The old generation 380 looks a lot better than the buddy versjon👍🏼👍🏼😮😮
@westhobbiesrc8051 Жыл бұрын
I think so too! It’s a great looking heli!
@mathiaschillisplash8997 Жыл бұрын
@@westhobbiesrc8051 i have the same heli😁 but i wonder if you know how i can drag the tail gain down om the msh program with the ikon reciver, the line is grey so i won’t be able to drag it to the left or right :( i fly a goblin 570 and the tail gain is a little bit to high.
@westhobbiesrc8051 Жыл бұрын
@@mathiaschillisplash8997 I run my tail gain in the radio. I never use the tail gain in the iKon.
@mathiaschillisplash8997 Жыл бұрын
@@westhobbiesrc8051 understanding, but do i need forward programming to run tail gain in the radio, or can you say step by step where i go in the radio to find tail gain, is it in gyro or something
@westhobbiesrc8051 Жыл бұрын
@@mathiaschillisplash8997 what radio are you using?
@jigglypuff4227 Жыл бұрын
Welcome back
@westhobbiesrc8051 Жыл бұрын
Thank you, now I just need to fly it!
@luckylegacy13 Жыл бұрын
So I tried your way of putting shafts in a drill to check them but I'm finding even brand new shafts show a slight wobble in a drill. I'm not sure a standard handheld drill spins true enough. It's either that or the 2 brand new 380 shafts I got yesterday came pre bent. Have you tried that on any new shafts and found the same thing?
@westhobbiesrc8051 Жыл бұрын
So depending on your drill the chuck can not be true but if you can put a good drill bit and it spins perfectly straight then you know the shafts are bent but if the bit walks or wobbles then it’s the drill. I know my chuck is perfectly straight.
@luckylegacy13 Жыл бұрын
@WestHobbiesRC I tried 2 different drills and one is almost brand new so ya think two brand new 380 shafts have a wobble? Sab quality control fail?
@westhobbiesrc8051 Жыл бұрын
@@luckylegacy13 anther way to test and know 1000% if the shaft is bent is roll it on a peace of glass. I’ve personally never gotten a bent SAB shaft but it could definitely happen. I have got a 300 CFX shafts that where bent out of the bag.
@Lance57H Жыл бұрын
A bit unrelated, but what's your favorite battery connecters to run?
@westhobbiesrc8051 Жыл бұрын
RCpro S7 for sure. I’ve been switching all my helis over to them.
@Lance57H Жыл бұрын
@@westhobbiesrc8051 what's the difference between the S7 and the S6? Is it just a size difference I imagine? I know the D ones are a lot different and they're also some triangle ones. However I can't really see the difference between the s6 and the s7
@westhobbiesrc8051 Жыл бұрын
@@Lance57H the difference is 1mm. The S7 are 7mm and the S6 is 6mm. I always use the S7 as I run a lot of 12s setups.
@Lance57H Жыл бұрын
@@westhobbiesrc8051 okay, so with that being said, could I run 8s without too many issues with the s6?