Ryobi Pressure Washer Repair - How to Replace the Pump

Рет қаралды 106,726

5 жыл бұрын

Need help replacing the Pump (Part # 308653054) in your Ryobi Pressure Washer? Watch this how-to video with simple, step-by-step instructions for a successful DIY repair.
Don’t already have this part? You can pick up an authentic OEM part sourced directly from the original manufacturer here:
www.fix.com/parts/pressure-washer/ryobi/fix9938329/pump-308653054/?SearchTerm=fix9938329&SourceCode=3
Fix Part Number: FIX9938329
OEM Part Number: 308653054
Why you might need to replace the Pump:
1. Stuck Unloader Valve
2. Damaged or Melted Valves
The information in this video is specific to Ryobi Pressure Washers. To find an Pump specific to your model Pressure Washer, or to use our helpful model number locator, visit www.fix.com
Not what you’re looking for? For more Pressure Washer repair help click here: www.fix.com/parts/power-tool/pressure-washer/
For more helpful Pressure Washer Repair videos, you can browse through the Power Tool Repair playlist on our KZfaq channel: kzfaq.info/get/bejne/b9iXaM57vsfXmGw.html
Fix.com is committed to providing you with high-quality parts, quickly and easily. Find out more about our fast shipping and interactive customer service on our website.
www.fix.com/
Stay safe during your repair! Be sure to check www.fix.com/safety/ for proper safety procedures before you begin. Use of this video is at your own risk, without liability to Fix.com.
Connect With Us!
fixdotcom
fixdotcom
plus.google.com/+fixdotcom
pinterest.com/fix.com
If you found this video helpful, give us a thumbs-up, and subscribe to this channel for more useful repair videos! Don’t forget to leave us a question or comment below, and our customer service representatives will be happy to help!

Пікірлер: 78

@ttwyman7751 2 жыл бұрын

Very good video. Extremely detailed and at a good pace.

@abelvillarreal5383 4 жыл бұрын

Awesome video. Thank you for the content.

@abissvc 3 жыл бұрын

Thank you for sharing!!! Great help

@michaelwelker3595 3 жыл бұрын

Great video!

@giopirmisashvili5514 5 ай бұрын

Thank you

@lalo2641 Ай бұрын

Thanks

@jonbabtis8666 4 жыл бұрын

Hi just bought a ryobi 3000 psi pressure washer, im wondering if theres in the pump and where is the location to add it? Thank you

@angeloamica5838 Жыл бұрын

Thanks for your video. I have a Ryobi 2900 psi 2.3 gpm. Oil is leaking from the bottom. Where can I get washer seals?

@stephenstudzinski6651 2 жыл бұрын

Where is the best place to order a new pump for this Ryobi 190?

@MrEvanBacon 8 ай бұрын

Can you put a faster pump on this model of pressure washer?

@anthonyedmond2538 3 жыл бұрын

Spray nozzle water flow adjuster repair

@rpmazzella 3 ай бұрын

Replaced the pumpand the unloader valve and still low pressure, any suggestions

@marlon5656 8 ай бұрын

Would a bad pump cause it to turn off once the trigger is pulled. It idles but it turns off once I pull the trigger.

@ourgreenworldhorizonmediae2071 2 ай бұрын

My idler assem only has a retainer clip or staple and doesn't have a nut for loosening like the one in this video

@christianmayensv Жыл бұрын

I need that water pump. Where I can Get that?

@user-qo5kd4dt9j Жыл бұрын

Where do you drain the oil and refill the oil in the water pressure pump 5:58

@lancekmurray 3 жыл бұрын

Wow, perfect. I found mine has a crack in it today. Been a couple of years since I last run it, but I know I prepared it properly for storage. Oh, well, at least it will be more economical if I fix it myself. This will be the 2nd time I've had this replace (1st for hard water deposits). Wish these things were designed to be a little more idiot proof (not accumulate hard water deposits, freeze plug, whatever).

