жыл бұрын

HOLY MUM

@premiering852 4 жыл бұрын

LMAOOOOOOOOO

@msgbbx1860 4 жыл бұрын

Funny

@andyfengan 4 жыл бұрын

Lol I didn’t notice

@cat9448 4 жыл бұрын

(MUM)2

@hadar2805 3 жыл бұрын

Every single time you insert a pair in a way that would mess up cfop I literally become that one picture of shocked pikachu…. You know which one I’m talking about.

@jake6882 3 жыл бұрын

This clears up so many things for me!! Thank you!

@hunterpetree2124 4 жыл бұрын

It's like you read my mind! Wanted to check it out after seeing that average.

@tristanrujano 4 жыл бұрын

8:56 I used to make and solve that just for fun I didn't know it was an actual algorithm used to solve haha

@bunga9489 3 жыл бұрын

Lol

@nyvidiabread5513 3 жыл бұрын

SAMEEE

@conserztasfia0078 3 жыл бұрын

Samee

@miniyellow6909 3 жыл бұрын

Same lol

@fatimaakamrann 3 жыл бұрын

SAMEEEEE

@TanMinh-bl8ci 3 жыл бұрын

This is actually pretty helpful cuz im the fastest cuber in my class rn so when my friends do race the dont want me in, so im gonna say imma use a more slow method so they can let me in

@atharvaphatak15 3 жыл бұрын

Helpful tutorial. Thank you!👍👍 Do keep making videos. I like your videos and the way you explain.

@kutaytemel 4 жыл бұрын

Sean P. Villeneuva : Gets Sub-6 Average CFOP Users: CFOP was never an option

@kutaytemel 4 жыл бұрын

@JethRubiks awh thanks for the correction :)

@Twitchte 4 жыл бұрын

@@kutaytemel not even gonna fix it ok 😂

@kutaytemel 4 жыл бұрын

@@Twitchte huh

@brendon205 4 жыл бұрын

@@kutaytemel It's still wrong 😂

@kutaytemel 4 жыл бұрын

@@brendon205 oops

@Starshine777 4 жыл бұрын

This method is a trip! It seems like getting those initial blocks is going to be the hardest part, but after that, it's really satisfying

@sathyanarayanabhat75 4 жыл бұрын

I'm so happy that I Learnt this it is so satisfying when you do casual solves with roux

@hashirqazi6502 Жыл бұрын

Love u jperm u really are the best cuber of all time u taught me everything zz(almost),cfop and roux!

@DRTOLLZ 4 жыл бұрын

Yeahhhhhh I’ll be sticking with CFOP

@stan1slav995 4 жыл бұрын

I think on 8:03 (Double Swap) it's better to start with M2 (because you end with U2), otherwise you end with M2 and have a chance to get a DNF by skipping one M move accidentally or overshooting.

@JPerm 4 жыл бұрын

Good point!

@legendarychess440 2 жыл бұрын

Yeah

@hastesun6911 2 жыл бұрын

faxual man

@gochuyt8845 2 жыл бұрын

how do you do edge orientation i don't understand what he is saying

@asadraza9606 Жыл бұрын

@@JPerm is there a tip for learning algorithms faster

@rustyfairmount Жыл бұрын

Thank God you're here! After having set down my cube for over a year, my boss approached me asking if I could teach him Roux. To my surprise, I completely and profoundly forgot both the method, and many of the algorithms of Roux!!! This tutorial got me back on track.

@Jaytheartist850 29 күн бұрын

Your boss?

@satoshinakamoto9597 2 жыл бұрын

J perm , will you make a more basic video on roux method from the beginning to the end including correct way to pair up edges and corner pieces for making blocks. (And how to insert them ). I want to learn. I’ve studied CFOP so much that learning roux seems difficult. Thanks for whatever you can do to help.

@3dprintinglife 4 жыл бұрын

“This is the wrongest one” J Perm, 2019 Thanks for the likes.

@jeremiahsumalbag6693 4 жыл бұрын

3DPrintingLife “wrongest” 😂

@3dprintinglife 4 жыл бұрын

lol.

@jimothy2361 4 жыл бұрын

Jeremiah Sumalbag you could say he was “wrongest” about the correct usage of english superlatives

@Musa12313 4 жыл бұрын

AGREED

@Musa12313 4 жыл бұрын

CFOP is so much better

@kawacube1788 4 жыл бұрын

I started learning some basic concepts of roux yesterday and am really happy to find this video today. It was understandable for me! Thanks for this video.

