That’s awesome! Same here, no issues and handles anything my family throws at it 😁

You’re very welcome! Glad I was able to help 😄

Ooohhh yes! No more door slamming when the kiddos run the laundry 😁

What kind of noise? If it’s like a banging sound when the tub spins, then it could be that the legs of the machine are not balanced.

What kind of noise if I may ask? If it’s a banging sound, then it could be that the legs of the machine are not balanced.

Washer’s been great so far. No issues, just clean clothes 😄!

The installation is pretty straightforward. Attach the red water hose to the hot water line and the blue one to the cold water line. After that, turn on the water faucets and check for leaks. If no leaks, plug in the washer electric wire to the wall power outlet.

At the beginning of the cycle, the tub rotates slowly. During this stage, the washer determines the weight of the load. After that, water should pour in and the cycle starts when the tub is filled up with water.

Sweet! How is it going so far with your washer? Mine is still going strong.

They replace with the “Cleanup” option.

@@jonastriesanything I never saw a clean up option on any of the washers now I have the Samsung washer that came with the wash basket where you can scrub out stains but im replacing it im glad I had a warranty on it

The washing machine weighs 61 kilos (134.5 lbs) 😄!

I think he meant how much the machine holds/does per wash I could be wrong but I want to say that’s something in between 12 kg to 16 kg It’s huge, but it’s hard to have the exactly number

May I ask what problems you ran into?

@@jonastriesanything After 2 years of it started to randomly mess up. When starting a wash cycle it would fill water then drain over and over. Had to disconnect it for an hour. Other times the self lock would also act faulty keeping my wet clothes inside. I’ll never buy Samsung again

It depends on how many wash and spin cycles you set the wash session. To the right side of the knob, you can set the different settings for the number of spins etc.

@@jonastriesanything omg thank you so much!!

Haha, pretty straight forward based on my experience. Reading the user manual helped me out a lot as well as the accompanying mobile app.

Yes, you can personal with this unit. Towards the left side of the power button, you will see a “Pre Soak” button. You can combine that with the “Delay End” setting to your choosing.

In addition, you’ll need to set the “Temp.” setting to “Hot”.

This is 5.5 cubic feet capacity. Handles heavy loads pretty well.

To activate spin only mode, you need to follow these steps: 1. Turn on the washer 2. Set the Load Mode (using the center turn knob) 3. On the menu options (bottom of were the LCD indicator is) you’ll find 4 buttons (Temp., Rinse, Spin, Soil) 4.Press and hold the “Spin” button (the one with the label *Spin Only”) for 3 seconds. This will set the washer to spin only mode. The washer will activate the water suction action (drain existing water) then after that the spin cycle should begin. Hope this helps 😄! And please subscribe!

@@jonastriesanything thanks

Wondering if this is the right model for my washer.

Same! Mine keeps giving errors and is taking a long time to fill and run

Not sure what D4 is 🙂

@@jonastriesanything ya me dijeron que es cuando no entra el agua y es cierto porque no abrí el agua caliente Gracias

Oh, let’s see how long this lasts but it’s still going strong

Cool

Thank you!!!