Rust Removal - Top 5 Tips & Tricks for Removing Rust With Evapo-Rust

Рет қаралды 64,226

Күн бұрын

Click for more: dsportmag.com/social/
Buy Evaporust on Amazon: amzn.to/3rRehAF
We tested some home-made remedies along with rust removing products aimed at automotive enthusiasts a while back, and one of the products that had great results is "Evapo-Rust" (Evapo-rust.com)
dsportmag.com/the-tech/surfac...
We wanted to take it a step further and see if we can make it remove rust even better and quicker, so we tested a few methods and came up with a few tips and tricks anyone who uses Evapo-Rust or have rust issues can utilize.
Here are the Top 5 Tips and Tricks when using Evapo-Rust
0:52 Tip 1: Bring On The Heat
1:15 Tip 2: Turn Up The Sound
3:57 Tip 3: Rustblock
5:31 Tip 4: Time To Gel
6:29 Tip 5: Don't Frown If It's Brown
We want to hear from you.
What do you want to see next?
Comment below or on social media
dsport
dsportmagazine
dsport

Пікірлер: 90

@Sandman2879 Жыл бұрын

Pour it through coffee or paint filters to get the crud out of it after you use it. It'll last longer and won't have all that in it. You'll be surprised how much stuff piles up in the filter. Go slow because it'll clog the filter and come through slow.

@davidfuller764 Жыл бұрын

Thanks, that makes good sense to get the crud out. otherwise evaporust will continue breaking down the big chunks of crud, maybe?

@balisticsquirel 2 жыл бұрын

Amongst so many junk videos out there, it's refreshing to find good solid knowledge like this. Thank you.

@fflife6730 4 ай бұрын

Pour Evaporust through a coffee filter after use to remove excess sediments. Always always always expect to brush item with a wire brush or wheel after treatment.

@davidjennings8758 2 жыл бұрын

Realy great analysis. Nobody else mentioned the gel. The gel is exactily what I need for my project. Thank you so very much.

@KingGJT 3 жыл бұрын

Super nice video! I just ordered it and your tips really help! Thnx for sharing :)

@sglenn6 3 жыл бұрын

Outstanding Video! Need to use this on my BMX bikes. Thanks for this professional video.

@JohnMiller-oz7gv 2 жыл бұрын

This is the best video I seen on this product. Nice work.

@olaf3613 3 ай бұрын

Thanks for the heads up on the paper towels and plastic wrap! I have a old motor cycle with a lot of rusty chrome. This trick should work great! Thanks again, keep up the good work

@readchp 2 жыл бұрын

Really well done. Thank you.

@league6767 2 жыл бұрын

Very informative video! Thank you so much!!

@curtpratt2203 Жыл бұрын

Thanks for an informed comparison of ways to use Vapo Rust

@charlesgillette2925 Жыл бұрын

Excellent review.

@jt9498 Жыл бұрын

I'm a big fan of Evapo-Rust. Use it all the time, even though it's pretty expensive up here in Canada. $100 for a 5 gal. pail! I buy it by the 4 L jug ($35).

@rubennavegante3491 2 жыл бұрын

Thanks for the video

@ashleyharvey14 4 жыл бұрын

Great video!

@dsport 4 жыл бұрын

Thank you.

@SpentzosDino 2 жыл бұрын

Thankyou for this video. I had good luck using vinegar in an old crockpot but it took awhile. I will now be replacing the vinegar with Evapo-Rust, Thanks.

@reallyoldsubdude387 5 ай бұрын

Now that is a good idea for an old crockpot!!

@R2_D3 2 жыл бұрын

@6:10 Better to use some old sheets or dishtowel instead of paper towels, it is sturdier and ''traps'' the rust and dirt better. (used that trick a lot with cleaning vinegar, I'd just put it in an old plant sprayer and keep it moist, works like a charm! Or if it's not too big, wrap it with cling film)

@james66872 Жыл бұрын

Good looking out

@stevegreen1711 4 ай бұрын

Great video.

@xianzhang5089 Жыл бұрын

Great video!!....the evapo rust gel was the tiip that will really help me!!😂

@bobclark9080 Ай бұрын

DSPORT, Have you tried spraying it onto a rusty body panel or inside a frame rail by using a sump pump, garden hose, kiddie pool, and spray nozzle? Heating it could be done with a engine block heater pump from Tractor Supply that heats it up to 135 degrees. That's how they restored the 1957 Plymouth time capsule from Tulsa Oklahoma, but I don't think Ultra One Rust Remover company used a heat pad or engine block heater to heat it up.

@rickswanberg4995 Жыл бұрын

You could use Ophospho as a second treatment to convert the rust to an inert surface following the Evapo-Rust.

@tautahihati5476 Жыл бұрын

Chur mean bro like it... best demo

@joedoe4642 3 жыл бұрын

Great video, very informative. Learned something new

@TheCuriousOrbs 3 жыл бұрын

Wow, heat definitely looks like the way to go. Maybe using a small vented lid so it doesn't build up pressure, but does slow evaporation.

