SHE GOT A WHOLE NEW FRONT END

No video

SHE GOT A WHOLE NEW FRONT END

Рет қаралды 84,308

Күн бұрын

Check Out The Store! www.lftdco.com
Huge THANK YOU! to our Sponsors:
- Boost Auto Parts: bit.ly/2WSfrj3
- GM Tow Mirrors: bit.ly/2QMM51C
- Eastwood Company | eastwood.com (1VD6692 = 10% OFF)
- Banks Power | bankspower.com
- New Air | newair.com (MAYER240V or MAYER120V = 15% or $30)
- Hornblasters (Lime = 10% OFF)
- Speed Pole (6.7Lime = 10% OFF)
- Jax Wax Car Care (LIME = 15% OFF) | jaxwax.com
- VooDoo Ride (Ryan10 = 10% Off)
- Pedal Commander (lime10 = 10% OFF)
- Ridge Wallet (Mayer = 10% Off)
- Retro Shop LLC
- South Bend Clutch
- Wehrli Fab Custom (6.7lime = FREE SHIP)
- Flo-Pro Performance Exhaust
- Rolling Big Power (RBP)
- Aux Beam
- VanTrue
_________________________________________
30 Days of FREE Amazon PRIME!! : goo.gl/EzssTg
_________________________________________
Links: ⛓
Detailer: amzn.to/2NZWxDB
Shampoo: amzn.to/2NZWPKH
9H Ceramic: amzn.to/2Ql5qEn
Rain X Additive: amzn.to/2xvgfg4
30'' Light Bar: amzn.to/2xnuKCM
20'' Light Bar: amzn.to/2QKvREy
Cube Lights: amzn.to/2NmIRlL
Tailgate Assist: amzn.to/2G4o8yz
Diesel Cap : amzn.to/2NALPyE
Tunes: www.alligatorp...
30 Days of FREE Amazon PRIME!! : goo.gl/EzssTg
FOAM CANNON: amzn.to/2u89qRN
GEAR WRENCHES: amzn.to/2t6FzbK
24 Pack Black Ice : amzn.to/2npbPky
_______________________________________
Music: 🎶
/ capiteeon
theartistunion...
/ lakeyinspired
/ joakimkarud
__________________________________________
Social Media: 📺
Instagram: Ryan2546
Snapchat: Ryan2546
Twitter: Ryan2546
_______________________________________
The Crew:
Mike: / dobronos
Ben: goo.gl/cx8uq9
____________________________________________
I am participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites. Products in the provided links are my recommendations based on honest use and experience with them.

Пікірлер: 410

@rosac6631 4 жыл бұрын

That’s why reviews exist. Leave em a bad one. I always check reviews when I go to new shops and stores.

@jett_teague 4 жыл бұрын

You need to move to Texas where there is no rusting out from driving in the snow and everyone is hard working and not lazy and will treat anyone with the up most respect

@WarKlutch 3 жыл бұрын

Not everyone

@jett_teague 3 жыл бұрын

Ashton everyone except the liberals that live here in Austin and Houston

@joshualocklear1099 2 жыл бұрын

@@jett_teague ntn political about his comment but ofc u made it political, sounds like you are obsessed😂 wait till u find out Austin and Houston as the highest employment rate🤡

@jett_teague 2 жыл бұрын

@@joshualocklear1099 I don’t claim Austin and Houston, they are California for all I care

@joshualocklear1099 2 жыл бұрын

@@jett_teague 😂them same states and cities u hate on is the same ones that keep the country running clown

@kerrfu 4 жыл бұрын

Damn I wish I was there with you at that shop, I love given people a taste of their own medicine and disrespect You gotta call em out so your viewers don't go there, you can hurt their business for being lazy and they'll regret ever giving shit to the next customer.

@kennethgomez7659 3 жыл бұрын

John Mayoral YES!

