Fyi, @ 0:43 Dicor Part 1 EDPM cleaner activator. @9:45 Dicor Part 2 EDPM Rubber Roof coating / sealer.

Damn!! I sure enjoyed your hard work!!! You should be a newscaster. Your voice is liquid gold!

i bought the material to do mine after watching the Dicor add and after watching your video i cant wait to apply it to our travel trailer.You did a great job!!! i imagine one of the harder parts was putting the plastic up. Thanks Rick

I’m getting ready to do that so thank you for the high points and taping the trailer off. God Bless and be safe .

Nice job! Now I know what I have in store for me this next week. Gonna be a sweaty day. Thanks for the expert video!

Thanks for the video. I got some good info from all your viewer comments. Feel confident I can do it myself now

I have to do the same to my RV. Thanks for the video and one year follow up.

Roof looks great!

I just did the same to my 26' toy hauler. My roof was almost all black because I was on the last layer apparently. RV places wanted anywhere from $3K-5K to replace my roof. I used the same product you used and I'm actually very impressed. I used a paint tray but it really doesn't matter. I will probably be doing one layer every year from here on out.

Thanks for sharing, at this precise moment I'm doing my class C~ RV, And I like your work, and I also have a star craft Toy hauler, with almost the same floor plan as yours, And it's the first time I've seen one like mine.

Thank you, RRR. I feel confident now that I can do my own. 😃

Thanks for the video! Ordered all the supplies to do this to my trailer. Can’t wait to get this done and get out to the campground!

This application not only prolongs the life of the rubber roof, but makes it easier to clean and inspect. Another bonus is that it will increase the reflectivity, and thereby keep your trailer roof cooler, which adds more life, as well as the interior cooler, saving AC use.

Just washed the roof on my fifth wheel yesterday with a little dawn dish detergent water and soft scrub brush....got a few black spots but I feel the roof is good for awhile....having said that it sure looks like you did a great job rrr.....when the time comes I'll do the same as you! Thanks for making this video....much appreciated!!

Nice job, thanks for the vid! Getting ready to do the exact same procedure.

Thanx very helpful! I have a 31x9 roof to do ASAP.

I just did mine. made a world of difference

Thank you for the details and great video.

Nice Job!!!! Nice Truck Too...........

Thanks, it looks great, my 30 foot 08' Toy hauler needs it too! Will have to calculate how much I'd need for 3 coats. I think I need my shower dome skylight changed out while doing this!

Nice job. I would LOVE to see a follow up a year later to see how the new coating held up.

Great video!!

On a sunny day I would bring a good pair of sun glasses.

Very nice job

Plastic covers over shoes. Painters tape other fittings. Looks good

You did a nice job on your roof

Great video men !!! 👍

Awesome job!

Great video, thanks.

Recommend spray down a 50/50 solution of Simple Green & Bleach wait a few minutes and then pressure wash off using a 40° fan spray at least 8-10" (depending upon PSI) away from the EPDM roof then let dry 24 hours. The next day, reseal top edges of all the edge trim pieces with non-leveling DICOR sealant, reseal all cracks with DICOR Self-Leveling lap sealant and/or use eternabond (only where it's really needed) then coat the entire roof with HENRY's Tropicoll 100% Silicone roof coating. It's really that simple!

See that's the same Skylight I have now on my fifth wheel but I want to buy a smoke color one to block out that Florida Sun 🥵 makes a big difference on your electricity bill damn it was a hundred and five with the humidity some of 2020 insane but now I have to get those slides done thanks for showing me how to do the roof I appreciate it very much sir good job 💪 don't forget to pick up a better broomstick cuz the way you doing it that's a killing on your spine

nice job!!

Looks great, but Hon, you really should’ve attached a broomstick or other applicable pole to the handle of your paint roller in the first place. (Silly!). You would’ve saved a LOT of wear and tear on your back without having to bend over. I’ve been doing RV roof resealing for about 2 decades, since I’ve been full timing since my late 20’s.

Great down to earth tutorial. I’d like to know how it lasts the summer/winter.

Well the front of your left sneaker should be nice and waterproof! Good job, like the way you pour the product on instead of using a pan, will do that for the rest of my job.

Lol u broke the broomstick. Thank you for the tip.

Good job

Looks good

I have an old trailer I was thinking to cover the whole thing with 2 coats ? What do you think. Than I’ll paint it and hopefully no leaks ?

Good morning ☀️. If possible can I have an update on the rooftop sealer now that’s it’s been sometime past? Great video

I hope i can do this without screwing it up...im preparing to sell so trying to get everything like brand new again for the next lucky owner of our beauty! :)

Early Merry Christmas for us Dems! Happy Holidays!!

did your roof coating hold up?

How long did you wait between the lap seal and the roof coat?

Hello there, fairly new to the RV world. I was looking through your description for the names of the products you used.

our shop has tried this most of the time we needed two coats. if you are looking for an all around great coatings try rvroofmagic we have been using it for about 4 years now none of our customers have called with issues.

What kind of tape is that? I'm surprised that it held up to the power washer and water. Great job!! Thanks

Enjoyed watching how well these products work. First cleaning then rubberizing. I am curious does this work on the fiberglass roofs too? Very impressed watching you and definitely saves money if you can manage this yourself. Thanks for sharing this video.

nice work! Looks like a good thick layer to keep out the water.. Its been 2 years.. How is it holding up?

