Anvil Surgery ~ RESTORATION & REPAIR ~ NEW life for an OLD anvil!

Рет қаралды 667,105

5 жыл бұрын

I have ALWAYS wanted to get into blacksmithing, and it all starts with the mother of all shop tools, the ANVIL!
The face / top plate of the anvil had started to de-laminate / separate from the body of the anvil. This meant it needed MAJOR SURGERY!
This anvil has been around since the 1880's or so, and was in dire need of repair on the face and edges.
I also made a base to mount the anvil on, and added hammer slots for easy storage! The anvil mount is made from some black walnut I had in the woods near my house!
Be sure to subscribe and ring the bell if you are new so you don't miss upcoming restorations and build projects!
Please share my videos with others if you think they might like them, or just keep me to yourself! (I won't tell anyone!) If you have any suggestions, questions, or comments, please leave them below!
Feel free to donate towards future projects on my Patreon page Below, I would really appreciate it.
★Patreon★ / salvageworkshop
Follow my Instagram for what I'm up to on a daily basis!
★Follow me ★ Instagram ► / salvageworkshop
#Restoration #Blacksmithing #Anvil
LOTS TO COME!

Пікірлер: 1 200

@SalvageWorkshop 5 жыл бұрын

QUESTION FOR YOU: What do you like about blacksmithing? Thanks for watching, I truly appreciate it! Be sure to hit subscribe if you're new and let me know if you like the videos! Have a great one!

@marty01957 5 жыл бұрын

I like taking an old piece of rusted iron and making something useful out of it. I don't call myself a smith, most of what I have learned has come from youtube videos and 'trial and error'.

@SalvageWorkshop 5 жыл бұрын

@@marty01957 I love that! It's the same for me! Making something from something forgotten or looked over is an enjoyable experience! I am not an expert at anything, and I always say " I only know enough to be dangerous, but MAN am I DANGEROUS!" Thank you for watching and commenting! I truly appreciate the support!

@marty01957 5 жыл бұрын

@@SalvageWorkshop Oh and a brake drum forge is a great way to start heating metal. I have almost four years in mine and it still works great.

@SalvageWorkshop 5 жыл бұрын

@@marty01957 I've got a forge project underway... Look for it in the next few weeks!

@marty01957 5 жыл бұрын

@@SalvageWorkshop Ooh! I'll be watchin for it!

@thomasmiano6358 4 жыл бұрын

Wonderful workmanship. As a boy, a man that was a blacksmith passed on. He taught me how to use the forge. My father had me clean up his shop. The blacksmith built an anvill and stand just like yours but 36" tall. (Yes, the blacksmith was very tall) As payment for the work of cleaning up his shop I was allowed to keep any tools I wanted. Some of the tongs and hammers are over 100 years old. The anvill its self was huge, it took my Father my brother and I to take it to it's new spot. I copied his forge, made of cobblestone. It has a centrifugal blower. It's all still in use to this day. I feel honored. I teach a boy to work the forge, I will pass it on to him. The art of the forge will never die.... Unless we let it.

@SalvageWorkshop 4 жыл бұрын

That is an amazing story! Thank you for sharing it!

@cdubs9918 4 жыл бұрын

I'm not a blacksmith,machinist or even a carpenter. Yet somehow I just watched this man repair an anvil and it was awesome.

@SalvageWorkshop 4 жыл бұрын

I'm glad you enjoy it! Lot's of other videos like it! I truly appreciate the support! Lots more to come!

@simonacuthbert1 3 жыл бұрын

As a guy who still thinks screwdrivers are witchcraft, I'm endlessly fascinated and in awe of the skills and craftsmanship in these videos. I'm endlessly entertained and utterly absorbed when I watch them. Real artisans at work. Fantastic stuff, and thanks for sharing.

@jakubhoranek3007 3 жыл бұрын

This video really wasn't made for blacksmiths, machinists and carpenters.

@franklemka3533 Жыл бұрын

Don’t give up your dayjob

@shortfuse43 4 жыл бұрын

Salvage, being a blacksmith myself, I have used numerous repaired anvil such as yours. You did a wonderful job on bringing her back to life. Your repairs will bode well for years to come. Job well done! Don't be discouraged by the various negative comments I have read which were obviously made by some not familiar with blacksmithing and anvils....

@shortfuse43 4 жыл бұрын

And, that is.....?

@shortfuse43 4 жыл бұрын

@Barry Boppins Sorry to disagree, but there are many, many beginners and seasoned smiths out there who are perfectly happy and productive using repaired anvils. And, for some, that is the ONLY anvil they were able to acquire or afford.

@SalvageWorkshop 4 жыл бұрын

Anvils are CONSTANTLY being repaired!! I am not discouraged by anyone that thinks they can't or shouldn't be repaired then used! Anvils vs ladders, really Barry? Its just a big chunk of metal that you hammer on!

@SalvageWorkshop 4 жыл бұрын

@Barry Boppins Thanks for your opinion Barry!

@MadDog6945 4 жыл бұрын

Wow. That thing is anywhere from 140 to 180 years old. Great job giving it new life.

