Magpul Stock & Forend Install Mossberg 500/590
Рет қаралды 68,724
2 жыл бұрынShowing how to install the Magpul stock and forend on a Mossberg 500 or 590 shotgun.
__________________________________________________________________________________________
Check out Ecamm Live for live streaming or recording: www.ecamm.com/mac/ecammlive/?...
If you are a gun owner, you need true self-defense liability insurance. Check out Right to Bear Insurance. Get up to $100 off with Palmetto State Armory when you sign up for coverage!
alnk.to/bP7Z0Ua
Need help growing your channel? Check out Tube Buddy which is a great add-on to KZfaq for assisting with your analytics: www.tubebuddy.com/Boomstick
Looking to start a podcast? Buzzsprout is hands down the easiest and best way to launch, promote, and track your podcast. Following the link below and a $20 Amazon gift card if you sign up for a paid plan, and helps support our show:
www.buzzsprout.com/?referrer_...
Equipment I use for filming and podcasts:
VIDEO GEAR
------------------------------------------------------------------------------------------
Camera: iPhone 12Pro Max
Camera: Sony ZV-E10
Sigma 16mm f/1.4 Sony E Lense: amzn.to/3HAanUr
VicTiv Camera Tripod 81”: amzn.to/332PphY
DJI OM 4 SE Smartphone Gimbal Stabilizer: amzn.to/3Hz8Gqk
ULANZI U Rig Pro - Smartphone Tripod Mount: amzn.to/3EQtpUV
AUDIO GEAR
----------------------------------------------------------------------------------------------
Rode RODECaster Pro: amzn.to/3zvoibI
Elgato Stream Deck: amzn.to/3GGG5hM
Blue Yeti X USB Mic: amzn.to/3JejFq3
Rode PodMic: amzn.to/3GcvZpP
Samsun Q2U USB/XLR Mic: amzn.to/3HFokjN
Sunmon Q2U Shock Mount: amzn.to/3HDvZPE
InnoGear Mic Boom Arm: amzn.to/3eSDO7U
InnoGear Adjustable Desk Mic Stand: amzn.to/3tD5dS3
Mic Stand Adapter Set: amzn.to/3EUsYcc
Deity D4 Mini Mic: amzn.to/3FZf9u6
3.5mm Audio Cable 10FT: amzn.to/3n0qz9L
SanDisk 1TB Extreme SSD: amzn.to/34slYa1
SanDisk 128GB Extreme Pro SD Memory Card: amzn.to/3mUmxzK
Samsung Evo Select Micro SD Memory Card 128GB: amzn.to/3FRra4V
LIGHTING GEAR
-------------------------------------------------------------------------------------------------
Neewer 2 Pack 480 LED Light Kit: amzn.to/3JERIbU
Neewer LED 480 Light Panel Softbox: amzn.to/3EXpV31
Neewer LED Light Panel Soft Box: amzn.to/3Mr1Hmt
IVISSI G2 Pocket RGB Camera Light: amzn.to/3zrCcvb
DISCLAIMER:
This description includes affiliate links which earn a commission to help support the channel at no additional cost to you! I only share products and services that I actually use and believe in.
These videos are strictly for documentary, entertainment and educational purposes only. We do not sell firearms or accessories through KZfaq or any social media. All work on firearms should be carried out by a licensed individual and all state and federal rules apply. We are not liable for any injury to yourself or damage to your firearms resulting from attempting anything shown in any of our videos. We do not endorse any specific product and this is not an attempt to sell you a good or service. We are not instructing viewers on how to modify firearms, accessories, or otherwise to change their basic legal function.
@ray.d.oeaux1230 2 жыл бұрын
Great video. No-nonsense, and right to the point.
@_Phantom_Gaming_ Жыл бұрын
Amazing review, just bought the parts for mine and this video was short, sweet, and straight to the point 🤙🏻 thank you
@troybingham6426 Жыл бұрын
Thanks for this video. It really helped me out. (Just installed the Magpul stock and forend on my 590A1). Much appreciated.
@tallmike6598 Жыл бұрын
Nice work very informative without all the extra BS.... *subscribed*
@demartinsm8479 Жыл бұрын
Thank you! Followed along and it went smooth
@zealot777 10 ай бұрын
Thank you sir for this video post. Clear and simple. Respect.
@jimreilly5770 6 күн бұрын
Great instructional vid. Thank you!