@wildwoodtop 2 жыл бұрын

Did any oil spill from the crack

@lancekmurray 2 жыл бұрын

@@wildwoodtop No oil, just loss of water pressure.

@CommanderSix 2 жыл бұрын

What contraption is on the opposite end of the thermal relief? The black circular thing? My dad needs to replace it.

@FixDotCom 2 жыл бұрын

That is the garden hose coupler. Look up your pump using the pressure washers model number. Some manufacturers offer the coupler as a replacement part, others offer very few parts and you will need to replace the pump. -Mark

@juanjirau8994 3 жыл бұрын

I have the same pressure washer, the issue is that sometimes when I press the trigger of the pressure hose nozzle it don’t response !!

@donschlonski2936 3 ай бұрын

Mine is doing that right now and I'm looking to replace the pump

@truongtran1305 3 жыл бұрын

Mine doesn’t fall off after all the bolts are undone. It’s pretty stuck. Am I missing something here?

@bigbomb5904 Жыл бұрын

Mine is the same, did you figure it out yet?

@jaymartinez6250 Жыл бұрын

@bigbomb5904 2:02 you can see a little metal bar sticking out from the bottom of the motor on top. Since he has probably already taken his off once or twice before this video it comes out freely. Yours may not since it's the first time removing your pump more than likely. That little metal bar is probably stuck in there a little.

@jaymartinez6250 Жыл бұрын

His hardware is all brand new looking as well

@paulverrilli4899 2 ай бұрын

It's probably due to corrosion. Use a penetrant like PB Blaster on the shaft, give it a while to set in (could be minutes or hours depending how bad) and good old fashioned bludgeoning with a hammer to free it since you're not keeping the pump, presumably. Then, I would strongly recommend cleaning the shaft and key and applying a lubricant to prevent corrosion next time around. Careful not to beat on the thermal relief he's instructing you to transfer to the new pump or you'll be buying that too!

@quintinvaladez8663 Жыл бұрын

What is the part # on the pump?

@54Bluenote 3 жыл бұрын

Do you need to adjust the pressure on the new pump?

@knightridert71 3 жыл бұрын

@samsydneygarrote5976 2 жыл бұрын

I have a hard t I me taking off the pump? Any ideas ? Took off the bolts already

@Pingaheimer 3 ай бұрын

spray the bolt holes with some wd-40 or your rust penetrant of choice and let it sit overnight.

@dustinkruize6428 3 ай бұрын

Imagine replacing a new pump with a brand new pump and a brand new never used pressure washer. Yes everything is made easy

@carmanwright2889 8 ай бұрын

What is the best way to try and free a stuck unloader valve?

@Pingaheimer 3 ай бұрын

I was having a hell of a time with mine and sprayed it with some wd-40 and let if sit for a few hours. Came out with pretty easy prying with a flat head screwdriver after t hat.

@robertmabante227 Жыл бұрын

What is the pump number

@aamador50 4 жыл бұрын

Hi. Do the pumps use any oil??

@kt550 4 жыл бұрын

Any update on this?

@aamador50 4 жыл бұрын

No update sorry

@kt550 4 жыл бұрын

aamador50 manual says nothing. I don’t think they are serviceable. Only thing I’ve seen are people tapping drain plugs into them. Seems like a “lifetime” part, once pump goes its time for new washer or pump assembly

@kennethgilbertdds7249 4 жыл бұрын

There is a spray to use if you plan to store the pump like over winter. This is sprayed backwards up the water hose connection port/fitting. Otherwise no. The motor requires oil of course.

@Elsanta666 4 жыл бұрын

Can i run hot water through this pumps

@kennethgilbertdds7249 4 жыл бұрын

No this one. The hose is cold only. Needs a better hose.

@PantherSpawn 4 жыл бұрын

My ryobi has the idle down throttle.. The replacement pump does not.. Can I swap my old throttle to the new pump? If so, how?

@adamlombardo3490 4 жыл бұрын

Paul did you figure out how to remove idle down throttle?

@PantherSpawn 4 жыл бұрын

@@adamlombardo3490 I did not. I have not had time to look at it. Likely going to send the replacement back and get another one with idle down assembled.

