Talking about sound.. If I remember correctly Jimbo has a train that screams by his garage frequently, 🚝🚝🚝🚝I cant wait to hear that. I am sure he cant sleep well with that racing by....😲😲😲

@@ocdman202 I would like to have property right by the train tracks I would put a penny on tracks and pick it up after it got smashed by the train..

@@mommapanda5736 Ok but be careful on the tracks.. Trains go by pretty fast. 🚝🚝🚝

I guess we could be seeing you do the tear down if / when there’s a catastrophic failure lol keep up the great work everyone

I think at this point the engine has given all its got. After all its basically a stock industrial engine and I'm running it past its power curve. The Stupid charger will be the game changer. Of course if I blow it up, I reckon you will be getting a package from UPS. lol

Forgot about that, will do! Stay tuned!

This Robot Cantina makes it look so easy but we know it is not. This Jimbo seems to put a lot of effort into these videos..I enjoy every one of them also.

@@mommapanda5736 Momma... that is correct.. The effort it takes to make something like this must be staggering.. JIMBO OF ROBOT CANTINA makes it all look easy. Script, voice over and editing seem very well done. What do you want to see in future videos??

@@ocdman202 I might have mentioned before == it would be neat to see a full length feature film with ROBOT CANTINA.. I know that would be a lot of work, but the fans would love it.

@@ocdman202 Sorry I made reference to you being a hype man but -

​ @Momma Panda - I guess you cant have community without comments right :p

There's little in life as frustrating and maddening as applying a LOT of pressure on a 19mm box wrench that Elves have carefully weakened, only to have it fail catastrophically at 150 foot-pounds or so, sending your bare hand into a neighboring knuckle-bashing protuberance at high velocity.

@@DarronBirgenheier Gnomes and Elves are in the same league.. There is biodiversity by species.. Love your comment That poor hand of yours🧙‍♂🧙‍♂🧙‍♂😂😂

Dang!! So that's it. I've got elves. Can elves open a fridge? Woke up this morning and all the beer was gone. I'm sure I didn't drink...at least, that's what I told the wife.

@@Ian-iu2tl What did the wife say?? I put a little Bailey's Irish Cream in my coffee on Sunday while I watch Jimbo of Robot Cantina.. That makes the morning mellow...

Since I have OCD.. I will add to this..Put a little champagne in your orange juice.. talk about a mellow morning..

Revolutions per minute "is" ??????

@@midixiewrecked7011 I read that as the "revolutions" being the noun (revolutions being an idea in this case) that the being verb is referring to, and the correct one being then "are", and the "per minute" part just a clarifier, and thus not referenced by the being verb.

Unless the engine is direct injected then the mixture for best power is usually slightly rich. The cooling effect on the intake charge increases charge density and the bit of extra fuel helps ensure all the O2 burns even if the mixture isn't perfectly homogeneous.

@Surestick88 I think you don't know wtf you're talking about.. intake charge temp has nothing to do with volumetric efficiency.

I'm with you, this engine wants more fuel under full load.

Yes... the joys of intake reversion... Hopefully, JIMBO OF ROBOT CANTINA has another video out this weekend. 🚙🚙🚙🔧🔧🔧😊😊😊

I'm sure Jimbo thanks you for this... I love this channel💖💖💖💖

@@ocdman202 Have you seen the video that just dropped today.??.. Love what you are doing at ROBOT CANTINA , jimbo!

Kansas is a great state... These videos are great also because they are educational and fun... 🤓🤓 Hope Jimbo of ROBOT CANTINA finds some more missing tools 🔧🔧😊😊

I really like those tidbits too, hoping for more to come.. I think there may be a new video out this weekend.. 🚙🚙 I remember being stuck in calculus, feeling the need for humor or clarity..🤓

I’d go as far as to say it’ll supercharge better with the standard camshaft 👍🏻

@@garyhargreaves5630 I am told there are two different cam shafts -- flat tappet and roller.. Is there a way of checking the ID number to find out what you have??What do you mean by standard camshaft??

@@ocdman202 standard as in stock probably

@@akkudakkupl Thankyou for this reply.

@@garyhargreaves5630 I would probably agree, at least it'd be an interesting comparison. I wonder if it wouldn't be too expensive (or even possible) to get a custom ground camshaft to pair with the supercharger.

Yes those garden gnomes 🧙‍♂🧙‍♂🧙‍♂ make finding tools🔧🔧🔧 a hassle! I love this sneak peek to the next episodes.. What would you like to see???😊😊

TROUBLESHOOTING=== you bet with garden gnomes in the area.. Just be careful with those traps. They are too cute. by far. 😊😊😊

Looking foward to see the results that the Supercharger will bring with.