@ySketchy 4 ай бұрын
I've been debating on if i want to buy the magpul set up and after watching this video and how easy you made it look, I'm sold.
@EricHarstad-pj8hb 3 ай бұрын
is your forend molded to the action slide or no?
@markmaynard2425 2 жыл бұрын
Best combo install video for magpull furniture I have seen. Maybe add how to do the magpull forend install with the heatshield for 500/590
@TheBlackie882 2 ай бұрын
Does it not fit with the heat shield?
@davidgaddes2107 9 ай бұрын
Heavier than the stock components- interesting. After seeing your install, thought I wanted FDE, but, I think I may be more inclined to the black furniture.
@kctyphoon 2 жыл бұрын
I wanna get the fde set and install them on my 500 SPX since i converted my shockwave to an adjustable brace/pistol grip set up. I feel like both my Mossberg’s are too similar now, and the SPX is still how it came from the factory. Added both pieces to my amazon wishlist. Good vid. Thanks.
@kctyphoon 2 жыл бұрын
And 8 days later - it's done. Lol
@JDubb0508ZW 6 ай бұрын
Great video. Short and to the point. I bought black furniture for my 12😅😅😅
@lordfordification 11 ай бұрын
It makes pumping a chore on the 590a1
@2137Reap Жыл бұрын
Great video!!! I have the same set up, but I was unable to place forend far enough down and was unable to get the castle nut on. Any chance you have suggestions? Thanks for the video
@jamesvia5 2 жыл бұрын
Great video, install was a breeze
@davva360 8 ай бұрын
I have the Mossberg 500 field and security combo. Wonder if this would work for that? May have a look and see if it has the castle nut on it
@lukequim1497 Жыл бұрын
I had to take a dremal tool to my stock that way I can remove trigger group without removing stock every time
@yungskullivan 8 ай бұрын
Thanks!!
@WL59628 Жыл бұрын
Thx for the video but I’m now more interested in wanting those GOT banners.😂😂😂
@scott2228 Жыл бұрын
Thanks.
@taramoon9307 2 жыл бұрын
Did the dry thread locker make it unusually hard to turn the bolt? I just installed one and it seemed excessively resistant .
@manueltorres4815 6 ай бұрын
Bought one of these and it work on my 500. The castle nut just won’t screw on after placing the proper anti turning device. Any advice?
@joefiandaca3060 Жыл бұрын
You didn’t need to tap the old fore grip off with a plastic hammer ? It slid off that easily? That’s encouraging, I have my fore grip coming in the mail this week. Thank you.
@kevinperez919 13 күн бұрын
Would it work if I have the 590s but wanna add thos Magpul upgrade
@tylermitchell8584 10 ай бұрын
Thanks magpul and their doodoo qc staff. Got no hardware kit in mine. Just two things of length of pull extenders. Dope
@RandyQMoore-qi1iw 5 ай бұрын
I am assuming this works for the 590 shockwave too?
@jeromeingramjr.7336 4 ай бұрын
Does this work the same way for the Mossberg Maverick 88?
@DBLOCKDBLOCK-uf3yy Жыл бұрын
Hey there … by any chance do you have play on your forend ????? I like to hear everyone’s opinion …
@jdstripper 2 жыл бұрын
The little tab on the bolt cover broke when I tried to install mine. I don't know if I can get a replacement cover or not.
@scotteger6271 11 ай бұрын
I’d call Magpul they have good customer service
@tjshine7444 6 ай бұрын
The Mossbberg 500 does NOT have a castle nut on the foregrip, just the two slider arms that go into the breech.
@baconeggstoast5327 Жыл бұрын
With doing this is it easy to get barrel off again to maybe put a slug barrel for hunting?
@BoomstickTacticalLLC Жыл бұрын
Yep. Swaps out as normal.
@billhoppe2991 Жыл бұрын
Is yours the 590 rather than the A1? I want to get the one that looks just like yours looks.Thanks for the video. Very helpful
@BoomstickTacticalLLC Жыл бұрын
Mine is technically the 590 Tactical, not the 590 A1
@billhoppe2991 Жыл бұрын
@@BoomstickTacticalLLC Thanks, I don't want the A1 but the tactical like yours.
@5jm6 2 жыл бұрын
Anyone have issues with the nut being properly tightened but when the forend is fully extended the wobble is still pretty bad?