@tylerblue6829 4 жыл бұрын

Puts a lift and alignment Machine in driveway 😂

@MikeBeatzcom 6 ай бұрын

I wanted to take a moment to express my admiration for the incredible content you produce on your KZfaq channel. Your passion for what you do is palpable, and it truly shines through in the quality of your videos. What sets your content apart, in my opinion, is not only your expertise but also your transparency. The way you showcase both the successes and the hiccups in your projects is not only entertaining but also incredibly insightful. It's refreshing to see a creator who doesn't shy away from the learning process and is willing to share their journey with the audience. In an era where many professionals keep their work behind closed doors, your approach is a breath of fresh air. Your authenticity and commitment to delivering high-quality content make your channel stand out from the rest. It's evident that you genuinely love what you do, and that passion is contagious. As someone located in Missouri, I can't help but wish you were closer to my area. Your unique approach to your craft is something I believe more people should experience, and having you down here would be a treat for automotive enthusiasts like myself. Thank you for the dedication you put into your work, and I look forward to each new video you release. Keep up the fantastic work, and if you ever find yourself in Missouri, know that there's a fan eagerly awaiting the chance to meet you in person.

@jimmykingjr2692 3 жыл бұрын

So i wasn't sure if i like how tall the Tahoe was but when i passed you on 71 today i was definitely digging it!! Great DIY work. Stay away from those shaddy shops around here..OH!!

@joemeier659 3 жыл бұрын

The first thing I did myself was install a radio in my first truck 3 years ago. After watching your videos, I am doing more stuff by myself instead of wasting money on someone else to do it. I just wanna say thank you for giving me that mindset. I love your videos and keep up the hard work.

@robertharris932 4 жыл бұрын

This is why I became a mechanic because I got tired of no one doing it right and being lazy. At my shop in harrison we work from open to close and sometimes after to make sure we make the customer happy and always have our southern hospitality always friendly

@aidanc7905 3 жыл бұрын

Dude said screw you im just going to do it myself😂😭 I love this man

@bretwagner818 2 жыл бұрын

She is driving like a dream. Put on about 4K miles since she came home with me. 👍🏻

@ryan2546 2 жыл бұрын

SO SICK MAN!

@HoldenPowell_ 3 жыл бұрын

I do alignment every day, to adjust the toe only it would only take about 20-25m. I love when a car comes in and that’s all it needs because it doesn’t take much to adjust it and the toe normally never fights u like the caster and camber does sometime do a lot of vehicles

@bradenledger 4 жыл бұрын

I feel your frustration with shops I can’t stand people that do half a** work.

@CraftwerksMC 4 жыл бұрын

Ryan, thanks for being the ultimate driveway mechanic and showing how it's done.

@bradleyhitchcock6152 4 жыл бұрын

The fact you got so much crap from the shop and still kept your composure in a time of "Karens" is a testament to your fortitude and maturity. I am so honored to be a part of the LFTD Co. Community even more so today! Ryan, keep on killin' it brother! I love to see you grow!

@rudykahler7357 4 жыл бұрын

Totally agree started doing work on my car after multiple lazy shops and false work done and just treating me like another unknowing customer. Keep preaching man👍

@darkestdreams2131 3 жыл бұрын

HEATED!!!! I feel your pain bro. Be patient. The Truck will be amazing.

@ramirogarcia9281 4 жыл бұрын

Wassup man love the builds and admire how u work and explain things

@ramblingrider4392 4 жыл бұрын

Thanks 😁 🤔

@ramirogarcia9281 4 жыл бұрын

Rambling Rider always man 👌

@dodgeboys92 3 жыл бұрын

I just bought my first impact the other day Milwaukee High Torque 1/2” just like yours. The reason I got it is you, personal experience of using one on a farm.

@Dodge-td7ig 3 жыл бұрын

Good for you I agree I wish I had all tools to do it right and take care of my truck the way I would good for you

@miggy2503 4 жыл бұрын

Bet u $10 that if they knew him they’d actually try😂

@miggy2503 4 жыл бұрын

Grizz 2 tf makes his nice ass Tahoe a ricer.

@colton7373 3 жыл бұрын

Miggy250 he said ricer neckbeard not tahoe lol

@marlin6084 4 жыл бұрын

Learned a long time ago that if they don’t want your money go to someone who does......I had the very same thing except I had a screw in my tire.....the techs were just standing around and wouldn’t fix it.....Walmart was right next store....went in bought a set of side cutters, a plug kit and extra plugs.....I plugged the tire right in front of them in their parking lot and told them as I pulled out they missed out on the $20 I was going to tip them!.....some are just lazy!!!!

