Ty!

They can be hit or miss that's for sure

Thanks for watching

The chamber flag/mag block came from JKL Precision. Its listed under the 10/22 accessories. The barrel (and other mods) does put it in the Open class. I'll try to track down some target pictures but the winner of the 10 or so brands I tested at 100 yards was SK Rifle Match.

Hollow piece of 1 inch aluminum tubing. Thanks for watching

I wanted to move to something in the Remington 700 platform

Mine could use a very thin shim as the bolt is very difficult to close since the barrel swap

Wiebad

Trigger is probably the best option

Yes, could have gone longer. From my research, there wasn't much go gain going longer and shooting standard velocity ammo.

@@darrondb Thanks I didn't have a big choice

20 inch is the sweet spot with standard velocity ammo. Any shorter or longer and you lose velocity. I sacrifice velocity for better harmonics with a 24" heavy barrel. For me I found that this make the barrel except a wider variety of ammunition. This works for me and find the 24" heavy barrel isn't picky with ammunition. I believe harmonics plays more of a role in rimfire when choosing ammunition then chambering. Both are important but for me it's nice to shot any match ammunition with all great results. Of course you still get what you pay for in ammo. One example is lapua center x and SK standard plus group the same at 50 yards and no noticeable difference tell you go over 80 yards. After 80 yards center x is tighter .SK STANDARD is 1/3 the price. Very little difference between any match ammo in 50-70 degree temperature. Cold weather or hot weather Also will separate the different match ammo. HAPPY PLINKING!

Sure! With 50yd zero: 150yd +14 200yd +23.25 250yd +33 300yd +44.5

@@darrondb What? Seriously? I had no idea I could get that kind of performance out of this setup. What kind of groupings are you getting at 300 yards?

300 yards was stretching it, but not too difficult to have hits on a 12 inch plate. Wind makes things really hard

@@darrondb Most of my bulk ammo is 40gr 1255 FPS. Your cheat sheet will help get me on paper faster. Thanks for the valuable info.

@@YouStupidBunny the DOPE above was for SK Rifle Match at 1080 fps

I made a very tiny notch with a razor to accommodate the safety stop on the right side. 5 seconds of work and then it bolts right up.

Greetings! If I recall, I just got the one for the regular RPR and it worked fine

I used ar height since that is what I had on hand. Lower would be nicer

If you are able to shoot steel targets, its an absolute blast. I'm not into paper targets too much but steel is awesome

@@darrondb thanks for the reply.

Greetings! The card is a ID card blank (www.amazon.com/Premium-Printers-Graphic-Quality-Magicard/dp/B07Q12KGK7/ref=sr_1_7?dchild=1&keywords=blank+id+card&qid=1587573366&sr=8-7) with some Velcro on the back that I write my dope on with a sharpie before each match/stage. I clean them with rubbing alcohol and reuse them. The holder is a scrap piece of kydex and Velcro molded around a gear tie (www.amazon.com/Nite-Ize-Gear-Tie-Assorted/dp/B01MXU05IM?th=1). I can write out all my dope ahead of time and swap out cards between stages.This isn't my original design, I copied if from a couple of others I saw on the internet and at matches.

On mine I needed to make a very very small notch in the grip plastic where the safety selector diamond is. A tiny cut with a razor blade

@@darrondb ok great Thxs I’ve wanted to put a vertical grip on my rpr and didn’t know if one was even available. Thxs again Sean. And btw great videos. Thxs

Another great option is the Anarchy Outdoors Penguin. I would have probably gone that way instead of the mpa if it was available then

@@darrondb lol I have the tuxedo on it now but just wanted to try something more vertical. It seems fine just not as vertical

Barrel came directly from Shaw

@@darrondb Hi thank you for your awnser, can you give me the email of Shaw please?

@@gilbertmartin6170 just Google search for Shaw Custom Barrels

@@darrondb Hi thanks you for all info

Yes, the MPA fits with no modifications

Thanks

Mine was pretty stiff for a while but smoothed out

@@darrondb Thank you sir! The forward to back motion is like butter, but actually pushing the handle down into the lock position is incredibly stiff and there is a loud audible 'click' every time its pressed into place. it feels like I'm snapping a spring or getting caught on something each time. There is zero hope of holding a zero through a scope while pushing down that hard to get the next round into battery. I guess I'll just work at it and see if it smooths out.

The stiffness is normal, the click is unusual. Have you disassembled your bolt to make sure everything is where it should be? Sounds like maybe the extractor or ejector is hanging up on something

@@darrondb I'll be doing that this weekend. I would be surprised if ruger intended it to work this way. Just looked up a video on the disassembly of the bolt. Looks very straight forward.

Unfortunately I'm not aware of a folding option for the RPRR

@@darrondb Wow. You are a real person)) Thought these were just ads))

Lol!!! Yep! A real dude!!

@@darrondb Cool Mr.Darron D b. My Mate and I went to our first ever shooting competition with my new RPR 22 expecting to win. We returned very dis-heartened. Man the real competitors were so good. It is the kind of sport that must be started early in life)) Nice vid. Respect.. J.

Don't get discouraged!!! I shot the RPRR for a full year and learned a lot!!

Mostly SK Rifle Match

@@darrondb Red? Yellow?

Red box

No. The Bergara is a better fit for me

SK Rifle Match (red box)

@@darrondb Yeah they do seem to run well in mine too The Eley Standard in the 500 round box work well for me as well thanks

No, I sold it to a friend to fund other rifles.

Thanks for the input! For what it's worth, this was years ago and my equipment has gotten a little better since. Thanks for watching!!

Thanks Russell! Like most folks, I'm working with what I have :)

Santa heard you! All new videos recorded with a microphone. Thanks for watching!!

Thanks

Thanks for watching! It all depends on the match. Many will accept the magazine blocks if you demonstrate an empty chamber first. But agree, you can still have a round hidden in there if you're not careful