@@isaacmirandajs YES TO THIS!☺

Yes... the garden gnomes always make finding tools 🔧🔧 a hassle.. Hopefully JIMBO OF ROBOT CANTINA will have another video out this weekend. 🚘🚘🚘

THIS IS A GREAT COMMENT.. I sure hope Jimbo sees this.. I learn alot just by reading these comments. That does sound like a very interesting motor.. 🚙🚙🚙

@Alfred Wedmore Thank you so much for this lengthy and smart reply.. I learn so much from these comments.. ROBOT CANTINA has some really smart viewers.. 🤓🤓

@Alfred Wedmore I've found a couple different 48v golf cart controllers (6 and 10kw) and even a cheap Chinese PWM controller run the AGNI just fine. I even ran one on a 3kw ebike controller.

Batteries are definitely a huge outlay. on my 2 seater go kart I used 4-12 volt "power chair batteries" and on my electric boat motor I've used a couple 1kw 48v ebike batteries. I may switch to power chair batteries in the boat sometime in the future when the ebike batteries get low.

@Alfred Wedmore The AGNI motor works differently then most, I've actually read that AGNI motors are often directly connected to high power sources under 24 volts. I think that this ASMO carts article about the Lynch motor is very detailed and helpful when working with them to get peak output power and just interesting information overall.

The 420 certainly qualifies as a suboptimal engine design and it likes to run rich. I will continue to experiment with the AFR but it looks like the engine really wants more fuel.

Yes to this... Better him than us.. Have you seen most of his videos??🚙🚙🚙😂😂

And usually by lunchtime project farm is testing some tools, oils or products! Sundays are my favorite KZfaq day

That is nice, now I just need Andy Griffith instead of this Brady Bunch hoopla

The noises from those gnomes were really cute🧙‍♂🧙‍♂🧙‍♂ Their women - folk will be out looking in the garden🔧🔧🏕🏕

What do those lamentations of the gnome women sound like?? Hopefully JIMBO OF ROBOT CANTINA has another video out this weekend.🧚‍♀🧚‍♀🧚‍♀🧙‍♂🧙‍♂🧙‍♂

Yes.. to this experiment with an electric motor.. Hopefully JIMBO OF ROBOT CANTINA will have another video out this weekend.. 😊😊

That is a very thoughtful detailed reply.. I hope Jimbo of Robot Cantina sees this.. I always find these comments interesting.

Hopefully, JIMBO OF ROBOT CANTINA will have another video out this weekend.. 🚙🚙

YES... to Sunday morning, cup of coffee with a big dollop of Bailey's Irish Cream in it, and Jimbo of ROBOT CANTINA...🚙🚙that music is toe tapping good. 🎶🎶🎶🎶 Drums??? oh yeah..

@@ocdman202 Man, I love that toe tapping music also.. I usually order room service when I am watching these videos.. I like my breakfast on a tray and my juice in a wine glass. ROBOT CANTINA IS GREAT..

@@mommapanda5736 Momma, room service..do you travel a lot??

@@ocdman202 Why, yes I do... I travel alot and this is one of the best car you - tube channels out there...

Momma, what other car you - tube channels do you like??

Wishing you a wonderful week also.. I love watching this channel as well

@@mommapanda5736 I like to start my Sunday with a good cup of coffee and ROBOT CANTINA.. I also like some good pastries with my coffee..

@@ocdman202 I might have mentioned that we like to have a big stack of pancakes with maple syrup while watching our Sunday morning ROBOT CANTINA...

Yes to great video.. JIMBO OF ROBOT CANTINA usually puts out a video on the weekend... Can't wait to see.. 😊😊

Yes,, my kids == two tool thieves.. Hopefully JIMBO OF ROBOT CANTINA will have a new video out this weekend..🔧🔧☺☺☺

I'd just modify the code to add a filter on the reading, maybe ignore readings made on closed inlet valve.

Enthusiasm is the engine of success.

Extermination.!!. They are too cute by far...

@@mommapanda5736 Momma, I say no no no to extermination.. those jurisdictions are too strict.

@@ocdman202 I think they a kinda cute.. They are just misunderstood.

@@mommapanda5736 That one armed gnome can get a job as a paperhanger.. 🧙‍♂🧙‍♂🧙‍♂🧙‍♂

@@ocdman202 soo oo cute one armed gnome paperhanger.. so funny.

Yes, me too. I get my coffee with a big dollop of Bailey's Irish Cream and sit back and watch first thing on Sunday.

@@ocdman202 Man, Have you ever tried a dry martini and caviar..??? I like bagels with onions and lox sometimes too... I like to have all that ready when I wait for that ROBOT CANTINA video..

