Thank you brother!

@@LennyK I love your Gangster Low Rider look of your Heritage Classic👍😎

Thank you!

Thank you! They definitely complete the look and sound great.

Thank you!

Thank you very much! I’ve been looking for them for the 2021 models but can’t seem to find them yet. I will keep looking 😀👍🏻

Oh Thank you :) Enjoy your bike and stay safe!

Yes they do. Exhaust sounds fantastic..

Thank you very much!

Yes definitely. I had a Street Bob and wasn't planning to upgrade, until I saw this on the dealership floor 😃

No tuner required?

That’s awesome! Glad my videos were helpful. Crimson abs pearl is a beautiful color. Good luck with your bike and ride safe!

😂1200 sporty to 114 FLHCS blacked out, feels like I am sitting on a lazy boy😅

2-1 will definitely net more power. I had Two Brothers 2-1 on my Street Bob and it was a great fit for it. But for Heritage, true duals just gives me that old school look I was going for. I am ok with loosing a little power 😀

Thank you!

Yes. Saddle bags are back on the bike! 👍🏻

Thank you!

@@LennyK I'm about to order the same size you got but it's asking 1 7/8 or 2 1/2 what did you go with

@@romeyrome3219 what are you referring to?

@@LennyK You're exhaust you went with 33 length but what's the with diameter. on the website it gives me two options to pick from 1 7/8 & 2 1/2....

@@romeyrome3219 Not sure where you see this but Samson does not mention anything about it. Here is the link: samsonusa.com/shop/new-m8-true-duals-for-softail-33-chrome/

Thanks. Actually all the lights are stock. Haven’t changed any yet. Now, the headlight and passing lights are LED and come stock from the factory like that. The only non LEDs are turning signals and brake lights.

Thank you. 33” are not very long (main reason I got them). They only go about 5 inches past the rear fender.

Thanks. No you don’t have to re-map until the intake is changes. As long as you don’t introduce more air no re-map is needed.

Thanks. I’ll get a tune once I am ready to replace the intake. Don’t really need it with a stock one.

Thanks. Took me about 10 weeks before they were shipped.

@@LennyK Frustrating having to wait so long. I’m sure it was totally worth the wait though

@@gslife1 Definitely worth the wait. Hang in there 👍🏻

Thank you. Yes still the same 2 sensors one per pipe in the front. You can see it in the video when I change them.

@@LennyK thank you for the prompt reply brother! Unfortunately here in our region H-D updated to 4 sensors which is sucks due to the regulations. We can install those exhaust on the 21 models but the check engine light will be on. Waiting for the after market companies to do something about it

@@hssanalsadik9106 That sucks. Hopefully aftermarket tuners will figure out something soon.

Yes they are

Hello again, Another question: are O2 ports pre-drilled for 12mm or 18mm bung?

@@kathyleesawyer5277 I believe they are 18mm but not 100% sure.

Thank you!

Yes there is a little bit more movement on the left side vs. right side because of the bracket placement and thickness. Also, make sure your cross pipe clamp is nice and tight.

It ends in the middle of the fender.

Yes absolutely. 👍🏻

I got in touch with Samson and they sent me the missing brackets (eventually).

At this point I am not using any. Don’t really need to tune anything until I change the air intake.

@@LennyK Hello, Thanks again. The cycle runs and sounds OK without a fuel management upgrade? This is my first H-D with fuel injection. Previous cycles were carbureted Evo and TC 88. When I do upgrade to Samson fishtails, air cleaner will be H-D Scramin' Eagle extreme flow with Zippers Thundermax fuel management. Any opinions will be appreciated. Lots of info out there. ES P. S. A cam upgrade to an S&S cycle 465 gear driven cam will occur in the future.

@@kathyleesawyer5277 sounds like you have a great plan for your bike. As to your question, yes the bike runs and sounds great. These bikes do not run lean, so unless you introduce extra airflow, there is no need for a tune. I will be upgrading to Screaming Eagle intake and tuner in the near future.

To be honest, I haven't been paying attention to the MPG 😂

Hi Kathy. I ordered it through a reseller DCP - Direct Cycle Parts. The part number is S-670-1

Oh and BTW, I also lowered my bike after watching your video on that! After the pipes, I'm putting on hard bags!

