Samsung Galaxy S10 Plus Screen Replacement (Fix Your Broken Display!)

Рет қаралды 13,099

2 жыл бұрын

Today I am going to show you how to change the screen on the Samsung Galaxy S10 Plus. This is with the frame, but you can replace it the glass and OLED if you find it cheaper somewhere.
Required tools-
PH000
Metal Razor Blade
Plastic Pick
Playing Card
Some Heat
Patience.
Check out the RWR Discord! - / discord
Support the channel via Patreon! - / realworldreview
Toolkit that I recommend and reviewed (affiliate link) - amzn.to/2EqCvvv
Toolkit that is closest to the one I use for all my repairs (affiliate link) - amzn.to/2H4duIr
**Part can be found here (affiliate link) **
Frame for Prism White - amzn.to/36UVz2c or amzn.to/36NFpYL
Frame for Ceramic White - amzn.to/2TtT8km
Frame for Blue - amzn.to/2Tr6aiz
Frame for Prism Black - amzn.to/36NEJCH or amzn.to/3kHdeCW
Screen Only - amzn.to/2V3c5uE or amzn.to/36X6RmB
The glue that I recommend using (I use the T7000 at 50ml, but B7000/E6000 work as well) (affiliate link) - amzn.to/2GY2cVL
Double sided adhesive I recommend (affiliate link) - amzn.to/2U2eQqv
Clamps I recommend with the glue (affiliate link) - amzn.to/2T8opHn
Dual Temperature Heating "Thing" (Heat “Gum”) (affiliate link) - amzn.to/3hzTUUs
The best type of razor blades (buy 100+ cause they’re low cost and fragile[don’t pry with these!!!]) (affiliate link) - amzn.to/2YE4W17
Playing Cards for easy adhesive cutting (affiliate link) - amzn.to/2JTBJf6
What else should I teardown or fix? Want more Samsung videos? Let me know on here or on Twitter / mattofrwr .

Пікірлер: 9

@dawitabebe5437 3 ай бұрын

Great help!! Thank you.

@SpaceWithSam 2 жыл бұрын

Great video as always!📱

@gypsykat5057 Жыл бұрын

Do I have to take the screen off to replace the function buttons

@shaleem4908 3 ай бұрын

No for buttons, only plug and play. I done it before. For frame change u need disassembly the screen.

@catherinefoy7663 9 ай бұрын

Matt, what kind of adhesive tape do you recommend?

@RealWorldReview 9 ай бұрын

“The glue that I recommend using (I use the T7000 at 50ml, but B7000/E6000 work as well) (affiliate link) - amzn.to/2GY2cVL Double sided adhesive I recommend (affiliate link) - amzn.to/2U2eQqv Clamps I recommend with the glue (affiliate link) - amzn.to/2T8opHn”

@GGgoldspear 7 ай бұрын

Replaced my S10plus phone's AMOLED screen, with vertical green lines that appeared recently with a TFT screen with frame. The phone becomes thicker and heavier the screen sensitivity is a little less so typing needs to be a little slower..even after turning up sensitivity a little higher. There is no finger print sensor..thats o.k..the wake up screen with 2 taps does not work so is screen capture by swipe...but the screen switching off by 2 taps does work. While removing the internal speaker from the original frame..it broke (replacement is about US$2..and battery removal was the toughest and it started with some sparks and smoke!..so one needs to work with eye goggles and near outdoor excess... so an OEM replacement battery about US$10. Another problem that took a long time to solve was when replacing the black wireless charger "flaps"...that looks likebcardboards with some leads the problem was when the contacts were not exact with the screws the charge display shows a temperature yellow triangle because of the battery temperature (??)..and the phone will not charge the battery..so after many tries i left out one screw on the wireless charge flap and the charge problem got solved.😢