@@mommapanda5736 Momma, I have never had caviar... I have had martini's however. I like to have a well stocked bar when I watch ROBOT CANTINA... 🍸🍸🍸🍸☺☺☺🍹🍹🍹

@@ocdman202 Yes a well stocked bar fixes many troubles including the mechanical kinds

@@mommapanda5736 Yes.. to this.. I am told the plan is to get the 420 up to 70mph by using the super charger.. then move on to the 670 V twin.. 🚙🚙🚙🚙

Yes, That was so cute.. 🧙‍♂🧙‍♂🧙‍♂🔧🔧🔧😜😜!!

Finally learned as well... Hopefully JIMBO OF ROBOT CANTINA has another video out this weekend.. 😊😊

Sheer poetry.... Star and coronal and bell April underfoot renews And the hope of Man as well FLowers among the morning dews Now the old come out to look Winter past winter's pains How the sky in pool and brook Glitters on the grassy plains..

@@ocdman202 the gromns are talking jimbo haha

@@TheViny633 🧙‍♂🧙‍♂😊😊

Hopefully, JIMBO OF ROBOT CANTINA will have another video out this weekend. Maybe more about fuel injection will be mentioned. ☺☺

OFF GUARD?? Perhaps another video will be out this weekend.. 😊😊 we shall see🚙🚙

So glad you subscribed.. I hope Jimbo sees this comment.. It is always good to think about safety here.. This is indeed uncharted territory.. 🚀🚀🚀

The shot with the torque converter showed the old fuel line setup, the lines have since changed.

Yes to learning more... I think another video comes out this weekend. I wonder about using one for accelerating while another for cruise myself.. 🚙🚙

These little cars are in high demand with the price of fuel. I have been trying to find another one for a while now.

@@robotcantina8957 you mention price of fuel. Wait until we go full electric how much that's going to cost when your electric bill goes up $500 extra a month. 😆

JIMBO OF ROBOT CANTINA usually puts out a video on the weekend.. Lets see if anything comes up about this car.. 🚙🚙

Yes.. that explains the 10mm in the garden bush.. now that spring is on the way.. Hopefully JIMBO OF ROBOT CANTINA will put out another video this weekend.. 🚙🚙🚙🧙‍♂🧙‍♂

It's not that tough, they all have more business than they can handle. It's more of a problem with their internal policies and worker relations. High turnover = constant stream of crappy noob drivers. Source: I have worked at both the brown and the purple, and have friends in the usps. Gov benefits are why postal workers stay longer, and by extension are better at their respective jobs.

@@nobodynoone2500 Yes, I understand those government bennies My admiration is for the usps also..

Monopoly problems, oh well

@@mommapanda5736 Momma, when you talk about government bennies, what type of job did you have?

@@ocdman202 Does the CIA ring a bell??

Sooon!

This is true for me too.. I know very little about mechanical stuff but I am learning.. JIMBO OF ROBOT CANTINA makes it fun. 🤓🤓

@@ocdman202 OCD man, I am not very mechanical either. I like this channel for the "edu - tainemt" I hope Jimbo keeps on keepin on with this.

@@mommapanda5736 Momma, I like how RobotCantina does this troubleshooting stuff. JIMBO OF ROBOT CANTINA makes it fun

Yes.. I leave this channel up and running while I am cooking.. It is soothing to listen to and I get some pretty good laughs from this "edu - tainment..

@@ocdman202 I love "edu taintment" wish we had it when I was in school...

YES... The munchkins keep the pixies away.... the pixies keep the trolls away... the trolls keep the gnomes busy.. the synergy is great..🧙‍♂🧙‍♂ What other lighthearted fun can we have with ROBOT CANTINA??? Any suggestions for more fun in theses videos??🤡🤡

Yes to this.. Keep the videos coming.... Hopefully another video of JIMBO OF ROBOT CANTINA will be out this weekend..😊😊

I have my tea and crumpets ready to watch Jimbo.. Where are the gnomes🧙‍♂🧙‍♂🧙‍♂??

@@ocdman202 Man, I usually make a big batch of lasagna and have a good bottle of red wine decanted waiting for these videos Where are the gnomes??

@@mommapanda5736Momma, that sounds yummy . I look forward to more mischief from those gnomes🧙‍♂🧙‍♂🧙‍♂

@@ocdman202 On Sunday morning, we sometimes have a big stack of buckwheat pancakes with blueberry syrup.. Yum .

