Thank you for the corrections and thank you for making such an outstanding product !

Thank you for answering the barrel notch question. I just picked up my TRG22a1 in 308 and the reason for that notch has been driving me crazy 😂 Also fantastic review @xring

I hope this becomes more frequent….learnin my sakos and see why there loved…👊🏻🫡

Is it true that the barrels are no longer threaded in?

That thing is awsom, but i see alot of the tik tac a1 in it with some things on the tikka tac a1 that in my opinion is better.

IMO for the money, you can't buy a better rifle.

I have a TRG 22 about 10 years old. One of the more accurate rifles I own but my Remington 700 PSS runs circles around it all day. My R5 is another in my collection of many. Only accurate rifles are interesting

Runs circles around it? Fool

I’m a Sako/Tikka fan as well. My T3 tac a1 in 6.5 is beautiful. I’m also fortunate enough to have the t3 arctic in .308 too….😍😍😍👍🏻👍🏻 🇫🇮

6.5 is the trendy way

Dime groups at 500 i’m calling BS

@@thegreatdays3756 Whatever makes you happy. Reality doesn't change. No wind and stable ideal temps=possible groups. To be fair 500 groups are very few, I should've clarified that. I'll give you that one.

Thank you deerslayer ! 👍🏼

Thank you Joaquin! You as well sir.

​@@XRINGthe barrel is threaded into the reciever but threaded on extremely tight.

Glad you enjoyed it Walter!

.....good luck with that, supplies are limited for a reason.....guess at that reason/reasons

Wasn't Sako previously a part of Nokia phones ? Manurhin is now a Beretta holding , and has more money for production and distribution . The product is better than ever . If you research the ownership of companies , most have had many transitions .

@@npet6842buttretta has only made Sako, so far, alittle for the worse,......so far,.....definitely tieing Sako's hands & charging customers WAY more than Sako EVER would have along with making C.S. for the worse aswell, but, go figure - who has bought & paid them out......If you do the research - world-wide transitions taking place in the ammo/firearms industry are definitely for the worse with quality, but, more importantly, "control".......hhhmmmm....I smell agenda-rats.....you?

@@ericrumpel3105 There's no quality reduction in a 42 A1 or a MR73 . Beretta has owned Sako since Clinton was Pres .

@@npet6842 The last 6 Sako's I bought are the 75's in 1995, a couple of Mdl 995-TRG-S' in .338 LM in 1996, & a couple of 42's, one in 2003, one in 2014 it is obvious the engineering has been geared for "profit first" with the materials first deprived....especially for the falsely inflated price, & now with the discontinued S20, which is no wonder, with the piss-poor inconsistent feed issues,....I'm left to wonder what crap is next.....aluminum receivers.....lol.....would be just like these companies to pull that junk on us since the same schmucks own them all, look at Steyr junk,....you can tell the Original Blood no longer exists in companies by how the firearms are becoming cheaper & cheaper built, subliminally marketed, & charge brothel-prices ....again - I smell agenda-rats.

​@@ericrumpel3105di chiama Beretta!!!

......Thank buttretta for that......

They did the same with Tikka, spare 3 round plastic mags were $80 so I waited like 15 years to get one for $40. 😂

Thanks TX! It will be fun and that’s all I can ask.

An M10? Nice. Hope it lives up to the hype.

@@BattleshipSailorBB63 NYPD also bought M10 TRG rifles. Canada, Estonia, Finland military and many other has bought M10 rifles. I would love to see Accuracy International vs Sako TRG M10 side by side on KZfaq 😎

It’s more about the shooter rubes.

It’s more about the shooter

.....TOTALLY AGREE - & that's what I am talking about with the "monopoly" that has bought Sako out aswell as MOST of the world's ammo/firearms companies, yet, they remain secretive with a cover name......the "Old" Sako would never have left anything leave the factory like that & wouldn't have even charged those ridiculous prices, not too mention - create this phony "shortage"/"hard to get" crap in today's readily available world "causing" the high prices......ya right !!!! - I am with you - I won't give them schmucks my money, I much rather give it to American companies still making it here which shoot just as good if not better with easy access to Customer Service. I have always appreciated the quality & business with Sako, but, not since they were "bought-out".