@aaronnorris192 4 жыл бұрын

thank you for this amazing tutorial love your vids

@xelaolapid4763 3 жыл бұрын

Most people would disagree with me with this.. But roux Is undoubtedly the best speedcubing method. I’ve been cubing for a year, and for 7 months I’ve been using beginners Method. Then I wanted to learn an advanced method for 3x3. To make a rough estimate, 4 out of 5 people first try Cfop. Also me, and I realized that it was really hard to understand. Intuitive F2L was hard to understand, then OLL had 10 algorithms (which seemed a lot at the time) and pll had 6 algorithms (which was fine) but the thing is, if I want to improve I could use algorithmic F2L and try it out. Then 57 OLL ALGORITHMS! that’s a pretty high number, it’s not hard to memorise all, but it’s the recognition that is really hard. And then there are 21 PLL algorithms, but 1/5 of them are Gperms, which are a nightmare to memorise, Let’s not even talk about V perms, N perms Are 20 moves, which kind of ruins the move count. F perms Aren’t short also. I think they are about 20. Moves too, meaning that moves for cfop can be 55-60 but maybe a bit more. There are 494 Zbll algorithms, that’s kinda ridiculous, but what about the 3915 1LLL algorithms. In roux, making the First and second block is very easy, then making all the corners oriented (CMLL) Can be done with just Cll, a method on 2x2, or Ortega (also a method on 2x2.) LSE is where people get stuck, but it isn’t hard. You need to get to a point where you have 3 bad edges at the top, and 1 at the bottom. Then Do 1 of 2 algorithms, which are both 3 moves long. Solving the L/R edges is easy. Get both of the edges on the bottom face, then intuitively solve them, which is very easy. It has less move count. Also, kian mansour got a OH WR average with roux, and Sean Villanueva got the 3rd sub 6 average. I want to try out roux. When I started CFop, I was getting 1 minute 50 second solves, to 2 minute and 20 second solves, but with roux, the slowest I got was 2 minutes, and fastest was 38 seconds. I only started roux yesterday. I average 34 seconds btw. With CFOP

@nathanaelmorgan8604 4 жыл бұрын

Very impressed with this tutorial, the examples you showed were fairly efficient, and hopefully this gets more people to try out Roux. I absolutely think it is worth it to give it a go for a month or two, even if you don't end up switching. Thanks, Dylan!

@JustAHarmlessCat 10 ай бұрын

You fr commenting on a 3 year old comment

@CillyBilly563 10 ай бұрын

@@JustAHarmlessCat so r u

@JustAHarmlessCat 10 ай бұрын

@@CillyBilly563 :)

@EM-nl6sg 4 жыл бұрын

Dots is typically done with the E2 thing you explained, however there are ways to predict and skip it but they are kind of advanced (typically seen while doing the left and right edges)

@shiv3rcubesolver664 2 жыл бұрын

re: what roux solvers do for dots for the case where you just have the centers, most people will try to skip it, but if you are left with it the E2 alg is better. for the one where you just have edges, people will just cancel the AUF into (U2) then the double vertical swap alg, so it'd be (U2) M' U2 M2 U2 M' (U2)

@therealmrj1 2 жыл бұрын

dude this is some fucken 2012 youtube shit

@dougblauvelt3945 2 жыл бұрын

I love watching your videos you are also the one who taught me how to solve a Rubik’s cube.

@sudipachakravarty2332 4 жыл бұрын

Being a CFOP user, this thing is extremely intuitive and easy! I might even shift to Roux method. But, all credits to Dylan cause I tried learning from Kian Mansour, and I'm not saying his channel's bad, but I didn't understand the way Kian taught. Anyway, great video, and keep it up man. (p.s. Also, what happened to your Patreon thing: you stopped writing blogs last year)

@JPerm 4 жыл бұрын

Glad you've learned it :) sometimes different teaching styles work for different people. Also just added one now on patreon! I sometimes put Patreon on low priority when I lack time (since the whole point of it is to help the channel, and it should never take away too much time).

@sudipachakravarty2332 4 жыл бұрын

@@JPerm glad to know that you're still doing it! you are still my favorite KZfaqr and cuber!!!

@cubeified 2 жыл бұрын

well thats good you understand it, i mean i get it but its really hard not to do cfop algs

@calibratheband 2 жыл бұрын

Yes I agree perfectly. I thought roux would be super hard, and it was when watching other dudes' tutorials, and they wouldn't even walk you through.