@@mommapanda5736 Momma, Have you tried omelettes with cheese?? I like to make those on Sunday morning while watchin ROBOT CANTINA. 🍳🍳🍳🥘🥘🍴🍴🍴

So good that you have good control around there.. How do you lasso these little folk🧙‍♂🧙‍♂🧙‍♂Where do you think they will spring up next??🔧🔧🔧10mm is always the first😊😊

@@ocdman202 I always think about that episode of AvE where he gets a new socket set and instantly grabs the 10mm and just chucks it in the trash, cracks me up every time.

@@MatthewHolevinski Yes, indeed that sounds funny.. I do love the sense of humor that Jimbo of ROBOT CANTINA has keeps me watching ...

Momma ,I just love reading the comments on this channel. The viewesr have a great insight on a lot of things and they don't hesitate to express their views...

@@mommapanda5736 Momma, I think that JIMBO'S plan is to get the 420 up to 70mph by using the super charger.. then move on to the 670 V twin.. 🚙🚙🚙🚙

You are absolutely correct, thank you for taking the time to point out my mistake. Indeed, the driven pulley needs to be adjusted and not the clutch. My only concern is we are not using a genuine Comet 40 series driven pulley and it dosn't have the adjustment holes. From my research, it appears I need to move the hole at least .5 inch/13mm to start off with and see what happens. When we publish the video, we will include the datalog files showing the RPM curve as the torque converter goes through its range. should be interesting. Unfortunately it is rainy and cold this week and the car is off the road due to unrelated upgrades. Stay tuned.

This is a tough conversation to have in the comment section. I use AFR because that is what I'm used to seeing. If I switch to lambda things get a little confusing. So picture this.... I'm just a monkey and bump the VE numbers up or down. test the car and bump the ve numbers again. I'm only looking at 5 or 6 cells and when the car go faster I'm happy. Doing the scientific tuning whether its Lambda or AFR means little to me when the engine seems to want more fuel than what is appropriate. If switching to Lambda helps the microprocessor then I'll do that, but at the end of the day I just bump the VE numbers until the car goes faster. Hope that makes sense.

@@robotcantina8957 It's a bit of a tough conversation to have, I guess, but the point i was trying to make is that tuning as if the stoichiometry changes is a bad idea. Even if it does change, because the o2 sensor doesn't care what the stoichiometrical ratios are. You might aim for mid-12's because that's what your head tells you, because that's what the stoich mixture is for what you're aiming for, but you end up rich because the lambda sensor only sees 0.8 lambda or whatever, and reports back stoich numbers as if you're running gasoline. If you're using manual tuning to add power, most of this is semi-irrelevant, since that's just used to generate automatic tunes, but still something good to know when reading AFR. I hope I'm making sense, I guess.

We are going to try that first. The driven pulley I'm using is not a genuine Comet product and the holes do not exist, but I know what your talking about. We will have to modify it for the additional holes.

Let's see what happens next.. Hopefully another ROBOT CANTINA video will be out this weekend.. 😊😊

Thanks! The video really didn't get into much detail, but I focus on the acceleration between 50 to 60 MPH, This range is only 5 or 6 cells and it is past the power curve of the stock 420 engine. I have spent a lot of time trying to find the right mixture and it is a work in progress. For some reason the engine wants a richer mixture. Leaning it out + adding timing seems to slow the car down and cause the CHT to rise above 300F. The weather is not cooperating this week, but I'll get back to tuning soon and report the findings.

@@robotcantina8957 while its a shitload of work - I think your dyno would be great to solve this...dyno as same cells it runs at - and just do an optimization, plot lamda vs power and go from say .75-.92 lamda and then do and ignition sweep same test at a rich best lamda setting(afr is a 'bs' number anyways unless you truly know exactly what the fuel's real stoich is). And lamda is just a guy around a corner telling you what he saw after the crime happened. It's not truly accurate to combustion conditions but it's generally close enough to be useful. You should see a window range where it makes about same/best power and then for air cooled I suggest go to the richest fuel setting that still makes good power. The other thing to try and replicate is engine temp it actually sees while running in the car. I wouldn't sweep the engine on the dyno for a "curve" I would just hold it at the rpm of where it begins acceleration at in car. Max acceleration/fastest time is achieved by best power delivered early in a race - and top speed is just raw power. So ideally for accel times the faster it can get off the line and going initially the faster your times will be (usually at expense of top speed due to gearing). Love your channel - you are brilliant and wish I knew more about your car engine dyno - that thing is sweet. I need to add a function brake like yours was to my inertial dyno wiht a load cell so I can do steady state. I bought a second dyno water brake, but plan to convert it to an engine dyno and keep my chassis dyno wiht addition of load cell. Right now I use an automotive disc break - works good but heats up fast!

@@HPRaceDevelopment Enthusiasm is the engine of success.