@BigJoe954 4 жыл бұрын

I feel your frustration but bro you got so heated you said Silverado instead of Tahoe 😂 21:30

@coryhyde8169 4 жыл бұрын

I have never seen him that heat on camera

@danizahrah210 4 жыл бұрын

10:30

@lieutenantluka5860 4 жыл бұрын

Lmao! I didnt even catch that 😂😂😂

@mikelawrence4041 4 жыл бұрын

He has a purple Silverado too

@FragTieritstierrr 4 жыл бұрын

Mike Lawrence he sold that one bud

@brandonwiggins6463 4 жыл бұрын

I’ve had to replace my hubs on my 2007 new body style Silverado 3 times and I’ve had it for 3 years. Finally got a good set and I have heard the same sound. I hope that fixes your problem. Badass build by the way! Loving the look of the Tahoe! Makes my jaw drop every time I see it!

@jayneitz7787 3 жыл бұрын

That’s a gmt 900 steering gear I used to build them. Seals go out on the inside a lot

@patchessimon 3 жыл бұрын

After you paint your Tahoe you need to put Brutus on the hood!!!!! You are in Buckeye country. Lol. Love the builds great channel.

@Weeeeefox 4 жыл бұрын

I thought that on chevys the cv axle hold everything together I drove one without a cv axle and i only made it 4 miles and the wheel ripped off.

@eric1800 3 жыл бұрын

hat off to you man. This is why I watch your videos. hard working and humble!!

@jeremywest9836 3 жыл бұрын

RCV makes killer CV axles for off-road and lifted trucks.

@alexbelcher2893 3 жыл бұрын

I couldn’t tell you how many wheel bearings I’ve had to change on my Papaw’s 2009 Chevy 1500 they go out a lot and it’s that same popping sound that you have when they go out

@nissanmikey 4 жыл бұрын

they are correct about the offset of those wheels and alignment heads. most newer hunter alignment machine clamps to the tire itself, however the base of it has to be flush and touch the wheel face itself. with offset like those wheels, even the dually adapter for the heads aren't that deep.

@BRONZE_ROCK 3 жыл бұрын

Ryan that's why i started to do my own repair and mod work. the most frustrating is when we go into places to get work done there because we cant afford a expensive machine. and they treat us like a complete idiot that has never picked up a wrench before in our lives and we easily know more than they do.

@mrtank1967 3 жыл бұрын

So true so much bad customer service know it’s sick. Love your go do it yourself attitude. Good work. And now your camo hoodie is awesome at the cottage -1 today.

@2024Trump_fan 3 жыл бұрын

I agree 100%, you can't get anything done right unless you do it yourself, at least you know what you've got and you can learn as you go. I've learned a few things by watchin you're videos. Keep up the good work!

@blackdiamondf1509 3 жыл бұрын

You will use that ball joint press a ton! I just found out the hard way today that Mcgaughy’s kits actually call for a different ball joint on the 15-20 f150s.

@danielcaroen1208 4 жыл бұрын

Yeah I work at a dealership, the whole ride height thing is bs😂 we do alignments all the time on lifted trucks and stuff. It is true that you need adaptors for the sensors and depending on the rack you can’t fit super wide tires on it. Pretty stupid on the dealers part tho to turn away work especially when you go out of your way to try and get the alignment done

@bryantlangele8223 4 жыл бұрын

Thanks for keeping me entertained during hurricane Sally

@jacobn3160 4 жыл бұрын

You’re lucky the wheel didn’t fall off running no cv axles like that. Those hubs need the tulip in them. I’ve seen hubs snap backing out of driveways when guys don’t know that

@Bhdobbs 4 жыл бұрын

I’ve been waiting for someone to mention this 😂

@jwestf 3 жыл бұрын

Go to tire discounters or Nelson frame and axle. Nelson is a great old school truck shop

@jwestf 3 жыл бұрын

I just know you’re in Ohio. Not sure where at but Nelson frame and axle is in Columbus area

@lukelong9796 3 жыл бұрын

Also check the steering shaft u-joints. Cv axles are possible as well

@huntercox2644 4 жыл бұрын

I use to work at a tire that act just like that just flat out lazy which is why i have always done my own stuff to every vehicle iv own and all my buddies . Love you videos man ! One of these day life will get out of the way and il buy some of your merch ! Keep up the great work man !