@rgr3427 5 жыл бұрын

Just found your channel. Great to see more and more people restoring and or repairing instead of throwing away. It shows a respect for traditions and craftsmanship that is truly missed in todays world. Thank you sir .

@SalvageWorkshop 5 жыл бұрын

Old tools were made in a time when craftsmanship, precision, and pride in product actually meant something. I believe that old tools and equipment have shaped the world we currently live in, and I like to preserve a bit of that, and try to inspire others to do the same! Thank you for watching and commenting! I truly appreciate it! Lot's more to come!

@garethbaus5471 5 жыл бұрын

That and anvils are moderately expensive tools that are definitely worth fixing up.

@anvilstudio5279 5 жыл бұрын

These deceptively simple and often forgotten beauties changed our world. Thanks for sharing your incredible work. Great job!

@SalvageWorkshop 5 жыл бұрын

I truly appreciate that!! I totally agree! The Anvil is an amazing tool, I just wanted to do it justice! Thank you for watching and commenting! Lot's more to come!

@bosdad7 5 жыл бұрын

As a welder, fabricator / Blacksmith for over 35 years. it was so nice to see a video on youtube where someone had the skills, took the time and was able to do a REAL restoration. Thank you for making this video. There are FAR... to many hacks on youtube today .

@SalvageWorkshop 5 жыл бұрын

That my friend is a MUCH appreciated compliment, and I thank you for it! I always try my best at everything I put my mind to, but I am no expert at anything! I only know enough to be dangerous, but dang am I DANGEROUS! Lol.. As always, thank you for watching & commenting!

@shortfuse43 4 жыл бұрын

bos dad....you are 1000% right on your comment!! He is knowledgeable about smithing and anvils and did a great job on the restoration.

@lanedexter6303 4 жыл бұрын

Hey, this was great! I have a 140 lb. anvil with similar issues, acquired in late 1970’s but from an old plant that went into service in 1906. Can’t find a name, but the old timer deserves restoration.

@Mika-si5gw 5 жыл бұрын

I'm a young teen and I'm so interested in this stuff. So thank you for the great restoration!

@SalvageWorkshop 5 жыл бұрын

That is so AWESOME to hear! Using tools and equipment to repair things, build new creations, and help others in need has been a life long passion of mine! You don't need the best tools to get started making! Just get out in the garage, down in the basement, or outside in the backyard and start making a mess!! Be safe, but just get started!! Thanks for watching and commenting! I truly appreciate the support! Lots more to come!

@kevinklingner3098 4 жыл бұрын

You do your own anvil like that ever use a good grade hard facing did and pain it well using the ground end of a ball pain hammer. Only ever do and inch or two at a time so that you can well pain the weld. This gives it the extra hardness like the original face.

@johnfletcher6228 3 жыл бұрын

I was a tool maker in Sheffield England, ites amazing to see how you restore all the equipment and tools, good on you mate 🇬🇧

@andrewwilson8317 5 жыл бұрын

You made a real nice job of that. As a rule of thumb the perfect hight of the anvil top is that it needs to be level with your knuckles when you stand next to it with a clenched fist. Any lower and long term use gives a sore back and any higher your hammer blows are less effective.

@SalvageWorkshop 5 жыл бұрын

I totally agree and the way I measured my hammer height will also equate to the height of your fist clinched like you said! Thanks for watching and commenting! I truly appreciate the support! Lots more to come!

@essentialcraftsman 5 жыл бұрын

terrific job on this - salute!

@SalvageWorkshop 5 жыл бұрын

You my friend are one of the true experts, I'm just a man with an anvil! Thank you for watching and commenting! I truly appreciate it!

@krisglenn1830 5 жыл бұрын

I was going to say... If the essential craftsman says good job.... You’re on the right track. Nice work on the anvil from me as well👍

@SalvageWorkshop 5 жыл бұрын

@@krisglenn1830 Much appreciated!! He is much more of an expert than I am!! I only know enough to be dangerous! Thanks for watching and commenting! I truly appreciate the support! Lots more to come!

@Everythings_Adjustable 5 жыл бұрын

You took us on an excellent journey, Lovely looking anvil and stump 👍

@SalvageWorkshop 5 жыл бұрын

I truly appreciate that! Thank you for your support as always!

@kenmenth4305 4 жыл бұрын

Thanks for bringing a piece of history back to life.

@trythinking6676 5 жыл бұрын

Love seeing the process necessary to bring these back into honest work.

@SalvageWorkshop 5 жыл бұрын

I totally agree with you, it's fun to watch! It's a fair bit of work, but it was worth every minute! Thanks for watching and commenting! I truly appreciate the support! Lots more to come!

@speedstick77 5 жыл бұрын

You are way too cool, Dude! Just bought a hefty old anvil in good shape except for being left outside to rust. Thank you for your video.

@SalvageWorkshop 5 жыл бұрын

Awesome!! Congrats on the new Anvil!! Clean that rust off, and put her back to work!! Thanks for watching and commenting! I truly appreciate the support!