Yeah I was able to work around the heat shields, but they are simple to loosen and remove. Good luck with the Freedom Performance👍

I am not 100% sure about diameter of the pipes, but here is the actual exhaust I got: www.directcycleparts.com/shop/exhaust/full-systems/samson-true-dual-crossunder-m8-headpipes-w-33-cholo-fishtail-slip-ons-for-18-21-softail-chrome/

Thank you. It’s HD reach solo seat. I did a video on it as well kzfaq.info/get/bejne/hZuDm7WUl5fcdZc.html

Around $700

Thank you. I don’t think so. New Heritages have a different softail frame.

@LennyK Thanks for quick reply..im going to find out wich 1 I can mount on my baby boy 👶. I love that look and sound,its fucking amazing

@@Leo-Dk thank you!

Here is the link: samsonusa.com/shop/new-m8-true-duals-for-softail-33-chrome/?attribute_set-type=Head+Pipes+and+Mufflers+%28Sold+as+a+set+only%29&attribute_year=2018-2020+Softail+Models

@@LennyK Thanks

Samson is the company that started fishtails. They are one of the highest quality exhausts, and that's the main reason I got them. It's been about a year so far and no problems in quality at all.

Thanks Lenny, you've relieved me. I want to install it myself, it's a very interesting thing. Again, do I need to replace the gasket? Thank you so much.

@@chenwang9232 ​ It's always a good idea to put in the new gasket where the connection of the downpipes are to the cylinder heads. Mine was basically new when I did it so I did not have to change the gaskets.

@@LennyK Thanks brother.

@@chenwang9232 My pleasure

107 and 114 is the same as far as the exhaust goes. They absolutely have it, but they call it 18+ M8 Softail. There is no fitment issues, but you do have to ask them for Bag mounting brackets. Here is the link for exhaust: samsonusa.com/shop/new-m8-true-duals-for-softail-33-chrome/?attribute_set-type=Head+Pipes+and+Mufflers+%28Sold+as+a+set+only%29&attribute_year=2018-2020+Softail+Models

@Lenny K thanks for the response yeah I took the bags and windshield off day one and will never put em back on. I slammed it with air ride and put carlini bars doing a vicla, all blacked out. I'm going to order this today.. thanks!

@@TopShotLLC no problem. Good luck with the exhaust. They do have a bit of a wait for it but I think it’s worth it 👍🏻

Hi Lenny, Just want to double check something: you mention that the saddlebag mounting right-side bracket needs to be specifically requested? Samson didnt simply forget to add the bracket to your parts packet? I perused the Samson accessories section on the web-site but only found exhaust mounting brackets. Would you happen to have a part number for the saddlebag mounting bracket? Thanks again, ES

@@kathyleesawyer5277 Hi Kathy. According to Samson, they do not automatically ship the specific Heritage brackets for saddlebags. So if oyu are ordering the exhaust for Heritage you have to make sure and let them know to include these (two) brackets. Unfortunately I do not have the part number for them, but if you call or e-mail them, explain exactly what you are looking for. They will know what bracket to send you.

Yes they do. They are removable.

I honestly have not. I would not be surprised if there may have been an HP or two loss but I did keep the baffles in to maintain the back pressure to minimize any power loss.

They definitely look good and sound amazing bro. I have a 2018 heritage myself and have been leaning towards fishtails as well. Looking at what's available, I think the Samsons look the best on the new Softail frame. The bassanis sit too low and look odd with the stock bags and guards and the freedom fishtails sit way too wide. That short video you made showing the pipes with the bags convinced me which way to go. Thanks.

Couple hours

@@LennyK Reason I asked was because I had my dealer install ( I bought the header pipes from Samson n chikla upswept slip ons from Steady custom cycles for my 08 flstn with all the parts for installation. Was told everything is on but the mechanic said it was a bear to install. So the parts dept billed so many hrs n now they may need to adjust for more because of more time which don't know as of today. Originally I was told 2 1/2 hours. I still have baffles to install which I didn't know at the time of purchase, that pipes came without n they will be shipped to dealer next week. Let them drill the hole to install. Should I pay the extra $ it took, if that happens or negotiate.

@@peterbergeris6510 definitely negotiate. They quoted, and should stick to the price/hrs quoted. The install is not very hard at all.