@jwjackson18 4 жыл бұрын

Hey Ryan, do you remember me asking about those tie rod ends? About cutting them? Well I took them off and the lock nut stripped out. I had to run to the part store and buy new inner tie rods. I had to cut the new tie rod ends and also cut the new shaft on the inner a 1/2 in off. It was an ordeal but it’s done. I’m glad I had so many problems because the inner tie rods were very bad. . I have an appointment in the morning to get it aligned. Thank you for all your hard work on the videos. You taught me how to do everything. Cheers, Ryan!

@jwjackson18 4 жыл бұрын

Also Ryan, it sucks that you had to go through all the problems that you did. Hopefully you will report those people. They don’t deserve their certifications or a job. That’s bad business.

@mathewhunt81 3 жыл бұрын

Hey Ryan ! its a great time to take off the body molding on the sides before you repaint it !

@frankierojas8195 4 жыл бұрын

Hard work always speaks for itself. That's how you earned what you got in your drive way man !! The builds look incredible 🤙 truly a represintation of your mindset never give up !!!

@provider7631 4 жыл бұрын

Right on man!!!! cant rely on anyone but your self

@irishawn5856 4 жыл бұрын

Tahoe looks AMAZING. 👍😎

@evanch123456 4 жыл бұрын

Make me want a Tahoe.

@stevepowers8240 3 жыл бұрын

Were the control arms and struts tightened after you put the weight of the vehicle down? Maybe the thumping could be from the binding of the bushings if it wasnt under load first. If not, and everything checks out, it could just be the nature of running such heavy tires, however, I suspect the leveling kit on top of the suspension lift could be the cause as well. Maybe it's engaging the bump stops on the uppers even though you have clearance when stationary. Hope it helps, good luck and keep up the great content!

@reeceknipp944 4 жыл бұрын

Bro I love you and I really want to start a build because of you

@adjustthis 3 жыл бұрын

You speak to my soul on taking vehicles to people. Ive said exactly the same thing about tire shops local to me. FYI don't use Moog Hubs. Chinese junk. Use Timken or OEM.

@jeromefrady794 4 жыл бұрын

Most shops pay techs on commission, so the guy basically said he was done getting paid for the day. This is why I do as much of my own work as possible.

@colton7373 3 жыл бұрын

definitely my favorite Tahoe build I’ve seen, I hope he puts a mean sounding exhaust on her

@tannercampbell9777 4 жыл бұрын

I agree nobody wants to work nowadays i can’t stand dealing with people i don’t know how anything gets done in today’s world

@johnreaves2974 4 жыл бұрын

“Don’t try this at home... unless it works, then try it at home. Just kidding don’t try this at home” 😂

@DM-qp9mu 3 жыл бұрын

Someone once told me the money you save by doing jobs yourself pays for the “specialty” tools or tools in general that you buy and may not need again for awhile and that was the truest thing I’ve ever heard. And on the plus side you now have more tools at your disposable

@lukelong9796 3 жыл бұрын

Try dual steering stabalizers to help with the bump steering.

@djmadd1212 3 жыл бұрын

Once you get the whip all good you should take the motor out n get it cleaned up n get it painted up that red color maybe do little upgrading for the heads

@cheathamtv4356 4 жыл бұрын

My dude Ryan he said “I’m gonna buy a wheel and tire machine” 😂😂 tell us what the shops name is and what road there on I’ll go flood there yelp with 1 stat reviews 🤔

@joshopfermann5556 3 жыл бұрын

That's dumb

@cheathamtv4356 3 жыл бұрын

They deserve it if there not gonna do there job it’ll prevent other people from having to deal with there bs

@cheathamtv4356 3 жыл бұрын

Josh Opfermann go continue to get your shit out of a junk yard my dude 💀

@joshopfermann5556 3 жыл бұрын

@@cheathamtv4356 It's a better use of one's time then writing fake yelp reviews for a business you have not done business with.

@cheathamtv4356 3 жыл бұрын

Josh Opfermann dear god it takes 5 secs to write one review take your old ass on somewhere not even knowing how to work a iPhone or your ass is probably working off a android huh

@Jenuin 3 жыл бұрын

I feel you with dealing with people.... I also want a ride machine..... Brutal

@Declan_Walter06 4 жыл бұрын

Great videos Ryan, keep up the good work your videos are so inspiring!