@MellowMouseStudio 5 жыл бұрын

Enjoyed watching this, thank you-good idea for hammer holders! lucky you having walnut lying around

@SalvageWorkshop 5 жыл бұрын

Thank you! Ya I have quite a few things laying around! Thanks for watching and commenting! I truly appreciate the support! Lots more to come!

@paulmachak9853 5 жыл бұрын

Thank you very much for rescuing this fine old anvil. You just earned a whole lot of karma points.

@SalvageWorkshop 5 жыл бұрын

My pleasure! Thank Thank you for watching and commenting! Lot's more to come!

@peepers4763 4 жыл бұрын

I didn’t think an anvil restoration would be interesting. I was wrong. Watching skill and ingenuity is always interesting!

@SalvageWorkshop 4 жыл бұрын

I try to make my videos MORE than just a restoration! I am glad you enjoyed it!

@trugath 5 жыл бұрын

I sometimes like to work close to the anvil. You might want to remove a couple of the holders from your prefered side of the anvil. Looks great though, great job on the restoration! I use a side tue and cote forge, I love that style of them. What I Like from blacksmithing is making tools that look beautiful. You can make tools and useful items on it but you can also make them art.

@SalvageWorkshop 5 жыл бұрын

Ya once I start using it, many things will probably change about the setup! I agree with you and can't wait to get started forging tools and other items! Stay tuned, I'll be building my forge soon, I still need to get some refractory and a few other items for it! Thank you for watching and commenting! Lots more to come!

@theropesofrenovation9352 5 жыл бұрын

I had never thought about how those anvils were mounted. Learned something! Nicely done. It was a lot of hard work for sure!

@SalvageWorkshop 5 жыл бұрын

All the work was well worth it, and I'm glad yo enjoyed watching!! Check out some of my other projects, and let me know your thoughts! Thanks for watching and commenting! I truly appreciate the support! Lots more to come!

@chrispainter7093 4 жыл бұрын

I'm putting together my first shop and I'm building everything by hand. I watch everything I can to learn what I can and just recently have found out that there's a actual Blacksmith a few miles away in which I've made arrangements to learn what I can

@5cloudwalker 4 жыл бұрын

As an artist you have a flare for the dramatic with your work it looks absolutely fantastic. Guessing metal fatigue sets in through constant pounding on the metal anvil over the decades. It was a joy to watch😊

@SalvageWorkshop 4 жыл бұрын

I try my best, but I've never really considered myself an artist! yes it took MANY MANY years of use to get this anvil to look the way that is did at the beginning!

@tired1911 5 жыл бұрын

Beautifully done. More a work of art than a tool.

@SalvageWorkshop 5 жыл бұрын

I truly appreciate that!! I really try to be creative while still making sure that it is completely functional as well!! Thank you for watching and commenting!

@RedBeardOps 5 жыл бұрын

That restoration came out great! Solid labor sir!

@SalvageWorkshop 5 жыл бұрын

Thank you! I appreciate you watching and commenting! Lots more to come!

@d.j.9961 4 жыл бұрын

Have you ever watched a video & upon watching said video, Knew in your mind that, "One day, That person would make it big"? You NEED A BIGGER SHOP! You have some NICE EQUIPMENT/TOOLS!!! Tools that many people only dream of having!!! I was considering purchasing a HF lathe just to finally have one. You have earned a sub & can't wait to see more of your video's! BEST LUCK TO YOU!!! I am simply amazed by your collection of tools & now I feel belittled! Old lady gets mad at me for spending so much on tools but, I refuse to not have the tools that I need!!!

@axemanmike4390 4 жыл бұрын

BEAUTIFUL restoration and stump mount! Just bought my 1st anvil (Hay-Budden) & am so excited to restore/mount/use, I can hardly sit still! I'm not a smith (yet), but you have to start somewhere! I've been HOOKED on black/bladesmith vids for years now, now it's time to start gittin' my hands dirty & start moving some metal! I absolutely LOVE restoring old axes & tools and giving them NEW LIFE, as well! It gives me GREAT satisfaction!! Every mark & ding tells a story--if only tools could talk!! 👍 Keep the vids coming and again, thanks for sharing your "dangerous" talent! --Axeman Mike

@lacroix9407 4 жыл бұрын

I don't why, I always loved anvils... there is something unique about this tool by the way, congrats for this wonderful restoration. You got yourself an heirloom with that one. May it serve you well.

@SalvageWorkshop 4 жыл бұрын

I completely agree! Thank you for watching and commenting! Lots more to come!

@sodalines 5 жыл бұрын

like to see you use a big boy shaper to take the metal off the top... great video bro.

@SalvageWorkshop 5 жыл бұрын

That would be awesome to see as well!! If only I had one! who know, maybe down the line! Thanks for watching and commenting! I truly appreciate the support! Lots more to come!

@michaelb4234 5 жыл бұрын

The rings on that Walnut stump 😍 Awesome project, thanks for sharing.

@SalvageWorkshop 5 жыл бұрын

From the woods to my shop! Those rings will be put to good use! Thanks for watching and commenting! I truly appreciate the support!