Yep, I went with GA precision for those reasons. They told me if I can t shoot, buy a ruger or savage, I’d shoot the same.

I am scared to look at the price

And you never advised them about it to rectify the issue? If it smells like a 💩story, it is

@@HWG-wm8ld Anyone who feels like shit every story smells like shit!

The TRG ammo was very consistent.

Until highpoint makes a bolt gun

....probly be the best money you ever spent......

Tikka is their Toyota if sako is Lexus.

Thanks Derek. I appreciate the compliment.

The one I have is one of the most accurate rifles I own. I hate I don’t have the ability to change calibers but it is more accurate than my AI. I have always recommended the Tikkas as well. They are both great rifles. Thanks for watching and commenting.

Especially since the quality is not so great!

There is a Glock mag converter

Government money is free, created out of thin air, gets its value from the money in your pocket.

You are going to like the Garmin.

Yes exactly. Sako now sells pre-threaded cold hammer forged prefit barrels anyways. No need to the Accuracy Accuracy International style 'barrel change' system. In my opinion there is no way those could be made as accurate as a tightly threaded barrel. These tags still rock. The new bs is mostly marketing gimmicks

Hey Zach. I think you absolutely COULD build a rifle just as good for less. However, I was trying to state that that process wouldn’t work for most agencies. Many of them choose to use only factory rifles in unmodified condition for liability purposes. I just didn’t state that! 🤣

I figured you left out some information lol. Because I have a 300 prc build that’ll do sub-moa at 130 yards pretty easily with factory 225 eld-m. Bighorn tl3, Cadex field chassis, preferred 27” barrel and a419 sidewinder. I actually just shot it a week ago verifying my kestrel at 530 and shot 2 on steel .5” apart. My first shot was low thanks to bad vertical input in the kestrel. Had +.5 instead of +.15 for my offset. That first round would have been exactly 2” off the other 2 to the right and that was more than likely me or wind. Either way 2.5” at 500 is good enough for what I’m doing with it.

Ray, he just wanted to tell the world what he “built”.

No buddy I have an example of a build that can shoot and do the same thing this $6k rifle can for less.

Midway USA. I think Sordin owns MSA. Make sure you get the gel cups for them.

@@XRING Hell yea man, thx!

@@XRING Looking into it, MSA owned Sordin, but they got picked up by a Wikmanshyttan Safety of Sweden, I think due to the fact that Sordin is a sweetish company already.

Thanks cliff claven

SubMoa

I was trying out a ZCO for a bit for review. Went back to my Zeiss S3’s 👍🏼

​@@XRINGWhat do you prefer the zeiss z3 over the zco? Have you used Schmidt benders? Thanks for the great reviews

@ryaniam22 the ZCO’s are phenomenal and I have had a couple of them. The glass is some of the best you will ever see in a scope and also one of the easiest to read mirage. I also have had quite a few S&B’s but had tracking issues with many of the newer units. I never had a problem with their older stuff. I like the S3 for the overall package for what it offers as well as the price point.

😂 Not a chance !

It’s being edited

I'm far from a Sako expert, but you mean a TRG-22 in 260? Those are very rare, hang on to that sucker. Only offered briefly, something like 2 years.

Dudes got a Remington 700 with wood stock in 30-06

I got my Sako in the 1980s

@@davidwright5580 Ah! Apologies, my limited research thus far has only led me to the TRG side. Of course their non-TRG offerings should be fine firearms as well.

3 ve 10 30 cıkmak daha avantajlı bence

17:16 5,7 dıyorsunda kardesım benım 2/10 senın hesablamada bır bozukluk var

23:10 neden eklemicem yanı gızlı gorevlerde lazım oluyor ama

24:14 dogru bır karar verdı

31:55 bence bıraz mantık ama taha kaliteli atış yapardım inç dogruda ama metre yukseltımı ıyı ayarlardım

Wake up, you are dreaming

Thanks pogo458!