@jcrooks842011 3 жыл бұрын

sounds like the control arms are bottoming out when you hit a bump the leveling kit may be stretching to much with the heavy wheel and tire setup check your spacing between the bump stop and upper control arm

@colinlee3910 4 жыл бұрын

i haven’t watched a minute and i already know it’s a banger

@decano2431 4 жыл бұрын

Oh and I haven’t seen it done but what if you took the drop pucks from the 3.5 kit and put them in if it didn’t come in contact with anything you could prolly run the leveling kit with it with no popping

@SUBI_PaT 4 жыл бұрын

I had that same clunk it turned out to be the torsion bar bushings

@Smalll_films 4 жыл бұрын

Hey Ryan old if you’ve thought about it but taking off those side strips on the doors would make the Tahoe look so much cleaner 👍

@Smalll_films 4 жыл бұрын

Idk** not old

@kamroncollins4328 3 жыл бұрын

Hey Ryan, I don’t know if you know this or not but when you go to start the Tahoe if you just push the key forward and let go it will turn over till it starts

@jrvasquez5623 4 жыл бұрын

Luv the vids harbor freight for the win yup sumtimes its better to do it urself nice to see a humble big time youtuber

@thomasfrederick5757 4 жыл бұрын

Check your. Ujoints to be sure it’s not popping and the sound isn’t traveling

@backwoods_outlaw7108 4 жыл бұрын

My 05 Tahoe 4x4 has a rattle in the front after a full front end rebuild I just gave up. Btw make sure your abs wires and speed sensor wires are still attached to the frame correctly because I put wider tires on mine and they were not attached to the frame correctly in the rear and my tires wore them in half and they are $96 a piece for mine

@kcscustom9759 3 жыл бұрын

Yeah you really need a hydraulic press for those rack bushings they are a pain without one. You should invest in a harbor freight 20 ton! You look like you could really use one, mine has been a life saver. Control arm bushings, track bar bushings, panhard bar bushings, front diff case bushings on IFS trucks, & one of my favorites, leaf spring bushings. I will NEVER do leaf spring bushings without a hydraulic press again. But damn dude that alignment shop, talk about pure LAZINESS. That’s exactly why I bought all the tools I needed & started doing everything on my truck myself, witch also watching your videos definitely gave me a lot of motivation to go this route. Nothing fancy tho I’m workin on a budget just like everyone else, like half of my alignment tools & tire changing/balancing tools are homemade but they get the job done and at the end of the day I save a ton of money and I don’t have to deal with these lazy f***ing “ASE certified” a$$holes because I have a BUNCH in my area too & it’s extremely frustrating to deal with. And now that Ive been doing it for a few years and really know what I’m doing i can get my alignment closer then the “ASE certified” techs at my local alignment shop would anyways! Like it’s sad honestly that a guy in his extremely UNlevel driveway with alignment tools made from stuff from Home Depot can get his alignment closer then the “pros” are willing to with a full professional alignment rack! And I say *willing to* because I know they could easily get it on point if they put an ounce of time & effort into it. But, they just don’t.

@peytonphipps4969 4 жыл бұрын

Love everything you do but wondering if a blue def delete is possible for your truck

@coltonburt6896 4 жыл бұрын

Looks great bro! Keep the hard work up!

@wobo44 4 жыл бұрын

Gotta love those 1700 techs who work for the big man. If it was their own company they would care. Sadly, doesn’t surprise me. Laziness is contagious.

@deesnuts7787 4 жыл бұрын

I couldn’t believe how much work I had to do just to get an alignment on 33s with a level. Only person that would do it locally was 4wp and they told me they were booked 4 weeks out lol. I guess they just didn’t want to do it either.

@tristen2264 3 жыл бұрын

As soon as I saw the fluid and thought about my power steering😂 fluid

@trcampbell74 3 жыл бұрын

That is bull man... So sorry you had to deal with that crap. But so glad you're not tolerant of it. You remind me of what my dad who was a machinist engineer... No formal education except high school education, said... If man made it, man can fix it... More power to you young man!