@az80311 4 жыл бұрын

I admire your attitude and stick to it desire. This is a beautiful repair of the old anvil. I love how you attached it to the walnut and the way you prepred the stump for the anvil. You are just about ready, my friend, to begin making knives, tools or whatever you want. Your video is about the best I have seen. Good luck in your Smithing. Thank you

@SalvageWorkshop 4 жыл бұрын

That means a lot! It was definitely a TON of work, but old tools and machinery deserve it, and I truly enjoy bringing them back to life!!

@coreygardner8424 5 жыл бұрын

Well done, i love the effort that you put in to every thing on this project... including staining the top of the stump

@SalvageWorkshop 5 жыл бұрын

I try to give everything my best!! Thanks for watching and commenting! I truly appreciate the support! Lots more to come!

@johnguenther534 3 жыл бұрын

Salvage Workshop ikkjkjni

@williamemerson1799 4 жыл бұрын

One of the good things about hobby blacksmithing is the nearly endless supply of material you can find to create your projects, often times free. One of the bad things is the cost of some of the tools if you like using the old original equipment. I bought a 134# Peter Wright for $100 about 30 years ago which I thought was a pretty decent price. Prices have gone way up since then. Thank you Forged In Fire! I was gonna ask about the welding rods, but you seemed to have covered that a time or two (maybe you should have put that in the video description). So tell me about your grinding cup. All the ones I've found so far aren't rated for the speed of my 4 1/2 inch Milwaukee angle grinder. Yours? I'm kind of afraid of an explosion like you experienced. And thanks, by the way. Yours is the only video I've seen so far that addresses the face delamination.

@bubbagreensmith7174 4 жыл бұрын

When you started milling it I said that’s what I’m talking about!!! Nice 👍

@SalvageWorkshop 4 жыл бұрын

Nothing like seeing sparks go flying!

@eddyoddrod 4 жыл бұрын

Fine job. I read your response to which electrodes were used. Thank you.

@SalvageWorkshop 4 жыл бұрын

Thank you my friend!

@AlexanderLennox 4 жыл бұрын

Excellent workmanship well done, keep up the sterling work.

@SalvageWorkshop 4 жыл бұрын

Thank you Alexander! I will do just that! Lots more to come, thanks for watching & commenting!

@daveconaway4028 5 жыл бұрын

Looks good. Would’ve liked to seen a rebound test with a ball bearing.

@SalvageWorkshop 5 жыл бұрын

Thank you! Maybe next time I will add that! I appreciate you watching and commenting! Lots more to come!

@Son_Of_Scotland 5 жыл бұрын

Lots of work and beautiful outcome! Fairly simplistic design executed perfectly! Thank you

@SalvageWorkshop 5 жыл бұрын

Thank you! It turned out alright! Thanks for watching and commenting! I truly appreciate the support!

@michaelpair4144 5 жыл бұрын

Could not take my eyes away. Great video.

@SalvageWorkshop 5 жыл бұрын

That is exactly what I am hoping for when I make my videos! Let me know your thoughts on some of my other videos! I'm truly glad you enjoyed this one! Thanks for watching and commenting! I appreciate the support! Lots more to come!

@southronjr1570 4 жыл бұрын

A couple of tips from my personal experience, my first anvil was mounted in much the same way and the things I changed after the stump fell apart after several years of use were 1. The change connectors that connect to the eye screws will need to be turned inside because you WILL catch a knee or calf on it at just the absolute wrong time, like when hurrying to set a weld or what not. 2. Take some fuel line and split it down the middle and place it on top of the hammer holders top edge. No matter how smooth you get them, they will still manage to scar and scrape the handles wearing your hammer handles out prematurely.

@jasonsparks4601 4 жыл бұрын

Yeah i'm just interested in blacksmithing and my first thought was ouch my knees! I'd lose skin on those hooks!

@eaglefree50 5 жыл бұрын

Totally creative, practical and functional for any blacksmith setup. You've brought a piece of history back to life and shared it with all of us who truly appreciate it. Thanks man!!! Really next level stuff...definitely worth a sub to see more. Looking forward to more friend!

@SalvageWorkshop 5 жыл бұрын

THAT"S why I restore tools! The history of what was done or built with old tools is important to me, and I enjoy honoring the tools and people who used them! Thank you for watching and commenting!! I truly appreciate your compliment, lots more to come!

@diannpowell1077 5 жыл бұрын

Very clever indeed! That was pretty cool looking. Thanks for sharing.

@SalvageWorkshop 5 жыл бұрын

Thank you! I truly appreciate the support! Lots more to come!

@budman123052 4 жыл бұрын

FANTASTIC!!!

@polduseri909 4 жыл бұрын

Before restoration that anvil needed a forge. Now needs a nicer matching forge. Good job!

@hermanswartbooi1850 4 жыл бұрын

Welldone sir it was awesome to watch your video again thumbs up.I like your trade make something out of nothing and at the end a masterpiece from scratch,here i dont heard of black Smiths in namibia and its a unique trade

@sambasivaraorao8862 2 жыл бұрын

Perfect restoration you have done a good job God bless you.

@thewillofme 5 жыл бұрын

Love the way you mounted the anvil.