@jasonboudreaux5003 2 жыл бұрын

I was wondering if the pressure would Help

@davidfuller764 Жыл бұрын

“Use distilled water to replace evaporation“ if I heard correctly at end of video.

@eukaliptal 3 жыл бұрын

great video, thanks for sharing Have you tried using a filter to clean the used solution? Don't frown when it goes brown do filter before you dismiss-to?? I'm a maker, not a rapper... give me a break lol

@jevansingh3706 3 жыл бұрын

Firstly, great video! if you use the evapo-rust gel and decide to keep it on the metal for a day or two would I need to wrap/ cover the item? would you say the gel works more effective than the liquid form ?

@minirallygt4071 10 ай бұрын

thats impressive what do you recommend for cleaning alloy like carbs in a ultra sonic cleaner?

@EricPement 2 жыл бұрын

What do you recommend to put on hand tools after using Evapo-Rust, or other objects that will not be painted?

@GusMahn 2 жыл бұрын

Good video. Any thoughts on using a pump, a spray nozzle, and a plastic sheet to de-rust the bottom of a car?

@ct71rr20 Жыл бұрын

I did it with Rust911, except I used a plastic bin, sump pump and sprinkler head. Tented the whole thing in plastic and let it run for about 16 hours. Worked great!

@bryancunningham1095 9 ай бұрын

I was wondering if you use heat to speed up the reaction does this reduce its rust removal capacity which is around 1/2 pound of rust per gallon, also does this effect the shelf life or cause it to have shorter useful life, or cause it to polymerize quicker indicating the end of its usefulness.

@tonyversus9787 Жыл бұрын

Stupid question, would evaporust be a good product for a parts washer tub? Hard clean the parts in my slop sink then transport to the parts cleaner to let them soak and final scrub off the existing rust? I have the 20g harbor freight parts washer

@404SRT 3 жыл бұрын

Could you use this for electrolysis ?

@bryonbaker5349 2 жыл бұрын

I have a blazer 4.3 that I borrowed to somebody and they wrecked a few things and didnt replace them. I almost died and the state is currently working on getting me disability so money is an issue. The vehicle has some rust in the cylinders now and I was wondering if I could poor this in the cylinders and rinse them out and spray wd 40 or oil in there and crank it over. Or maybe vinegar but I heard it will destroy the aluminum pistons. This is my only vehicle as I my other vehicle I borrowed to someone and they put a whole in the oil pan and kept driving it until they blew the motor up and also didn't give me any money for doing it. Any help on this would be greatly appreciated as I'm in a bit of a tight spot because of all of this. Thanks

@jludtxs 3 жыл бұрын

does the gel come in any size bigger than 8oz? doesn't seem like that would go very far

@dgmenace73 2 жыл бұрын

Question: can this be used in cylinders to break rusted rings? If so, what do you recommend to mix this with to prevent it from slipping on by too fast in the cylinder? Thanks for the video! I have tried this and it works great on tools!

@richgendron9999 3 жыл бұрын

Can I use it on my car as a iron remover

@justinnorton4308 5 ай бұрын

Also looks like the room temp fluid got dirty faster than the one that was heated!

@odu2k Жыл бұрын

A+++ 🍺🍺

@Mekchanoid 3 жыл бұрын

Really useful video. Could you recommend a degreaser to use before Evapo-Rust?

@billygoatracer 2 жыл бұрын

I like simple green cleaner, it's safe and works good

@Mekchanoid 2 жыл бұрын

@@billygoatracerThanks for the answer. I used a kerosene-heavy degreaser before and it stank out my workspace!

@elizabethhenderson3747 Жыл бұрын

Why is there no link for Rust-Block Spray of which you are promoting??

@VincentComet 5 ай бұрын

Can you use rust block inside a motorcycle petrol tank

@trevoradams8675 6 ай бұрын

I found that evaporust which works great will darken high carbon steels.

@johnhall8455 Ай бұрын

The problem I have found with it is that it leaves a black coating, which is easily removed with a wire brush, but that kind of defeats the object… Has anyone found a way of removing the coating without brushing?

@rosshemming1347 2 жыл бұрын

How about tow chains

@jackmacdonald4867 7 ай бұрын

What can be done if you are not able to soak the part

@AerialLensVideo 2 жыл бұрын

Thanks for the video - but I cannot find the Rust-Block product you show here. Is there a paintable alternative inexpensive spray? By that, I mean is there a quick spray coating to prevent flash rust (after using water to clean off the evapo-rust and then drying of course) that can be painted when dry?

@dalelarson7005 Жыл бұрын

You might try using Penetrol to prevent the flash rust. I used it on an antique blacksmith vise I restored and it worked great to prevent rust. And supposedly you can paint right over the cured Penetrol.

@rgruenhaus 2 жыл бұрын

I have the gel so I can't heat it and putting it on the front of my fridge certainly can't be done anything like what you talk about here!