@calibratheband 2 жыл бұрын

@@cubeified It is so hard not to just bust out a z perm

@miles6885 4 жыл бұрын

For beginner CMLL, a lot of Ortega 2x2 algorithms work for yellow corners.

@danielalbay3752 3 жыл бұрын

Its like a new solving cube again THANKYOU for you videos bro beacause of you im going faster and faster

@land9271 3 жыл бұрын

Its really refreshing to learn a new method stick to it for a few days then go back to cfop

@ripstott 4 жыл бұрын

Good guide! I'm 2 days into Roux from beginners method. I am aweful at algorithms, but I picked up a better understanding of some of the LSE cases from this - 3 swap especially. My only struggle is permuations now, but I got tje J-perm down, so at least I'm able to solve it from memory.

@rauanbeijo3493 4 жыл бұрын

I think you did a really good job. You showed an easy way to start with roux, not only in this video, but the older one too. I started with roux after watch your other first video about it, because I really got interest. I think you are on the right way

@silliestemy 2 жыл бұрын

This video genuinely made me come back to cubing like a year ago Now i don't really cube as much but ty

@KAIJUKING123 2 жыл бұрын

Oh god this is gonna take a bit to learn this

@lemonman991 4 жыл бұрын

Your tutorials and amazing Jperms. Your my favourite yt cuber besides Feliks Zemdegs... I just gotta say all of these to tutorials are great, despite not understanding some of the info, I try to at least pick out some of the points. You have brought me to become sub-20 in under a year... I really just wanna meet you face to face and tell you... Thank you!

@dwag8869 4 жыл бұрын

J perm your the best! I learned all methods and everything about cubing from you. Thank you so much man

@infinity_ytsketchy5526 2 жыл бұрын

I loved the tutorial! It is just great!

@cupcakebesideyou 2 жыл бұрын

thx for the tutorial dylan really helpful

@raganm.i.x4155 4 жыл бұрын

Finally i was waiting for this tutorial since the last roux video

@PhoenixLim 4 жыл бұрын

Good thing i started trying this 2 months ago!

@nhungdinhthi36 4 жыл бұрын

This method looks so amazing

@Megoover Жыл бұрын

I stuck in a loop on EO step. Going from 4 to 2 to 4 to 6 to 4 to 2... I really cant get past that. I scrambled my cube, solved via CFOP so it's ok. Scrambled again, tried Roux and the same thing. I cant get past EO P.S. After many tries i got out of the loop, but now blue and green pieces are in different, so next step wont work. Nice P.S.S. Ok, i did something that fixed it. Now I only need to understand what I did

@theGreatCommenterofYoutube Жыл бұрын

lol, at least u got that far, im stuck st what im even supposed to do after CMLL, i always feel im missing an alg… edit: nvm im also stuck on EO lol

@Megoover Жыл бұрын

@@theGreatCommenterofKZfaq i got that you need also to look at side pieces, not only to ones. And it defies from which orientation you should start the algorithm

@theGreatCommenterofYoutube Жыл бұрын

@@Megoover Yes i also figured it out! I even solved it!

@DillPicklePatrick Жыл бұрын

If you have 2 edges: (1 on top, and 1 on bottom:) put the 2 edges in the same slice (both in M slice, ) but not right over eachother. (If bad edge on bottom is in front; bad edge on top should be on back, and vice versa) once here do M’ U/U’ M/M’. If the bad edge in the bottom is at the back though, start with an M followed by U/U’ M/M’ this will leave you with 3 bad on top, and 1 bad on the bottom, which is the “arrow”. From here refer to what the video shows.

@MyEddyk Жыл бұрын

I also faced that problem but some of the cases you'll have to refer to the algs J-perm gave and some you can use observation. For instance, M' U*(in any direction) M*(in any direction) always flips the UF,UR and UL(upper front, upper right and upper left edges) so with this knowledge you can easily solve all 2 bad edges cases on your own. As for the rest you can refer to the video.

@awcuber9883 4 жыл бұрын

9:04 Can also do (M’ U M’ U’)three times

@Coolms9 4 жыл бұрын

AW cuber but no

@ball721 4 жыл бұрын

alg for headlight 3:38 alg for no hl 3:49 set up edges 6:11

@xAntisune 3 жыл бұрын

I've learned Roux now! Thanks J Perm!