@joshbowen2717 Жыл бұрын
Thats pretty normal for the mossberg 500 my for-end wobbles on my factory mossberg 500
@jonathancupp3686 11 ай бұрын
Forgive me, I’m a novice, but do you have to re adjust the sights after you change the stock and fore end?
@scotteger6271 11 ай бұрын
If it’s a shotgun with a bead front sight there’s nothing to adjust on the one he had in the video. If you have the ghost ring or rifle type sight, or are running an optic like a red dot or scope, then yes you’d want to check your sights/optic.
@somnolentSlumber Жыл бұрын
the flathead bolt at the back keeping the factory stock attached is so goddamn hard to remove lmao fuck me
@nolagospeltracts8264 2 жыл бұрын
I don't think this works on the 500. The action bars are molded on to the forend. It actually can be done but you have to buy extra parts and it's a big histrionic pain in the but. Not really worth it.
@lukequim1497 Жыл бұрын
The stock works fine with slight modification to allow trigger group to drop out freely. You are right about the forend I bought one before knowing and now in the process of installing slide tube. Still worth it to me I’ve heard the stock forend without the slide tubes break easily.
@Expertly_Unprofessional Жыл бұрын
Yall both got the 500 with the pinned forend it sounds like. You have to make sure it's the forend that's held on by the threaded but. All you need with this one is a forend wrench to remove the nut.
@scotteger6271 11 ай бұрын
Same with the Maverick 88, uses the pinned forend. You can buy the action tube that will work with these parts but they’re not that inexpensive, at least for what it is. For what you’d have invested you could probably find a better deal on a 500/590 with a non-pinned action tube.
@ncadburns1020 10 ай бұрын
If you have a pinned forend, just replace the slide tube assembly with a 7 3/4 slide tube assembly. Also make sure you order the castle nut to secure the new slide tube.
@mthomas91088 3 күн бұрын
I had not one problem with it. It says in the instructions you may have to do several modifications if it doesn’t; depends on your gun.
@ghettoaquatics5244 2 жыл бұрын
How to know an AR guy #1 when the action slide nut becomes a castle nut 😂 its almost basically the same thing 😂
@BoomstickTacticalLLC 2 жыл бұрын
I mean… it looks pretty similar 🤣
@ghettoaquatics5244 2 жыл бұрын
@@BoomstickTacticalLLC almost exact! Wish i could use an ar wrench on them i always have those more readily available
@favor4afavor823 8 ай бұрын
It's referred to as a castle nut in the magpul instructions
@rickyramirez3483 2 жыл бұрын
Hey! Can I install 590 wooden retro butt stock and fore grip to my 88?
@scotteger6271 11 ай бұрын
Butt stock should fit no problem, for the forend you’ll need additional parts. The action tube on the 88 has the action bars pinned to it, which won’t allow different forends to be installed…you’d need a replacement action tube from Mossberg.
@rickyramirez3483 11 ай бұрын
@@scotteger6271 thanks for the info
@bluesbondsman 9 ай бұрын
Will the Magpul forend work with a heat shield on the barrel ?
@JSpidey 9 ай бұрын
From my understanding you would need to crimp the heat shield closer to the barrel and possibly sand a small amount on the forend for smooth operation..
@salpena6779 8 ай бұрын
Didn’t have to do the quarter turns but yeah
@thumpervansqueakynuts5848 Жыл бұрын
Great video, I’m throwing mine in the trash though, it came on a gun bubba added stuff all over no way to look down the sights because the cheek rest is too high and the crappy holo sight doesn’t work
@Matt_Kane 11 ай бұрын
Wait. What exactly are you throwing in the trash? I only ask because Magpul sells the “cheek rests” separately. Just a matter of removing one screw to replace. Hope this helps.
@jonathancupp3686 11 ай бұрын
Will these fit the Mossberg 590S model?
@VegasTactical 9 ай бұрын
Yes
@510BIGD Жыл бұрын
Does this stock have a plastic feel to it or more of a rubber feel.
@BoomstickTacticalLLC Жыл бұрын
Typical magpul polymer feel. Does not feel cheap.
@yair7227 Жыл бұрын
I just bought my first mossberg 500….so when I first unboxed my mossberg shotgun…. I went to pump it but I wasn’t able to press the action sliding release lever because it was inside. ( the lever wasn’t down so I couldn’t push it) Is that normal? So the first pump I don’t press on the action sliding release lever since there is nothing in the chamber? Please I need help! Thank you!