Hopefully JIMBO OF ROBOT CANTINA has another video out this weekend. 👍👍👍GOOD CONTENT😊😊

@@ocdman202 Have you seen the video that just dropped today.??.. Love what you are doing at ROBOT CANTINA , jimbo!

YES TO ROBOT CANTINA.. GREAT VIDEO.. Those poor little guys🧙‍♂🧙‍♂🧙‍♂🧙‍♂love tools.. We shall see more mischief in the future I am sure... 😜

Do you think the gnomes are after the gas??⛽⛽⛽???

Love the videos 💖💖💖Hopefully JIMBO OF ROBOT CANTINA will have another video out this weekend😊😊😊

I believe another video of ROBOT CANTINA is out this weekend. we look forward to more laughs..

AFFIRMATIVE TO THIS.. I would appreciate a little longer video also maybe JIMBO OF ROBOT CANTINA would consider making an autobiographical movie at some point.. I would hope to see something about 2hours long.

@@mommapanda5736 Yes to this.. I would LOVE to see a full length feature film of ROBOT CANTINA.. Jimbo is the genius that is creating all the buzz..🚙🚙🚙

@@ocdman202 Yes to this. He is a genius. The full length movie would take some time however... why would you want an autobiographical movie??

@@mommapanda5736 Well, We all want to know how this channel that is going viral got started , right??🚙🚙🚙

There is a lot of positive chatter out there about this channel ROBOT CANTINA is becoming quite popular🚙🚙🚙🚙🚙

I like your comment.. I have my cup of latte ready.. Ready for Sunday morning and cup of Jimbo...

Sounds like a dream job :)

Because I have OCD, I will comment further... Do you have biscuits and gravy with your latte??

@@ocdman202 Do you mean me? Because I drink pure black espresso and don't eat until a bit past noon, keep my fast going from shortly after the start of the evening when I have a big dinner all the way through the morning, like 7 PM to 1 PM is all fasting and ketones

@@Avetho That is fascinating.. from dinner all the way through till morning all fasting and ketones. Is that hard to do? I admire you for this. I like that" mug full of expresso" maybe one day JIMBO OF ROBOT CANTINA will have mugs we can buy...

Your head sounds great to me😊😊 Jimbo of Robot Cantina has a way of inspiring people 🤓🤓 He is an inspiration to my Sunday morning.

In all likelyhood you could reach the same numbers with the stock engine in that small car though....

@@ocdman202 while I wait for this video on Sunday morning, I have a good cup of coffee and those "everything' bagels and cream cheese..

@@mommapanda5736 Momma, sounds great.. While I wait for these videos on Sunday morning, I usually pour myself a good cup of tea.. I have some toast with jam waiting also..

@@ocdman202 I may have mentioned this before, but I like to have orange marmalade with my tea and toast.. while watching my Sunday morning ROBOT CANTINA videos..

Great work indeed... 🔧🔧🔧🚙🚙🚙 Hopefully JIMBO OF ROBOT CANTINA will have another video out this weekend.

I believe JIMBO OF ROBOT CANTINA will have another video out this weekend.... this is a very nice project!

@@mommapanda5736 I did see another video from ROBOT CANTINA.. they seem to come out on Sundays.. it is a very nice project..👍

This is exactly the issue people with ITB's face witjh no common plenum to equalize pressure, and there are a few methods. Some hondas have a volume connected to the airbox with a large tube.

Similar has to be done for proper turbo function on a 1 cylinder

Averaging shouldn't be a problem for the processor, but depending on the averaging period, the latency could make control more difficult.

I wouldn't do that to you. I hate in-video commercials.

@@robotcantina8957 Thats very Righteous!

That is a really good point... Arms race!! cute. Hopefully another video comes out this weekend..👍👍👍 we shall see🚗🚗🚙🚙

Camera? Do you mean Cambot? Cambot is work in progress, otherwise these videos with the Honda Insight are just for fun. The goal is to get the car to go as fast as possible with a lawnmower engine.

Yes, me too, Love the videos..

@@mommapanda5736 Momma, did you watch all of season one?? there were some really good videos in season one.. The buzz is that season two is really popular so far💖💖💖

@@ocdman202 I might have mentioned that I would like to see a full length feature film with ROBOT CANTINA.. I know Jimbo is busy but the fans would go wild...

@@mommapanda5736 Momma would that film be animated or more like the Wizard of Oz...?

Yes to this🚙🚙🚙... this series is great.. Hopefully JIMBO OF ROBOT CANTINA will have another video out this weekend. 👍👍

I thought that part was hilarious also..🧙‍♂️🧙🧙

@@mommapanda5736 Momma, I love the humor on these videos.. what do you want to see more of for content??

