S3 Quattro Swopped Ford Escort Ep13 Adjusting the Sills And finishing off the Rear Drivers Tub

Рет қаралды 5,087

Жыл бұрын

Been A While In The Making With This Episode, Finally Removed Most Of The Underseal, Shortened The Drivers Side Sill/Rocker And Finished Off The Driver Rear Wheel Tub.
Hopefully You Enjoy This One Guys, Its Definitely Been Nice Jumping Back Into This Project After Taking A Few Weeks Off From It.
Full Steam Ahead Now!
If You'd Like To Support The Channel Then Please Feel Free To Check Out The Below Amazon Affiliate Links, Any Purchase Made Via These links Will Give Us A Small Commission And As Tesco Says, Every Little Helps...
All Linked Products Are Used By Myself An recommended.
Milwaukee tools
amzn.to/3ngbS5G angle grinder
amzn.to/3HoPQEH 3/8 Impact gun
amzn.to/3NGZO8z Drill Set
amzn.to/3oVBPYL Die Grinder
amzn.to/4248xp0 Bead Roller
amzn.to/3Lf1DXn 3 in 1 metal machine
amzn.to/3oIY5F1 Hammer and Dolly set
And As Always, Thanks For Watching.
#fastford #ford #performanceford #retroford #projectquattscort #fordescort #audis3 #chassisswop #metalfabrication #welding #grinding #milwaukeetools #metalwork #builtnotbought

Пікірлер: 35

@stephengirling7859 Жыл бұрын

Well impressed with that work Terry.

@GeorgeEI7KO Жыл бұрын

Nice work Terry. She's coming along mate.

@robmoot Жыл бұрын

that multi tool makes it so quick and clean, good work!

@Tdevil86 Жыл бұрын

It does indeed, it’s great for small areas but I wouldn’t recommend trying a whole floor pan, the noise from it being on a bare shell is ridiculous aswel lol

@marklittle6522 10 ай бұрын

Mad skilz ! What a job your doing , canny wait to see it finished ✅

@Tdevil86 10 ай бұрын

That makes the 2 of us, it’ll be a good day when I finally get to turn the key and fire her up!

@121koinickosborne4 Жыл бұрын

Mega job Terry!! Always look forward to your progress!!

@Tdevil86 Жыл бұрын

Thanks nick, glad your enjoying it dude, il do my best to keep regular updates coming

@scottbikerdude4337 Жыл бұрын

Good progress terry 👌🏻

@paulriggers1558 Жыл бұрын

cracking job young man, + that multi tool works a treat, good progress

@Tdevil86 Жыл бұрын

It’s great for whipping the underseal off in small doses mate, but my god is it loud when it’s echoing off a bare shell, definitely need some ear protection when using it really

@trickydickydoudlebug Жыл бұрын

Well done! Looking good.

@denisfitzgerald3474 Жыл бұрын

Great progress, really enjoying all the fab work. Inspiring me to do something similar 👍👍👍

@Tdevil86 Жыл бұрын

You should definitely have a go man, it’s good fun and you’ll learn a decent amount by having a go yourself

@trevorwoods2580 Жыл бұрын

Another great video Terry and some really great work done you are flying through it.

@Tdevil86 Жыл бұрын

Thanks Trevor, I’m really enjoying it to be fair (not the underseal removal though lol) hopefully I can maintain a steady pace but I think when I need to start buying stuff that’s when it’ll all slow down unfortunately

@trevorwoods2580 Жыл бұрын

@@Tdevil86 yea and no matter what you go to do now it costs a fortune. Only thing is the car is going to be class when you get it finished.

@Tdevil86 Жыл бұрын

I know, it’s crazy atm, can even grab a bag of shopping for less that £80 lately lol

@paulpobsanderson6219 Жыл бұрын

Be shearing sheep next 😂😂

@sbkpeace.24 Жыл бұрын

I could not believe the title when i read it 👍 epic build/idea 👏

@Tdevil86 Жыл бұрын

Thank you buddy, I can’t wait to get it all finished up and thrashing around some tracks

@sbkpeace.24 Жыл бұрын

@@Tdevil86100%, I'm looking forward to following along And binging the previous episodes 👍

@Tdevil86 Жыл бұрын

Plenty more to come on this old thing yet, it’s definitely going to be a while until it’s fully finished, unless I win the lottery of course lol

@stephenbradley5805 Жыл бұрын

Multi tools are also good for removing bonded car windows

@Tdevil86 Жыл бұрын

I’m not sure I’d want to try that with the vibrations, I’d be worried the glass will shatter haha

@dhes2809 Жыл бұрын

Another mint video mate. I would honestly get some ear protection though with the amount of grinding your doing.

@Tdevil86 Жыл бұрын

Thanks mate, I have got some ear plug things now that Iv been using this past week as it goes, could do with some ear buds though really so I can listen to some tunes while working away, get a little boring singing to myself in my head lol

@Bigcountry1099 Жыл бұрын

Watch Street Bandito. He has some good tips.

@Tdevil86 Жыл бұрын

Funny you should say that, I just caught one of there episodes last night, il watch through some of there other stuff over the next few days 👌🏼 been watching rusty weld fab and easy composites recently which has helped me learn abit about mould making etc, I can’t wait to give it a good to be honest

@stephenfloat1260 Жыл бұрын

You probably need anti vibration gloves

@Tdevil86 Жыл бұрын

A pair of those would have been great to be fair

@miketucker7466 Жыл бұрын

I found a better quality multi tools make less noise and are less vibrating in the hand

@Tdevil86 Жыл бұрын

The main noise issue was once it touches the shell, the shell just helped bellow the noise out, after 10-20mm or so my ears wer ringing like I’d been at a concert (should have been wearing ear protection really) but yeh, my Milwaukee multi tool I use at work is definitely easier going on the vibrations through the hands!

@miketucker7466 Жыл бұрын

@@Tdevil86 it’s horrible job how ever you do it - every time I say never again!

@Tdevil86 Жыл бұрын

Haha, I going to try and stick to my word on this one, it probably wouldn’t have been so bad if I’d knocked it out over a couple of full days, but a few hours every night for a couple of weeks killed me lol