@SalvageWorkshop 5 жыл бұрын

Thank you! I thought it turned out pretty nice!! And it's easy to remove if I ever need to! Thanks for watching and commenting! I truly appreciate the support!

@tommyhill199 5 жыл бұрын

Well done. I really enjoy the more in depth anvil restorations. Thanks for the video- New Subscriber.

@SalvageWorkshop 5 жыл бұрын

I agree with you!! I've watched em all! I tried to show this one from a slightly different perspective! Thank you for watching and subscribing! Lots more to come!

@CA10Z 5 жыл бұрын

Put some bees wax on all lag bolts, screws anything your screw into wood. It will prevent the wood from rotting out from the metal and wood interaction.

@SalvageWorkshop 5 жыл бұрын

Good tip Thank you! I will definitely put it to use!! Thanks for watching and commenting! Lot's more to come!

@DavidTaylor-qn8fe 4 жыл бұрын

For many decades Sanderson of Sheffield, England, had a respectable reputation as toolmakers. An excellent mounting job with all your handtools within easy reach.

@davidrayner2051 3 жыл бұрын

Enjoyed watching this. Great job. I live about 40 miles from where the anvil was originally made.

@billsutherland2128 5 жыл бұрын

Good job on the anvil. I did the same thing, but had to add many boxes of 7018 stick to the face, and finished the buildup with 3 layers of hardening rod (commonly used to re-enforce the cutting edge of snow plows). One thing you forgot to do is let her ring with a good blow with a hammer, and it would be nice to see the rebound of the hammer off the anvil. Very nice video!

@SalvageWorkshop 5 жыл бұрын

You did the same thing I did here! 7018 and finished with hard facing rod! I could have shown its rebound better in this video, but no worries because soon I'm going to be building a forge and then you'll see the anvil in the videos and we'll be able to really judge how well the repair holds! Thanks for watching and commenting!

@johnbutler6774 5 жыл бұрын

@@SalvageWorkshop Nice work, but if I can be a critic, I would have liked to see you chase the crack out more before welding and would recommend peening your welds using a pneumatic needle scaler. Also, post-heating your workpiece or at least wrapping in in blanket is advisable. What hard facing rod did you use?

@SalvageWorkshop 5 жыл бұрын

@@johnbutler6774 I didn't use a scaler or think about it, but I did a TON of peening with a large hammer. I can see maybe having gone deeper with the grinding. I did wrap it in a few canvas tarps as it cooled to help prevent cracking. There were a bunch of things that didn't make it into the video because I wanted it to be short enough for people to enjoy watching! I used Stoody 31 hard facing rod. Thanks for watching and commenting! I truly appreciate the support! Lots more to come!

@mitchellbarr971 3 жыл бұрын

I'm curious of how well the top of the anvil is holding up? I know usually good anvils have a hardened top so there isn't any deformation when hit with the hammer! Did you do some kind of hardening process after because I imagine those spots with all the welds would be significantly softer than the rest of the surface

@moparnut6933 Жыл бұрын

He used hard facing welding rods, when the weld cools it hardens to be as hard as the rest of the face.

@joshuaturner4178 4 жыл бұрын

You see videos like this and you don't quite understand the amount of work that it takes to get to the end of this video all the work that this gentleman put into this anvil shows a lot about his character and how he carries himself through life

@SalvageWorkshop 4 жыл бұрын

Thank you Joshua, I truly appreciate your tall compliment! It was a lot of work, but worth every drop of sweat, because now this old anvil has a new lease on life! Lot's more to come! Thanks again!

@carriesilvinaespinozavilla5177 2 жыл бұрын

This is what built America!

@lordvengerx 5 жыл бұрын

One of the neatest anvil restorations I have seen yet I subbed :D great work!

@SalvageWorkshop 5 жыл бұрын

Thank you! I just wanted to do this amazing tool justice! It turned out pretty nice!

@lordvengerx 5 жыл бұрын

@@SalvageWorkshop You're welcome and it sure did :D

@Moondog-wc4vm 5 жыл бұрын

@@lordvengerx I envy the mill. I have a basic home forge and tools like a pillar drill, metal chop saw, bench and belt grinders and various vices, as well as my welding equipment and so on but a lathe and mill are beyond me. I can crack out a few pieces like brackets, carts, small garden tables and chairs but proper machined pieces are beyond me and it seems they always will be :-(

@zackpack23 4 жыл бұрын

What are the specs for the welding process? Rod used, heat setting etc?

@jaysacco6354 4 жыл бұрын

once your in that deep you cant turn back, you are determined. nice job.

@tonoalvarado1436 5 жыл бұрын

¡Súper genial...! Saludos desde Honduras.👍👏😉

@SalvageWorkshop 5 жыл бұрын

¡Gracias! Te agradezco que hayas visto y comentado! ¡Mucho más por venir!

@PaganWizard 4 жыл бұрын

7:30 am I the only one who thought about the beginning of Rush's instrumental titled YYZ here??? R.I.P. Neil Peart.

@Makermook 4 жыл бұрын

I'm about to do the same to my #2, a beat-to-death farrier's anvil. What filler rod did you use?

