Man, this is so cool. I have a 48 Pickup that's in storage. It's my next project once I finish up my current perpetually evolving snowball of a project. Your video got me eager for it. Subscribed!!!!
@j-ridecustoms Жыл бұрын
Awesome thanks for watching 🍺🍺🍺I’m looking forward to seeing your project..
@franksgarage8551 Жыл бұрын
Me no like winter too! Im sticking an s10 under a 50 studebaker. Going to make an attempt at keeping the firewall and floor from the s-10. Screwdriver for mock-up, if it works, stick with it!
@j-ridecustoms Жыл бұрын
Thanks for watching.. I’m definitely going to be watching your videos on that project I kinda like those trucks..
@rustedjunkgarage3316 Жыл бұрын
Nice job, after watching you weld I remember I have a MiG gun light, those work great for old eyes. Going to be to be a neat truck. 👍
@j-ridecustoms Жыл бұрын
Yes, those lights are awesome …. yes, the girlfriend is going to have a pretty sweet truck to drive around this summer
@johnnicholls8721 Жыл бұрын
It would be great to see the actual welding being done close-up. Type of Weld Pattern., Welder Settings and Type of Weld etc info would also be well received. The Channel looks good!
@j-ridecustoms Жыл бұрын
Thanks for watching. I’m sure if you watched one of the other videos it shows me welding and what it looks like afterwards.
@DesertRatFabrication Жыл бұрын
Very nice, you got a ton of work done on a short time, hope to see you back on the wife’s truck soon, catch you later
@j-ridecustoms Жыл бұрын
Will do man thanks for watching 👍👍
@MarksGarageChannel Жыл бұрын
I like that screwdriver/vise-grip tip. Thank you.
@j-ridecustoms Жыл бұрын
Your welcome bro thanks for watching
@jjsonsspeedshop4962 Жыл бұрын
Nice work, reminds me when I did a 52 FORD F1 on an S10 chassis. Happy Holidays 👍🏻
@DesertRatFabrication Жыл бұрын
Hey JJ, did you do that before you started the channel
@jjsonsspeedshop4962 Жыл бұрын
Oh yes, long before the channel.
@SchneiderClassics Жыл бұрын
great work mate
@j-ridecustoms Жыл бұрын
Thanks man 🍺
@mustanggarland24 Жыл бұрын
Awesome video friend 😊definitely subscribed 👍
@j-ridecustoms Жыл бұрын
Awesome man thanks for watching & I will check out your channel as well 🍺
@amcdrywallllc68088 ай бұрын
Yes, it is complicated but you will surely be happy at the end.
@j-ridecustoms8 ай бұрын
Yep thanks for watching 👍👍
@clasicradiolover9 ай бұрын
Suggestion: make Playlists so your builds are easier to follow
@j-ridecustoms9 ай бұрын
Thanks for the suggestion 🍺🍺I’m just learning this KZfaq stuff I promise the videos will get better..
@clasicradiolover9 ай бұрын
@j-ridecustoms4082 I actually was in bed when I saw your build in my suggestions. I went to the play lists to start at the beginning, but I didn't see the beginning, so I went to sleep
@j-ridecustoms9 ай бұрын
I guess you were just that tired lol
@gmc.joesousa43608 ай бұрын
I use C10 and K1500 chassis. the wheels look better in the wheel well
@LocsShorty2 ай бұрын
Hey bro thanks for the video bud I just had a question about the S10 is there a specific year make and model that fits. I got a 48 pick up and I’m looking to trade my Road King hopefully for a S10 to get the ball rolling thanks for your time.
@j-ridecustoms2 ай бұрын
Thanks for watching … you have to find an S-10 or a Chevy Colorado or even dodge Dakota with the right wheelbase for your application you have to do a little bit of homework on your end .
@codieclaytor9 ай бұрын
Hi sir, love the video I do have one question, where did you get the body and bed mounts at? Thanks in advance.