@johnhurt66 3 жыл бұрын

I’ve had the same exact problem with my 04 silverado that’s got six inches of lift and 35s can’t find someone to align it right if they do align it that is been out of alignment for 5 years

@ZeKoRaziiStockton 4 жыл бұрын

Alignments are the best they take 30 mins and pay 1 hour and the hunter machine tell you exactly what to do

@ryandecker3127 3 жыл бұрын

U do need some special adapters for big offset rims they make a few different ones we use hunter as well but they shoulda had em

@colton7373 3 жыл бұрын

My friend got in a crash with a cop and we had to replace a tie rod and sway bar link, very annoying to do without the right tools. Special tools are highly recommended.

@shanemailhes6866 4 жыл бұрын

Budd look into kryptonite hubs they are lifetime warranty no questions asked

@capplehans9888 4 жыл бұрын

I feel the same way bro...no one can do it better then me, and if it gets messed up its all on me.

@brandonsfarm 4 жыл бұрын

Hey man try this .. put it in gear and hold your brake and hit the gas some if you feel the popping then I would check your driver side motor mount they are famous for going bad on those body styles ! Happened to mine twice and I had the same symptoms as you ! Hope this helps

@jasonpartlow4252 4 жыл бұрын

I exactly know the feeling,dealt with it to much and do my own work on my truck,if i dont know how to do the job i will by the end of just doing it

@korn111685 3 жыл бұрын

The CV stubs hold those bearings together. If you didn’t need front bearings before I definitely would do them now.

@JR-wp7nc 3 жыл бұрын

Those guys are useless bro i have a 04 2500 2wd i had a bearing blow out i watched 1 of your videos gave me the upmost confidence to do it myself boss i not only replaced both bearing but the inner outer tie rods n bump stops and swaybar links saved mmn yself over 800 i only spent in parts 280 i was so proud of myself 😂😂 your videos are so helpful and your truck is awsome as well as your other vehicles 👍👍👍

@troyl4107 3 жыл бұрын

This is why I'm here, your passion with everything you do, your all in. must have been belle tire lmao i don't go there anymore, everytime I did ,seemed as a chore to do anything..similar to your situation..Take care 🙂

@danielpniewski5241 3 жыл бұрын

Have u tried the sway bar links and bushings that's what my old car did and it worked

@joshlengkeek6261 4 жыл бұрын

It sucks when you can’t find the issue so you start guessing and you end up rebuilding the whole thing just to figure out that it was a simple cheap part

@firestancegang132 4 жыл бұрын

Just replace cv axles and outer tie rods and hubs and you'll be good. It will give it way better tighter steering

@Mr.TBirdy 4 жыл бұрын

I totally agree with you about Milwaukee tools. At my tire shop we use their impact drivers hundreds of times a day. We always beat the s#%t out of them and for being two years old. They run like they came off the factory line.

@Badhabbitgaming 3 жыл бұрын

We get that over here bro hence why I dont work in a shop no more, grinds my gears with the laziness that some have 💯👌

@gaetanomanila8894 4 жыл бұрын

I’m thinking it’s the lift. I’ve heard where some people have had to tack it in some spots.

@lieutenantluka5860 4 жыл бұрын

Bro, thats exactly why i have always done all my own stuff on my vehicles! Most Certified Mechanics these days, Stupid, lazy and cant trust there work! I feel ya bro! I learned everything on my own by just doing it. Great vid Ryan! ✌❤😎

@taylorjackson7008 4 жыл бұрын

Both my cvs did the exact same thing when i leveled my 08 Denali . Eventually shredded one of them

@martincaballero5666 3 жыл бұрын

I like how it looks. How big is the lift? And how big are the tires and wheels?

@aldovalle2795 4 жыл бұрын

Bro you hella dope with cars keep doing the videos

@carenthusiastlifestyle2950 4 жыл бұрын

Check all u joints, it could be the hubs, but also it could be in the transfer case or something like that also, keep killing the game 👌🙏🏻

@countryboy7643 3 жыл бұрын

I replaces my rack and pinion to on my o2 camaro the reason why your stealing is tight is because the bolts that connect the tie rod ends to the hub are to tight. You have to losen them thats what I did to fix my stiff tight steering.