@deborahdorazi814 4 жыл бұрын

Use stoddy rod 1105 it matches anvils tool steel plate the. Best and I like this guy it is a hard facing rod that is designed to be pounded on not going to split apart and break on you anytime soon like this one will

@duster. 4 жыл бұрын

Hi from the UK. I'm just an old fiddler, messer arounder but I love restoration vids like yours. I do a little but health and looking after my wife limits my time in the workshop. Great restoration. Subbed.

@robertmanley7556 4 жыл бұрын

Great work ! You took your time and did it right ! Blacksmithing is a true trade of patience slow and steady you cant hurry the work ! What I like about blacksmithing is the ability to make something from nothing ! Great work !

@SalvageWorkshop 4 жыл бұрын

Things worth doing are always worth doing right!! You won't see anything less here at Salvage Workshop! I also enjoy making something from nothing, but its also making something from something else that's cool about blacksmithing for me! Thanks for watching and commenting, lots more to come!

@mrgrumpy5116 5 жыл бұрын

it would have looked more business like with the staples over the toes as it would have been originally, but it looks nice.

@SalvageWorkshop 5 жыл бұрын

I appreciate that! Thanks for watching and commenting! I truly appreciate the support! Lots more to come!

@sandrog2347 5 жыл бұрын

excellent video ... tell me, friend what are the characteristics of that electrode? Thank you

@roadhandviking2741 5 жыл бұрын

Great job and video. You gave new life to a wonderful tool, and did honor to its history.

@SalvageWorkshop 5 жыл бұрын

Thank you! I truly appreciate that!! I can't wait to start making more history with this incredible tool! Thank you for watching and commenting!

@aaronwiederholt8598 4 жыл бұрын

Very kool video, working on getting an anvil that needs some love like this.

@patrickradcliffe3837 5 жыл бұрын

Great resto, just be aware that the welded areas are going to softer then the rest as it had been work hardened for over 100 years.

@SalvageWorkshop 5 жыл бұрын

Thank you! Stay tuned, and we'll see how the repairs hold up! I plan to use this anvil in future videos! Thanks for watching and commenting! I truly appreciate the support! Lots more to come!

@JPFighter93 5 жыл бұрын

Question: did you temper the flat face of the anvil? (in german it is called "Bahn" or "Ambossbahn". Dont know the english word for it) If not: isnt the flat face of the anvil to soft for blacksmithing?

@SalvageWorkshop 5 жыл бұрын

Good question. It would be VERY difficult for me to properly harden and then temper the top of this anvil in my small shop. Instead I used a Hard Facing welding rod to bring the hardness up in the repair areas. Stay tuned, and we will both see how well the repair holds up! I have many plans for projects using the anvil and the forge that I am about to build! Thank you for watching and commenting! Lots more to come!

@nhkenna 5 жыл бұрын

just what I was wandering thanks

@Jethro.Maloku-le.Rey.Kalsitran 5 жыл бұрын

I was also asking myself about the weakness/softiness of the welded parts... As you said : we'll see

@andrewostrelczuk406 4 жыл бұрын

Also as a metal gear head forge fan, I’ve found that the noise of my Dewalt 4-1/2” grinder is music till it sounds like yours in the video... clean it a bit remove the black plastic cover and check the gear for excessive wear... add some grease and purchase the next 7-9-or 11 amp Dewalt on sale... I’m on #6 now having worked each one till the Factory smoke breaks free... there have been some Economy replacements, but hands down Dewalt makes the longest lasting ones in my 30+ years of fabricating stuff, repairing, replacing, welding, mechanic-ing, machining, Blacksmithing, blade smithing, Hobby wannabe!!! Good luck and keep up the great work!!!

@hokepoke3540 4 жыл бұрын

NICE JOB, LIKE THE WAY YOU LEVELED THE STUMP. THANKS FOR THE VIDEO.

@SalvageWorkshop 4 жыл бұрын

No problem! Thanks for watching!

@A_Man_In_His_Van 5 жыл бұрын

Man my back is sore thinking about working that low..

@SalvageWorkshop 5 жыл бұрын

Lol!! You must be a tall man! Thanks for watching and commenting! I truly appreciate the support! Lots more to come!

@A_Man_In_His_Van 5 жыл бұрын

No problem, I'm 6'2" I just like my benches and work surfaces at waist level, it gets tiring and hurts to hunch over all day. I was a GM dealer tech for 20 years, and my biggest Bitch, is the lifts, all day with my stance wide trying to fit under cars sucks. I never understood why lifts only go 5'11" up in the air. It's so hard to work when your head is sideways on your shoulder. The alternative is to sit on an alignment chair but you lose all your torque when you go to loosen a drain plug and slide around on the chair. Like a playground spinner. Lol

@timsmith1589 4 жыл бұрын

@@A_Man_In_His_Van I feel your pain bro, I'm 6'4" and lift designers need kicked in the nuts for not giving them a couple more inches up.