@flxdg5989 3 жыл бұрын

yo, yesterday i had the idea to learn roux and today i did it in barely 10 minutes, thanks a lot dude

@tripurwanti9946 4 жыл бұрын

"Roux tutorial" Roblox players: *USSR ANTHEM START*

@mrchickenmc5360 3 жыл бұрын

@makatarkhnishvili8228 3 жыл бұрын

rebex

@dinosharttt 3 жыл бұрын

Roblox is stupid

@zapthebird8141 3 жыл бұрын

@@dinosharttt Bro then explain your pfp

@dinosharttt 3 жыл бұрын

@@zapthebird8141 my friend made me that years ago

@kimochiiaov5584 4 жыл бұрын

0:05 Sean “sub 6 roux, piece of cake😒” The girl to the left “OMGGG!!!!!!!!!”

@dvorak826 3 жыл бұрын

vtc asher yt woah, never heard of vietnam?

@sanchit6107 Жыл бұрын

22 Sep 2022 20:21pm. i hereby announce that I have now understood every concept of Roux Method. Thanks Jperm and all cubers who helped me ☺

@pedrosoares9470 2 жыл бұрын

That was fun to learn!

@weebyes2951 4 жыл бұрын

learn roux in 10 mins! me : takes litteraly 2 months to do it

@mccardrixx5289 4 жыл бұрын

*Philipp Weyer is very close to an official sub 6 average!*

@thijsbeentjes4008 4 жыл бұрын

You mean his 6.06 average from 2018?

@mccardrixx5289 4 жыл бұрын

@@thijsbeentjes4008 Yes! ER average.

@thijsbeentjes4008 4 жыл бұрын

@@mccardrixx5289 that was like over 10 months ago, why mention it now?

@mccardrixx5289 4 жыл бұрын

@@thijsbeentjes4008 J perm once said,that Philipp will be the third person in the world to get an official sub6 average!

@MasterM710 2 жыл бұрын

This really helped me

@crift3vil731 3 жыл бұрын

I'm planning to switch to roux I avg 50 in cfop what do you suggest

@4ng3il4 4 жыл бұрын

For me, I feel like knowing the scramble would help more

@ej22_gc86 4 жыл бұрын

me as a beginner at cfop: mind blown Those first 2 blocks are really cool to do!

@therafer3581 2 жыл бұрын

Hey man, u still cube?

@limeedhot Жыл бұрын

@@therafer3581 i wonder if they still cube

@therafer3581 Жыл бұрын

@@limeedhot fr

@alllivesdomatter2954 2 жыл бұрын

This tutorial is giving me nostalgia for learning something new.

@iheartmiketython2596 Жыл бұрын

If you know the Ortega method, just pair up the edges with random corners for the block, then have the corners of the first layer scrambled, but then just move put to the top layer, do 2x2 Oll and then pbl, and then you don’t need to find corner edge pairs, you can just pair up any corner with any edge, then do pbl. Sorry if this wasn’t clear to read

@GHOST-vu6ux 4 жыл бұрын

2:20 move it so smoothly

@Peepz 4 жыл бұрын

I WAS SO HAPPY WHEN I FINALLY DID IT IT TOOK LIKE AN HOUR BUT IM HAPPY I LEARNED ROUX

@albertschinderman 3 жыл бұрын

I solved one in like 30 mins but i couldnt get it the next time lol

@speedypopoff 3 жыл бұрын

Im stuck on eo and i dont know what im doing wrong :(

@xAntisune 2 жыл бұрын

@@speedypopoff watch the video you clicked on, its very clear

@sera9141 3 жыл бұрын

it's very hard to me, fast but it's hard to learn this HELP

@sera9141 3 жыл бұрын

lol

@kerry041 Жыл бұрын

Thanks a lot, i finally learned how to use the roux method to solve a cube 😄

@oli_wh 4 жыл бұрын

So , I can solve the cube decent but I have , let's face it a trash cube. It barely turns , usually gets plain jammed etc. Idek what brand it is. Looking for recommendations for a decent speedcube so I can learn roux? Thanks

@neptwo9563 4 жыл бұрын

if you didn’t buy one yet i’d also like to recommend, no offense to the other commentor but i have the yuxin little magic and for me qiyi warrior w is way better than a little magic, assuming you’re looking for budget cubes since you said a “decent” speedcube, but if money isn’t a problem i’d recommend a moyu weilong wr m (around 40$) or if you’re willing to spend more than that the gan 356 x (70$) which is the best i own right now

@oli_wh 4 жыл бұрын

Thanks both very helpful

@HarshSharma-xu6oz 4 жыл бұрын

i remember when i just started cubing i used to call roux 'rux'

@ImGonnaShitYourPants 3 жыл бұрын

I pronounced it roucks lmao

@cyubin3199 2 жыл бұрын

I pronounced it rooz lol cuz i thought the x has that pronouciation

@cheeseburger5716 2 жыл бұрын

I thought it was it was pronounced r- Oooo-x. Not roo lol

@cubersquad 3 жыл бұрын

And I just completed my 1st solve with this method!