@bobwhelk2117 2 жыл бұрын

Wondering if heating evaporust puts off dangerous fumes?

@davidfuller764 Жыл бұрын

Good Question. Curious

@David-hm9ic 10 ай бұрын

There's nothing toxic in Evapo-Rust.

@bobwhelk2117 10 ай бұрын

@@David-hm9ic so you must put it in your smoothies?

@John-gm8ty 2 жыл бұрын

a little hard with big parts heh

@4dirt2racer0 3 жыл бұрын

"box stock"?? thats square tube brother :p

@zappolo85 4 жыл бұрын

Its 140 °C or °F?

@JML1987 3 жыл бұрын

It's boiling point is close to water, so 140 F or ~60 C.

@bradleypease2492 Жыл бұрын

@@JML1987 that’s no where near boiling Temp

@David-hm9ic 10 ай бұрын

@@bradleypease2492 JML1987 is saying that the boiling point of Evapo-Rust is close to the boiling point of water; i.e. 212° F. The 140° reference is definitely Fahrenheit.

@bradleypease2492 10 ай бұрын

@@David-hm9ic Even if he is saying that you just proved his temp was no where near to the boiling temp of water - what’s ur point

@4dirt2racer0 3 жыл бұрын

thats cool its so inert with most things, shit my municipality would probably love for me to pour my drums down the drain n get rid of a little rust this shit really is amazing i cant believe its not twice the price it is.. i could see california requiring u to hire some cleanup company to come out n dispose of it, if ur even allowed to have it there.. they make it seem like such a pretentious egotistical place

@paulbillings1791 2 жыл бұрын

In the state of Cancer,Evapo-rust is known to cause California.

@-Gunnarsson- 3 жыл бұрын

I hate that all products seems need to be rinsed with water. Thats flashrust always.

@davidfuller764 Жыл бұрын

Dang! Good point

@reallyoldsubdude387 5 ай бұрын

He said to get off your ass and use something to stop that, say . . . Rust Block for example . . . from happening. That means that you need to use the 7 Ps before you start. Oh darn, that means that you would have to use your brain and think ahead.

@UKcomedyfan28 3 жыл бұрын

For the half an hour heated test: how could it look "better than when it was new" if it shouldn't have had any rust when it is new?

@dandare1001 3 ай бұрын

Don't frown if it's brown! That's what I kept telling my girlfriend.

@v52gc 3 жыл бұрын

Got to the gel bit, “Tip 4”, wait, what, I got the tip to heat it up, but not much else... gel isn’t a tip, it’s basically saying to use another product...

@rgruenhaus 2 жыл бұрын

Little to nothing with your coverage of the gel!

@rajanjhaveri3995 Жыл бұрын

Please use gloves while handling chemicals and materials heated or dipped in any chemicals.

@MrSprocket2u 3 жыл бұрын

yeah ...lol , looks at your rust parts ..... parts rust a different rates ... as metal compounds are not all the same

@greggminkoff6733 8 ай бұрын

There is no such thing as box stock. It is called square tubing. Nobody wants to quicken the time. I'm sure what you mean is to lessen the time or reduce the time. If you can't speak correctly you have no business making a video using the English language to explain what you are doing. Take the time to think about what you're saying. Make up cue cards and read off of them when making a video. That's what people on television and formal speakers do.

@reallyoldsubdude387 5 ай бұрын

Sure, everyone in the country uses the same vernacular as everyone else don't they? Ya trolling pervert.

@lorrainewilliams7896 3 жыл бұрын

1:46 calling your audience "guys" is lazy and disrespectful to women. Not a good way to get new subscribers.

@paulbillings1791 2 жыл бұрын

Pretty common for women to address a mixed group of people as,Guys. It isn't really gender specific,unless you force yourself to be that narrow minded.

@dsmasynergy 2 жыл бұрын

Dont feed the troll

@Sandro_Southpaw Жыл бұрын

Because Women never ever use the term “Guys”🤷‍♂️🤷‍♂️

@David-hm9ic 10 ай бұрын

I'm not always particularly politically correct on such subjects but if a server in a restaurant wants to kill their tip, including my very obviously female wife as "guys" will tank the tip.

@reallyoldsubdude387 5 ай бұрын

Yeah, he can see your wife out there watching the video all right. @@David-hm9ic

@David-hm9ic 10 ай бұрын

Thanks! I use Evapo-Rust and I have an ultrasonic cleaner. Why haven't I used them together before? Faceslap. TIp: Fill the US cleaner with water, put the parts to be cleaned in a zipper freezer bag with a little of the cleaning solution. Last year I did just that when rebuilding a bunch of valuable model airplane engines and it worked great. No worry for loss of irreplaceable parts, either.

@bobwiley6221 25 күн бұрын

You can you can also Place Parts in a glass jar filled with whatever solution you want and put that in the water bath of the Sonic cleaner. I like using glass because I think the glass transmits more of the vibrations