@billallen4793 4 жыл бұрын

@@timsmith1589 6'6" I know your pain!! And I shave my head in the summer and whack it on everything...lol...from Wyoming USA 🔫🤠

@timsmith1589 4 жыл бұрын

@@billallen4793 Washington state here bro and I'm lucky to not smack my head much anymore. Wyoming is a beautiful place bro, I was in Cody a couple of years ago and would love to retire there.

@jeremypointer3392 4 жыл бұрын

What welding electrodes did you use for this project?

@itz_beavis7674 4 жыл бұрын

I was wondering the same. Also my eyes burn thanks for the arc flash warnings..

@kevinklingner3098 4 жыл бұрын

Any hard facing rods Use better quality grade rods not the cheap grades.

@jeremypointer3392 4 жыл бұрын

@@kevinklingner3098 Thank you!

@deborahdorazi814 4 жыл бұрын

Please don’t use any hard facing rod , like this guy did . It will end up spycracking and one fairly soon after using you will have small chunks of hardened steel flying possibly into your body . Stoddy makes a couple hardfscinf rods that anvil magazine did article on how they wirh middle or just decided to choose this particular story ride so that it would match the W1 tool steel plate as well as be made to stand pounding on not just abrasion resistance like most hard facing rods this guy did everything else right this video except for the research into hard facing rods and which ones to use

@deborahdorazi814 4 жыл бұрын

You can’t get arc flash from a monitor

@raincoast2396 5 жыл бұрын

Unique mounting method. Well done.

@SalvageWorkshop 5 жыл бұрын

Thank you! I wanted something I could easily remove, and that worked out well! Thanks for watching and commenting! I truly appreciate the support!

@BrianJaggers642 2 жыл бұрын

Awesome job restoring that beauty!

@me3333 4 жыл бұрын

"In future conversations, you will refer to me as... uh, Mr. Sanderson and I will refer to you as... uh, Mrs. Esterhouse." Caddyshack 2 BTW Nice Work!

@SalvageWorkshop 4 жыл бұрын

Lol... Thank you! I appreciate you watching and commenting!

@oneshotme 5 жыл бұрын

What rods did you use?? Enjoyed and gave a Thumbs Up also

@SalvageWorkshop 5 жыл бұрын

I used 7018 for the buttering / build up layers and the final layer was with hard surfacing rod. Thanks for watching and commenting! I appreciate it! Lot's more to come!

@leesondaryl 5 жыл бұрын

@@SalvageWorkshop I too wanted to know which surfacing rods you used...and would love to see a follow-up on how it holds up compared to the rest of the working surface.

@joeparkes828 5 жыл бұрын

@@SalvageWorkshop you don't need the hard surfacing rod, 7018 are good enough, they are what we call lo-hi's . If you use the hardface rod on top it will make the last layers of weld brittle and they will work harden and crack.

@julianyale4706 5 жыл бұрын

Man I can watch your videos all day.

@SalvageWorkshop 5 жыл бұрын

I truly appreciate that!! As long as you watch, i'll keep making videos!! Lot's to come!

@oldshovel 4 жыл бұрын

Loved the anvil restoration and even more the base you made for it. Great job!

@SalvageWorkshop 4 жыл бұрын

Thank you my friend! No anvil is complete without a base and some hammers!

@xcurrent93 5 жыл бұрын

Nice restoration, glad to see you did it proper. Although it was necessary, i still cringed seeing a angle grinder being put to an Anvil. I must say and compliment you on the videography, it is stellar. For a topic that could be exhausting to watch you kept it lively, entertaining and it kept my attention. It could have been like watching paint dry but instead I actually laughed with your puns comparing it with dentistry. very creative. Well done. P.S. Now that you have a anvil and hopefully a forge. Go and give that angle grinder away. You won’t need it

@SalvageWorkshop 5 жыл бұрын

I appreciate that!! MANY MANY hours are spend editing my videos, I'm glad someone noticed!! Without the angle grinder, this restoration would never have been completed! Yes a forge build is planned, I just need to buy a few more materials for it. It's planned for somewhere in the neighborhood of 1.5-2 months from now! I have a few projects planned first!

@OutdoorFreedomDk 5 жыл бұрын

A forge need to be build. 👍 (New subsc)

@SalvageWorkshop 5 жыл бұрын

AGREED! I have plans in the very near future to build a really cool forge! I'm excited for that project! Thanks for watching and commenting! I truly appreciate the support!

@lesosborne4518 5 жыл бұрын

Great job. Liked your idea with the hammers too.

@SalvageWorkshop 5 жыл бұрын

Much appreciated!! Ya I think the hammer holders really finished it off nicely! Plus its quite useful!

@2H80vids 3 жыл бұрын

Those tool holders round the stump are genius; so, so simple, but genius.👍👌😁

@alanlewis3618 5 жыл бұрын

Wasn’t sure when you started, but a darn fine job sir! Just wondering though, what kind of rod did you weld that top plate with?

@SalvageWorkshop 5 жыл бұрын

I truly appreciate that! I used 7018 for the build up layers and hard facing rod for the final few passes.Thanks for watching and commenting! I truly appreciate the support! Lots more to come!