JIMBO OF ROBOT CANTINA usually has a video out on the weekend.. Let's see if one comes out soon...🚙🚙

Now this sounds like a really well thought out comment.. I sure hope ROBOT CANTINA reads all these entries.. I learn so much from these comments.. There are so many gifted smart viewers out there..

I agree, I think most of the advice i get was for liquid cooled multi cylinder engines. The single cylinder air cooled really wants more fuel. The Map averaging code seems to eliminate the need for a vacuum chamber.

WHAT?? I thought the orc was more like a goblin like in The Hobbit. I thought ROBOT CANTINA just has gnomes... oh my....

@@mommapanda5736 I think goblins and like the gollum of Lord of the RIngs. Are you talking about Hobbits now? Orcs are different of course....

SInce this is in Kansas, I think he need to mention Munchkins and the Tin Man too.

@@ocdman202 Thanks for that.. Anything is better than those scary ORCS my goodness even little toto would be frightened..

“I've found that no matter what life throws at me, music softens the blow.” ―

I'm afraid not, as explained in the video we need to wide ratio range in order to accelerate the car as fast as possible.

The little alternator will be featured in a future episode. It was purchased from amazon . It is a Kubota alternator and you also need the voltage regulator.

This is a great comment.. I love that == "gardening the tools to grow Snap - On trees" .. those little guys are cute🧙‍♂🧙‍♂🧙‍♂I hope Jimbo of ROBOT CANTINA can find his tools🔧🔧🔧

Yes indeed... it takes delicate hands to grow a Snap-On tool from a Craftsman... Hopefully JIMBO OF ROBOT CANTINA will put out another video this weekend.. 🔧🔧🔧🔧🚙🚙🚙

Those little guys are cute🧙‍♂🧙‍♂🧙‍♂ I couldnt stop laughing also... 😊😊

Let's see if JIMBO OF ROBOT CANTINA puts out a video this weekend.. we need a good laugh😂😂

I'll have to do the math, but the volume of the charge pipe from the supercharger to the manifold is about 1.5X the engine displacement. I'll have more videos on the supercharger setup coming soon.

I sure hope JIMBO OF ROBOT CANTINA would be willing to test that theory... Hopefully another video will be out this weekend. 😂😂 wondering if the same is true for a supercharger.. 🚙🚙🚙

Hoping that JIMBO OF ROBOT CANTINA has another video out this weekend.. 👍👍

Yes, but they are hard to get. As you may or may not know, most honda engines spin counter clockwise., However the original Insight engine spins clockwise. Most Honda transmissions are unsuitable for this project. I believe the Integra RSX gearbox fits with some modifications and has close ratios.

@@robotcantina8957 Of the top of my head, thought I remember 90s preludes with the H series motors also have the same layout as well? Edit: Seems I was mistaken about the prelude. But based on google images of different honda model engine bays, it seems like not just the RSX but also other 02-07 hondas used variants of the K20 as well and had the transmission on the left. Maybe a manual from the right kind of civic/crv/accord might also have more suitable ratios than the insight if an rsx unit is too difficult to find? It seems honda has since moved to putting all their transmissions on the left so one from a newer car may also work although the mounting might be even more different from your prelude than an older gen.

We are thankful for ROBOT CANTINA hopefully another video will be out this weekend. 😊

Kansas is a beautiful state... I love driving the back roads and pretty prairie.. Can't wait till everything is blooming again.. I hope Jimbo sees this comment. His videos are so good. 😊

I'll add to this.. I think the plan is to get the 420 up to 70 mph by using the supercharger then move on to the 670 V twin.. 🚙🚙🚙

@@ocdman202 well tbh he love in the perfect place to try lol there is not many people that go up to Hutchinson these days.

Yes, it seems the gnomes 🧙‍♂🧙‍♂🧙‍♂ have sticky fingers🔧🔧🔧🔧!!

@@ocdman202 LOL

Those gnomes have sticky fingers..🧙‍♂🧙‍♂🧙‍♂🧙‍♂🔧🔧🔧 so cute.

Sticky fingered gnomes... so true.. Hopefully JIMBO OF ROBOT CANTINA will have another video this weekend.. 😊😊

s second time m metre length kg kilogram mass A ampere electric current K kelvin thermodynamic temperature mol mole amount of substance cd candela luminous intensity

I'm only having a little bit of fun when I make fun of metric measurements. According to my channel analytics the largest audience is in the USA, however I provide the metric equivalent to imperial numbers whenever possible.

I agree.. Maybe JIMBO OF ROBOT CANTINA will do longer videos in the future.. What content would you like to see??