@j-ridecustoms9 ай бұрын
I made them myself… I’m going to be posting another video of me making similar mounts for the next project … thanks for watching 🍺
@Jrsclassics8 ай бұрын
You gave the measurements on one of your videos the front 3 inches from the slot and 4 3/4" tall then the back cab 6" tall and the front bed 7" tall. What are the distances between the mounts?
@j-ridecustoms8 ай бұрын
Thanks for watching you’re going to have to figure that out for yourself because I used a big cab so that’s where it worked for mine but you’re gonna have to play with them till you find it perfect for yourself .
@user-tx2tq8vi8f5 ай бұрын
cool
@SchneiderClassics Жыл бұрын
isnt there rule with welding on the frame? great work mate
@charlespartak2435 Жыл бұрын
rule? what rule??
@j-ridecustoms Жыл бұрын
No there’s no rule, unless the welds look really crappy
@user-go3ky4ei5i11 ай бұрын
I have a 1954 3100 pickup. Which is 116" wheel base. Which S10 frame works best. From what I can find a standard cab long bed S10 is 117.9" wheel base.???
@j-ridecustoms11 ай бұрын
What’s an extended cab measurement?? I think it’s 117
@user-go3ky4ei5i11 ай бұрын
@@j-ridecustoms standard cab S10 108.3" WB, S10 Standard cab Long bed 117.9 " S10 ext cab 122.9"
@dadedubbledee9 ай бұрын
Would the S10 work for a 58 Apache?
@j-ridecustoms9 ай бұрын
The front clip would but not the whole frame unless you cut it and alter it
@charleswillis40584 ай бұрын
I'm doing mine in my garage,can I buy the support mounts from U
@j-ridecustoms4 ай бұрын
Sorry no … but there is a guy that sells kits. It’s called chassis easy swap kits. You can find him on Facebook and on Google.
@eliasvillarreal2691 Жыл бұрын
When you’re welding on the frame, does your welder have to be a 220v?
@j-ridecustoms Жыл бұрын
Thanks for watching .. yes it’s a 220 welder
@waltchilli11 ай бұрын
What year of s10 the frame from and is it long bed did u have to cut the frame
@j-ridecustoms10 ай бұрын
Thanks for watching … I used a 84 long bed regular cab frame.. I cut 6 inches off the back & the front horns …
@meh-canics9628 Жыл бұрын
The Face! The Face!
@j-ridecustoms Жыл бұрын
The face is in place
@Alllivesmatter249 ай бұрын
What year frame is that. I’m building one as well mine is a 49 gmc and the chassis I’m using is a 97 Chevy extreme and those frames are a lot beefier. I just got to shorten it 6”s
@j-ridecustoms9 ай бұрын
It’s an 84 s10 regular cab long box
@Alllivesmatter249 ай бұрын
@@j-ridecustoms I see. Like I said that mine is a 97 and there frame is boxed right up to the leaf spring mount. At least the extreme is that way being they are already a high performance truck.
@j-ridecustoms9 ай бұрын
I’m glad you are happy with what you have … & so am I ..
@Alllivesmatter249 ай бұрын
@@j-ridecustoms yip. I’m excited to get mine done
@carlosmartinez36514 ай бұрын
How thickness the material
@j-ridecustoms4 ай бұрын
3/16th
@RichieCat4223 Жыл бұрын
Where is part one ?
@j-ridecustoms Жыл бұрын
It’s there it’s the video rite below this one ☝️ thanks for watching 🍺
@RichieCat4223 Жыл бұрын
@@j-ridecustoms Don't see it.
@j-ridecustoms Жыл бұрын
It’s the one pic with the red fire wall
@nickhavens797 Жыл бұрын
The year of the truck, either 47 or 48 because the gas tank isn’t behind the cab
@j-ridecustoms Жыл бұрын
It’s a big truck cab … thanks for watching
@joerodriguez3028 Жыл бұрын
👍
@j-ridecustoms Жыл бұрын
Thanks for watching 🍺
@tomtrajnowski4266 Жыл бұрын
What is the downfall of using a 2000 S 10 extended cab 2 Wheel Dr. frame
@j-ridecustoms Жыл бұрын
Your going to have to do your own homework on that one …I haven’t used any of those frames for anything yet