@get-the-lead-out.4593 5 жыл бұрын

Cavity free? Nope there was still a cavity left there ;o)

@SalvageWorkshop 5 жыл бұрын

Lol, I guess there is still always a possibility, I'm not a dentist! I appreciate you watching and commenting! Lots more to come!

@stevenlally5755 5 жыл бұрын

@countryfolk kinsurvive It was a dental joke. Not describing the void.

@idlabi 2 жыл бұрын

I just scored a 138 pound Peter Wright anvil in excellent condition except for a couple of chips on the horn! Was great to see what can be done with these old buggers!

@jamesthreats5800 4 жыл бұрын

very much enjoyed ,I find it amazing the skills one can amass in a lifetime.Thanks

@SalvageWorkshop 4 жыл бұрын

Thank you James! I truly enjoy that as well! Thanks for watching & commenting! Lots more to come!

@f4dphantomII 4 жыл бұрын

For some reason, I kept expecting to see "ACME" on the side of the anvil.

@tomcarlson3244 4 жыл бұрын

f4dphantomII I was at an auction and there was a acme anvil

@colinperkins8794 4 жыл бұрын

@@tomcarlson3244 how much and how heavy

@lintelle2382 4 жыл бұрын

as in the kind that fall out of the sky???

@mk84ldb 4 жыл бұрын

@@lintelle2382 Purchased by Wile E Coyote at the Acme store

@cannistershot2277 4 жыл бұрын

That's what brand mine is. Used to be sold from the Sears & Roebuck catalog.

@DIYwithUncleCy 5 жыл бұрын

Nice Job. I did this same thing (but did not have a mill) some time ago. Had so many haters in the comments that I disabled comments on the video. If you are going for a coal forge, may I suggest a side blast style one I love mine.

@trisceleforge3982 5 жыл бұрын

i love side blast too, but i think american smiths prefer to be blasted in the bottom :)

@johnlong4987 5 жыл бұрын

Skills Sir.....U have 'em. Very nice work!!

@SalvageWorkshop 5 жыл бұрын

I only know enough to be dangerous! Thanks for watching and commenting! I truly appreciate the support! Lots more to come!

@kjamison5951 5 жыл бұрын

Kudos. What a great save!

@SalvageWorkshop 5 жыл бұрын

Thank you! I am glad to have this old tool back up and usable! Stay tuned and you'll see me beating on it in future projects!! Thanks for watching and commenting! I truly appreciate the support! Lots more to come!

@dennisschaaf8813 5 жыл бұрын

That was a rookie operation with the chain. That the best you can do?

@SalvageWorkshop 5 жыл бұрын

LOL... It's not about best or worst, it's about WHY I mounted it like that. I wanted a quick and easy way to remove the anvil from the base for ease of traveling with it... Not to mention that it also deadens the deafening ring from the anvil when it's being worked at.

@lezlyyoung2217 5 жыл бұрын

haveing a bit age for me it's great to see the young one's having an interest in what our fathers threw away

@SalvageWorkshop 5 жыл бұрын

I have always said I was born 100 years too late, because I LOVE old things that most people throw away!! One of my goals is to interest others in old tools and the trades! Thanks for watching and commenting! Lots more to come!

@michaelpugh4894 5 жыл бұрын

Cool anvil. Awesome fix on the missing material. Beautiful restoration.

@SalvageWorkshop 5 жыл бұрын

It was a fair bit of work, but totally worth it! Thanks for the support!

@derekbond3512 5 жыл бұрын

Great achievement, loved to watch all you did, brilliant.

@SalvageWorkshop 5 жыл бұрын

I truly appreciate that! Knowing that reassures me that sharing what I do in the Salvage Workshop was the right decision! Thanks for watching and commenting! I truly appreciate the support! Lots more to come!

@derekbond3512 5 жыл бұрын

You are actually educating people of the restoration process, thanks mate.@@SalvageWorkshop

@takeaseat6969 5 жыл бұрын

I see you've watched some essential craftsman videos...

@SalvageWorkshop 5 жыл бұрын

Absolutely!! His channel is amazing! I love his content!

@dasMordschaf 5 жыл бұрын

Auweia, ein Pfusch! Mit schweißen eine Hammerbahn auffüllen, na danke schön 😂

@SalvageWorkshop 5 жыл бұрын

Danke fürs Zuschauen und Kommentieren! Ich freue mich sehr über die Unterstützung! Es wird noch viel mehr kommen!

@poorweld7724 4 жыл бұрын

danke, Schaf.

@pkwork 4 жыл бұрын

OK, no more excuses for me -- Now I need to quit watching so much, and go recondition my poor old anvil, and set it on a proper stump! You inspire me!

@Debtfreehomesteaders 5 жыл бұрын

Excellent video. Very satisfying. I love when people breathe life back into old things like you have. 👍 -Will

@SalvageWorkshop 5 жыл бұрын

When I bring back old tools and equipment, it makes me think about the people who used it and the work they were able to accomplish, and I always try to honor that history! Old tools and equipment truly shaped the world we currently live in! i truly appreciate you watching and commenting! If you keep watching, I'll keep making videos!!