@vargazzdlh 4 жыл бұрын

You can lock tbe mechanism to run in high rpm but you will have a high fuel consum e high noise all the time

@steveale0711 Ай бұрын

Just move the spring on the idle down to a small hole under the on/off switch plate. You won’t have idle down it will run at speed all times but won’t matter.

@kaostheory1370 5 жыл бұрын

Any ideas on removing the old pump that is rusted/siezed onto the engine shaft on this particular setup. I've soaked it in pb blaster, used a pry bar, rubber mallet, heated the shaft, even hooked a chain around it with a bottle jack but to no avail... please put me out of my misery lol

@suppaman12 5 жыл бұрын

kaostheory1370 sell it as is and get another. It sounds like the problem will be more severe than just the pump

@bgdavidcryptonite4158 4 жыл бұрын

wedges between the motor and pump..is how i got mine off..was a pain...

@vargazzdlh 4 жыл бұрын

Same problem here, I'm think in cut off the old pump with angle grind😡🤬🤞

@kaostheory1370 4 жыл бұрын

@@vargazzdlh so that's what worked. I had a friend take an air hammer and angle grinder to it and after a while finally got it to release. Just make sure that you dont damage the motor shaft. Cut off as much of the pump as you can until you have enough room to get the grinder on it

@AJKlos 4 жыл бұрын

I even took the whole pump apart and still can’t get this pump off. This dude slid that thing off like

@jesusdanielberistainlopez1244 4 жыл бұрын

How chance The oil?

@kaostheory1370 4 жыл бұрын

Some pumps that don't have a oil plug to drain, you have to use a transfer pump to pump out the old oil. Harbor freight have those for 4.99$

@chrishennek5900 4 жыл бұрын

I am replacing the pump on my Ryobi v190 3100 PSI pressure washer. The Idle down cable looks very different from the one in your video ; instead of a screw to hold it in it has a U shaped clip which I removed but the cable does not seem to want to pull out please help.

@taddhoward2113 4 жыл бұрын

Im with you. did you figure it out?

@taddhoward2113 4 жыл бұрын

ha, just got it. Put a pair vice grips on it. It has two seals inside holding it in. It pulls out

@danhead8795 4 жыл бұрын

@@taddhoward2113 any tips? I have been fighting with mine for about a day and cannot get it out. Also, how did you get it into the new pump

@bobbydempsey8044 Жыл бұрын

I have the same problem how do you get the throttle cable out

@bobbydempsey8044 Жыл бұрын

I have the same problem How do you get the idol cable out

@rpmazzella 4 ай бұрын

Nice job. What does your wife have to say about you changing a pump in a white drees shirt?

@tundrablue05 4 жыл бұрын

How do you know the pump is bad? Mine runs fine till you add water pressure... I figure it may be the pump

@FloRuski 4 жыл бұрын

Fellow youtuber lol, I've heard a lot of the time it is an unloader issue. If the pump has the water turned on and it stalls out the engine unless the trigger is pulled on the gun then the unloader may be stuck.

@jakegetz6636 4 жыл бұрын

@@FloRuski do you have any clue how to remove the unloader valve on these ryobi pressure washers? because i tried everything and can not get it out, it should just pop out with a screwdriver but it wont.

@FloRuski 4 жыл бұрын

Jake Getz I found that heating up the aluminum to pretty hot temps with a torch made it easy to pop out. Mine was stuck as well, hope it helps man.

@knightridert71 3 жыл бұрын

@@jakegetz6636 my ryobi 3100 unloader is the same way can not get it to come out at all with out busting the freaking pump case it is so stuck ,,and i have herd several of these ryobi's do this and i had to spend $150 to get a hole new pump . i even heated it with a torch but that could mess up the rubber seals this thing pisses me off

@Pingaheimer 3 ай бұрын

@@knightridert71 the o-rings are cheap.... it should be easy to remove once you get some rust penetrant like wd-40 in there and let that do it's thing for a few hours.