@BoomstickTacticalLLC Жыл бұрын
If nothing is in the chamber or mag tube, you should have to press the slide release. I would try dry firing it empty and see if that maybe resets it.
@yair7227 Жыл бұрын
@@BoomstickTacticalLLC the sliding release comes down after I pump it. But after I dry fire it , I don’t have push the sliding release. But once I pump it, it comes down. Is that normal?
@shotgun-studio Жыл бұрын
@@yair7227 yes
@rashalprajapati6180 Жыл бұрын
Can we use this for mossberg maverick
@BoomstickTacticalLLC Жыл бұрын
Not sure, their website says it fits the 500/590 series.
@johnsmith-oh9is Жыл бұрын
You can also use an old tire iron to take out that pesky butt stock screw
@godzswivel5661 4 ай бұрын
Does this work for the Mossberg 590S?
@2A_TO-STAY 7 күн бұрын
Read the video title
@2A_TO-STAY 7 күн бұрын
Read the title, yes it does work
@jonathancupp3686 11 ай бұрын
What is the benefit of these Magpull parts?
@scotteger6271 11 ай бұрын
Adjustability…can easily change length of pull, comb height, various sling options, ability to attach accessories to the forend using the MLOK slots.
@jonathancupp3686 11 ай бұрын
@@scotteger6271 thanks. I’m planning on getting a Mossberg 590S once my shoulder heals completely from surgery. From what I understand the 590S is the only model that will also shoot mini shells without an adapter.
@superiormwc 8 ай бұрын
Plan on getting this with the heat shield on a 590s also. 🙌
@kmattar Жыл бұрын
What’s the benefit of the Magpul forend ?
@BoomstickTacticalLLC 11 ай бұрын
It has the ability to mount a light or anything you would want to it. Plus I think it feels better than the stock one.
@JanEnriquez707 2 жыл бұрын
Do you know if this forend will fit on a M590 in 20ga?
@BoomstickTacticalLLC 2 жыл бұрын
I don’t think so. Everything I’ve seen online only mentions 12GA, even Magpul’s website.
@thisguys8809 2 жыл бұрын
The 20 gauge and 12 gauge receiver are the same size just different internals as far as I know
@mnrodriguez 5 ай бұрын
Can you shoot slugs with that shotgun?
@BoomstickTacticalLLC 5 ай бұрын
Yes
@user-uc4ex8xs8o 10 ай бұрын
Чтобы установить такое цевьё на Моссберг 500 с коротким стволом, нужен специальный адаптер. Иначе не получится. ☹️
@michaelpedraza4647 2 жыл бұрын
Will a 590 forend fit on a 500 ?
@shotgun-studio 2 жыл бұрын
Found this on their website: : Not compatible with the optional Mossberg heatshield, removal is required before use. Also not compatible with 14" 590 Shockwave, 500, 535, Maverick 88, and AOW models.
@semperfi_ny 2 жыл бұрын
I made it fit my 500A. Chiseled down about 2" of the polymer on the muzzle side of the forend. Also cut maybe 1/4" on the action side, just where the action touches.
@Kelsmith2 8 ай бұрын
Another 590 owner that doesn’t realize the 500 is designed differently... The forend will not work on the 500 without significant modification.
@BoomstickTacticalLLC 8 ай бұрын
It will fit some 500 models but not all.
@EMFSafetyZone Жыл бұрын
Let's get to the dark side without hesitation. With this stock, which everyone seems to like so much, you cannot get the trigger assembly out, or get it back into the gun during takedown on the Mossberg 590A1, without having to loosen the stock quite a bit. This requires more time and an additional hex wrench. Whereas with normal takedown you do not need any additional tools. I like my Magpul stock, but this is really a stupid design flaw!
@brandonmckittrick2822 Жыл бұрын
That's not true. I have the Mossberg 590 and have installed the Magpull stock. Ive had no issues removing the trigger housing from the shotgun. Ive never had to loosen the stock.
@jeffadams9807 4 ай бұрын
1st Thing U Need To Do, Is Make Sure It's UNLOADED...
@chuckmatses6803 9 ай бұрын
Ah, you've gained what again?
@kevinperez919 3 ай бұрын
Can I use it on a 590s???