@rm.makes.me.smile_ 2 жыл бұрын

An addition to my bucket list is one day being able to watch one of these videos and actually understand what he’s saying

@kingchicken7085 4 жыл бұрын

3.35 alternative algorithm is (hold the headlight on the front if you dont have a headlight do this algorithm and you will have one) R B' R F2 R' B R F2 R2

@alkismamasioulas6916 4 жыл бұрын

When jperm uploads Yay! When you realize its roux tutorial and you are a cfop solver😥😥😥

@noorhanalizamohtar8533 4 жыл бұрын

Try learning multiple methods, this will help you solve scrambles that is not good for CFOP but good for Roux.

@ezrajonathan4380 4 жыл бұрын

There is even a video for CFOP solvers learn roux

@me-specifically 2 жыл бұрын

Tips for beginner roux solvers (I know this is a beginner tutorial but I think it’s good to know these in the beginning) 4:33 I usually use pinkies for stabilizing the cube 5:38 use the any u or m to put lr edges in their right spots or at least just put one lr edge For first block you can make green and green-orange center, and green-white green-white-orange pair and insert horizontally

@POKEMONSTER1233 Жыл бұрын

Thanks

@redjusticegamer1975 3 жыл бұрын

this method is so much better for new cubers. Trying to get fast

@Bocsaphoto 4 жыл бұрын

Hi j perm I need help with the last step (three cycle) : So sometimes two edges would be come out flipped (making an H-looking pattern, or the edges are completely opposite from each other). Does anyone know what to do here? I'm stuck when I get to these flipped edges. Thanks

@Aye_Gee 2 жыл бұрын

same thing happens tome

@FinleyR234 Жыл бұрын

This means you need to orient the edges to face the right colour

@theperson1112 4 жыл бұрын

I’m trying to learn but am getting stuck on CMLL I don’t know cfop and the OLLS arnt working for me. I need some help

@lazaarwason354 Жыл бұрын

this is soooooooooooooooo easy! thx jperm!!!! may u get 1000million subs

@AP_cuber11 Жыл бұрын

Dylan, i am a cfop solver and when i tried roux it was really hard but with practice i learned it, i have worse time with roux, but i am sure that when i watch your second video "advanced roux", my time will get better, btw you're great teacher.

@p.vfaisal2210 4 жыл бұрын

It's also noticeable that there is no dislike even though it has been 5 minutes

@thaiisfood 4 жыл бұрын

1:08 : “So we could just rotate and move on” 2:22 : “But in roux we never rotate” So do we rotate or not?

@Sphere422 3 жыл бұрын

Well yes, but no

@Sphere422 3 жыл бұрын

You can rotate it without rotating it tho

@notredboi 2 ай бұрын

After watching this 3 days not only did i solve it but At some points i tried to correct a mistake and made progress instead of messing everything up, so thats neat

@pauls.2532 Жыл бұрын

As someone who is currently at a 1:15 with the beginner method I can say, that is exactly how hard I imagined solving a Rubik's cube at all

@anthonyjade1461 4 жыл бұрын

6:13 for the 3 mover cases

@Ph4ntomlol 2 жыл бұрын

Hey JPerm, I learned beginner cfop a couple weeks ago and I am doing pretty well. Was trying to learn roux and had some trouble understanding some things, especially when it comes to perms since I still am on beginner cfop. It would be nice if you made a video with a more beginner aprouch if it would make sense

@katerina.halikova Жыл бұрын

Try to watch Kian Mansour's tutorial. It's way better and even a beginner should understand.

@polish-american Ай бұрын

the fact that cfop feels 100x easier is wild considering this is actually easier with less alga

@dogsmile 2 жыл бұрын

I was using this method for the first time today and everything solved except the edges that were a Ua perm. If I am speed solving would it be better to do the Ua perm or to keep solving with Roux. Any person’s answers are welcome.