@@ocdman202 Man, I would like to see a movie about 2 hours in length..I know it would be alot of work but that is what I am looking forward to. I dream about a ROBOT CANTINA MOVIE

@@mommapanda5736 Who would you have as the star of ROBOT CANTINA.. Brad Pitt did a good job in FIGHT CLUB.. how about Edward Norton he was good too.

@@ocdman202 Brad Pitt or Edward Norton?? That would be a 3 hour movie.. we love movies..

@@mommapanda5736 Momma,, If JIMBO OF ROBOT CANTINA makes a full length movie, what kind of car would you want it to be about??

Yes, it will be a turbo!

🧙‍♂🧙‍♂🧙‍♂🔧🔧🔧🚙🚙🚙 lol me too...

Most robots are engineers..☺🔧🔧🔧🔧🚙

Looking forward to more from Robot Engineer Cantina. May be this weekend.

Yes... ;the engineer type of Robot... hopefully JIMBO OF ROBOT CANTINA will have another video out this weekend..🚙🚙

Those cute little guys🧙‍♂🧙‍♂🧙‍♂may find themselves in a pickle! I hope Jimbo keeps on keepin on🚙🚙🚙🚙🚙🚙🚙

Yes to garden gnomes for fuel🤓🤓 I hope JIMBO OF ROBOT CANTINA has another video this weekend. 😊😊😊

This didn't make it to the video, but last week I tried extending the intake tube all the way to the grill opening on the car. The results were mixed, I wasn't able to get a stable air/fuel reading from the wideband.

@@robotcantina8957 Ahhhh, that's to bad. Thanks for letting me know though, its an education.

@@DarkLinkAD ROBOT CANTINA we look forward to your next video here.

Map stands for manifold absolute pressure I am told. Your point is well taken on this.. Irrelevancy is tantamount with proper calibration.. Thank you for this. When you say "tuned it like normal" what do you mean.. ??

@@ocdman202 disregard the maximum and minimum map reading. If the sensor is just reading an offset, it literally won't matter whether the fuel table cells are at 96 or 93kpa, the value in the cell is what matters. If the sensor reads 93kpa but atmospheric pressure is actually 96kpa, you'll just treat 93kpa like atmospheric. He didn't need to add an offset to the sensor because all you do is change the kpa numbers on the y-axis of the table.. the values in the actual cells won't change... because what the cpu thought was 93kpa was actually 96kpa.. but the O2 sensor is still reporting its readings. If you tune the fuel for a certain air:fuel ratio based on the kpa and rpm, the pressure won't actually matter.. just that the sensor is consistent. If the pressure is actually 96kpa but the sensor is reporting 93kpa, that doesn't change the ideal fueling at the sensor's reported pressure. Offsetting the map sensor via software only changes what you see, not what the computer (or engine) sees. When tuning, you'd only relabel the y axis by a few kpa on the fuel table and not any of the actual values of the cells. It's like tuning under boost without a boost referenced fuel pressure regulator. The computer doesn't know that fuel pressure is dropping, it only needs to know that more duty cycle is required the higher you go in boost to compensate for the boost pressure fighting against the fuel pressure. The computers only know what they need to know. And as long as the end result is that the engine gets the required fuel, it really doesn't matter how the computer calculates it. The map sensor offset in this case did nothing but make him feel better.. Which is fine, it's just unnecessary. I typically consider 100kpa to members atmospheric pressure. Anywhere in there is close enough. But the engine's volumetric efficiency does not change much between 85kpa-100kpa.. the 3kpa offset at WOT is a very minor issue. Think about your own car. How much of a power boost do you get between 7/8 throttle and full throttle? Meanwhile, in my supercharged k2500 Silverado, I can cruise at 75mph at 11% throttle. The difference in my volumetric efficiency varies 1%-4% from 85kpa to 100kpa from 500 to 6000rpms. My 1992 c1500 Silverado changes less than that. And that's 15kpa. The narrarator is piddling with 3kpa. There won't be a difference if he installs a new sensor and it is reading 96kpa without the 3kpa offset. The engine will run the same. An engine can run on a very wide range of air:fuel ratios. It will typically make peak power around 12.5:1 but can go 17:1 or leaner at light cruise to save fuel.. but the chemical formula to burn all of the fuel and air molecules is 14.7:1. When the engine is cold, it can run as rich as 9:1 to aid in warmup because the engine needs more fuel when it's cold. Think of it like a choke feature but with fuel injection. I know i was all over the place with this response, but I'm trying to share why I think the map sensor offset won't matter to the engine.. even if it's a variance in the sensor and he changes the sensor to one that reads "correctly".