Sweet! That looks great. Good job. Now that it's 3 years later, how did it hold up?

I sure hope you had some cold 🥶 Beer after that day !

How's that Dicor roof sealer holding up?? I need to do my 89 yr old Pops place in Florida.... and my 2014 winnebago roof... Looks pretty simple.... just time and effort

Ok so 4 years later... Is it still a good product.. Im looking to do mine on my RV and researching what I should be getting.. Nice work thank you

Save your back - use a broom handle to extend the roller (almost all roller brush handles will do that).

I know the video is 5 years old however i really like the steps you have done and thank you. I am curious on how long did the roof hold up since and just an update is all. I am new owning one and this is why i was able to get a good motorhome for the money. I need to do the same for mine recently purchased. I will budget it into yearly maintenance if need be but hopefully it last longer than a year.

My RV roof was coated two years ago before I took possession but the coating is very thin. I'd like to redo it but I don't know what product was used previously. Should I be concerned that Dicore will not react well with the current covering material?

Tky good Job 💪 I have a 40 foot fifth wheel and I have to do the roof I also want to put a new skylight on it because it gets really hot with the clear one that I have on there now and I'm starting to get a little leak so I'm going to get the smoke one and then I have to get a new cover for the fan that goes in the bathroom because that blew off in a storm and cracked I live in Florida it's a nightmare with storms down here I don't have to tell you but do I cork first after pressure washing or just continue to use that Roofing seal... and then I don't have to caulk the edges and the sides of the roof but I'm going to have to talk down that Skylight and to tell you the truth I really don't even want to open up the bathroom vent I have to get a new cover and I think I'm just going to seal it and I'm going to make the cover smoke instead of clear cuz that bathroom gets hot and I don't want no more leaks

I did it with a bucket an scrub brush an garden hose

Good stuff! I’m about to do mines as well. Where did you get the plastic from?

second coat if you like look good you have to put plastic bag on your shoes...good job...

Should have walked on with sock feet and extension pole. Nice job though. Sure does look better

Hopefully you will still get notifications of comments and be able to help me out ! Im in the UK and have a 1980 Fleetwood Tioga it's roof is awful it's a single sheet aluminium roof with a rubbery coating on too ! Is this paint the correct stuff to cover it all and seal it ? I have the dicor and have cleaned and sealed the front and rear cap and all the vents etc ! Thanks

I sold this in 2018.

How can I prevent water from leaking into a camper roof that already has a leak while I’m pressure washing it?(prior to sealing) Sorry if it’s a silly question, this will be my first time doing this. Someone’s knowledge would be greatly appreciated 😊👐

I am surprised the pressure washer didn’t damage the roof.

Mine was done about a year ago before I bought it, how often should this be done?

What did you use?

It's been 3 years.Does it hold?

Is it still holding up?

HI is it seill working ok i been looking for some thane for our Rv were cane i get some

Where can I get a cover like that?

Will this bond to an Aluminum trailer roof?

Why was there pre adhesive coat used?

Hi! 1st time I will be doing this on my 29 ft camper from 1993. There is some seal around the ac and vents that is black. Do I remove that or just go over it with this? It is not leaking. Figure I find out before the neighborhood handymen (husband of the community) all put their two cents in my work.

Is it imperative to wrap the RV IN PLASTIC ???… and would it be ok to just use hose and brush to clean the roof ???

like the rvroofmagic better our shop has been using it for years and never any customer call backs

I plan on cutting some of the spout off a watering can and dumping my sealer in there. Will save on multiple pours from a can and hogging it up...

did you cut in the edges on the second coat?

Well , sir going on 2 years dose it work and dose it still look good Need to do mine just got to know before spinning the big bucks ! Thanks , Eastern Kentucky

Where can I purchase some of that sealer? And what brand is it? Thanks

Done a good neat job why are you buy and how much is it I couldn’t really see the name of it what all you use can you send me a message on that Aulani I have a 27 foot camper thank you good video

What kind of pressure washer are you using?

I am getting ready to redo my roof but I called Keystone and they said I cannot walk on my roof. I notice your Travel Trailer also does not have a ladder. Any suggestions or did you just ignore the rhetoric?

How did it do with the heat?

Maybe washing it first then tape off the permiter of the camper would work better

That’s all??? Clean and apply?

What was your approx cost on the project. I think my trailer is ready for the same process

Hey i know this was while ago but do you have a list of materials used?

Black spots.... mildew stains.... yuck. Fyi. Try a product called miracle mist. Idk where u are but a stare called menards Carrie's it. Also my local walmart here in ND Carrie's it in the RV and marine section. . This stuff is amazing.. removes the stains like a hot knife thru butter. Very minimal scrubbing.

How many days did this take to complete?

You know if you screw a pole to the handle you won't need the pain killers and icy hot before bed

Did you have any leaks and did it solve the problem? id think this would be somthing you should do often any how! thanks fo your video!

What’s that white stuff your putting again?

Do u have the name of this roof sealer thanks

What is the river product and how much

Did you cut in twice?

Why did you cover the rig with plastic?

What is the length of your RV question

How's the roof coating holding up after a couple of years now?

Was it really necessary to tape off and put up plastic ? Ill be working on my street which would be problematic