Same chain size but they are all different

No video

Same chain size but they are all different

Рет қаралды 220

Күн бұрын

Chains of the same size and type should be the same right? Well, every manufacture has a different idea's about what works best, and we end up with a variety of different chain sizes and shapes in the same pitch / guage.

Пікірлер: 8

@nseric1233 Ай бұрын

This is why people are brand loyal. All those chains will fit and work but some cut better while others stay sharp longer. I never paid any attention to husky 3/8 semi chisel, but I may try some, it's not that rounded so it's likely faster than other semi chisels.

@SawChainTheories Ай бұрын

That's what I'm thinking as well but want to try them for a while to find out. It is very similar in shape to some of Oregon's micro chisel chains but, for reasons I don't understand, Oregon doesn't offer a micro in 3/8. They do in 325 and 404

@elpolaco7654 Ай бұрын

And I thought 91 VXL would be very similar to the N1C (which I don't have). Thanks. You slipped your tongue when you said 35 RM...

@SawChainTheories Ай бұрын

Yep noticed that when it was too late to fix. Old NC1 is close to VXL, that new one is tiny and look like 043

@ChainsawUsers Ай бұрын

See I said that also. Elpolaco I think never believed me. You cant guarantee anything

@SawChainTheories Ай бұрын

Which part, the LP being different or the different semi shapes? 3/8LP is strange with the sizes changing in the same gauge as well as with when changing the gauge. The numbering system for it makes no sense to me either. Add to that the "L" in VXL is for long, but it's kind of short compared to others. It's a complicated size

@elpolaco7654 Ай бұрын

I don't think so. I have always stressed that each type of chain has to be treated individually. They can have different geometries, different kerf widths and so on. That is why, for example, one file size does not always have to be recommended for a given chain size, understood as a pitch and whether it is a low profile type chain. For example, for 90 PX, which is described by Oregon as a narrow kerf, has a pitch of 3/8, a 1.1 mm gauge and is of the low-profile type, a 4.5 mm file is recommended instead of the usual 4 mm for 3/8 LP chains. This does not change the fact that the cutters of "normal" 3/8 or .325 Stihl or Oregon chains are the same. Because they are the same "type", whereas they will differ in the thickness of the drive link to work with different types of guide bars.

@elpolaco7654 Ай бұрын

@@SawChainTheories It seems to me that the VXL teeth are longer than other Oregon 91 (3/8 LP) products such as the VX, P, PX.