@@EricErnst THANKS FOR THIS.. I do appreciate your well thought out reply.. I learn so much from the comments here.. I find this quite cohesive, not really "all over the place" and I admire your lucidity here. 🤓🤓 Looking forward to Jimbo's response, if he has one..

Basically you'll tune fuel flow and timing to whatever valve the map sensor gives. The only way you'd create a problem is if you changed sensors that suddenly yielded a different output voltage for the same pressure as before

@@ronniedale6040 I'm not quite sure how he'll tune his timing table. I suppose he could tune it on the dyno. I'm not aware of a knock sensor on a small single cylinder engine so there's no real way to tell if it's getting close to knock. That, and the valvetrain or cam or rotating assembly noisy and give false knock readings on a knock sensor if he fits one to it. I'd like to see the timing table optimized. I feel that will have more of an effect on the way the engine runs than a map sensor that reports 3kpa low. It took me a long time to set mine, but i believe it's perfect. I tuned for maximum vacuum at idle and it never reports knock retard while cruising or under wot. I added anywhere between 4⁰ and 22⁰ of spark advance from the factory settings throughout the spark tables on my 1992 tbi 350 c1500. I was more aggressive on my 1990 k2500. It runs 31⁰ of timing at idle and 38⁰ @ 2900 @ 100kpa. I pull 1⁰ of advance per psi (~7kpa) of boost. That's on a small block v8. I'm very interested in Jimbo's concrete mixer engine.

This is a well thought out and articulate comment.. Your English is perfect.. Hopefully JIMBO OF ROBOT CANTINA will have another video out this weekend..😊😊

Have you seen the video that just dropped today.??.. Love what you are doing at ROBOT CANTINA , jimbo!

Interesting, I have to see if that is a feature for Speeduino. Of course I don't have a cam sensor ...yet. Keep in mind, Speeduino is based on an 8 bit microprocessor running at 16 Mhz. It works, but has limitations.

Microsquirt’s pretty cheap if not

@@MegaMyk777 Enthusiasm is the engine of success.

Me too, I hope he has another video out this weekend.. 👍👍hopefully.

@@ocdman202 Have you seen the video that just dropped today.??.. Love what you are doing at ROBOT CANTINA , jimbo!

YES me too💖💖💖💖

@@ocdman202 Yes... affirmative to this..

Really?? What is your favorite episode, if I may ask??🧙‍♂️🧙

@@mommapanda5736 I always like the current episode best.. I also like to see him opening boxes for the big reveal of what is inside.. LOVE THE CHANNEL 💖💖💖💖

Hopefully JIMBO OF ROBOT CANTINA will have another video out this weekend. 👍👍

YES,. To fight club, not to mention it but MISCHIEF, MAYHEM AND SOAP the toughest little gnome would have an alter ego that would fight him.

@@mommapanda5736 Momma , I know I shouldn't talk about it but that is one of my fav.. movies.

@@mommapanda5736 Momma do you know anything about the 670 V twin engine???🚙🚙

The purpose of the EFI is so we can do something different and try a supercharger.

@@robotcantina8957 ok, but what kinda monster engine could you make with both performance parts AND a turbo?

Yes, me too... They 🧙‍♂🧙‍♂🧙‍♂ seem to prefer the 10mm ones.. What do you think they will do next??🏕🏕

@@ocdman202 The one that is missing an arm should work as a one armed paper - hanger...

@@mommapanda5736 One armed paper hanger that is funny🧙‍♂🧙‍♂🧙‍♂😊😊😊

@@ocdman202 Hopefully not break the car!

Momma, I sure hope there are not into stealing gas⛽⛽⛽⛽!!!

Dead pan!! I thought it was hilarious... I am not sure if all the gnomes are dead, however..🧙‍♂🧙‍♂🧙‍♂🔧🔧🔧

What do you mean, are they after the gas now??⛽⛽⛽

These videos really can be hilarious... JIMBO OF ROBOT CANTINA usually has a video out on the weekend.. we shall see... 🚙🚙🚙☺☺

@@ocdman202 Have you seen the video that just dropped today.??.. Love what you are doing at ROBOT CANTINA , jimbo!

Sounds like a good idea to me.. Hopefully a new video will be out this weekend. YES to snowmobile engine🏂🏂

@@ocdman202 Yes.. good idea.. HOPEFULLY JIMBO WILL HAVE ANOTHER VIDEO THIS WEEKEND..

That is a really neat concept.. I think another video of JIMBO AT ROBOT CANTINA comes out this weekend.. Maybe they will take up with audience questions like this one.. 😊😊

@@ocdman202 I hope so... He is a genius..