Samsung Tablet T580 Tab A 10.1 Charge Port Replacement

Samsung Tablet T580 Tab A 10.1 Charge Port Replacement - Best Method

Рет қаралды 90,465

5 жыл бұрын

The charge port on the Samsung Tab A 10.1 (t580) is kinda fragile due to it being micro usb. Luckily it's easily replaceable.
Today we take apart the Samsung Tab A 10.1 and replace the port. The tear down is simple and the soldering entry level.
Want to offer MicroSoldering as a service in your repair shop?
profixerr.com/Board-Mastery
Free Access to our training portal!
profixerr.com/Free-Multimeter-Course
Thanks for watching!
Don’t forget to LIKE, SUBSCRIBE and turn on NOTIFICATIONS!
My Amazon Favorites!
iFixit Pro Tech Toolkit
amzn.to/3dmo89R
XOOL 80 Piece Tool Set
amzn.to/3hPJcsw
MakerHawk USB Ammeter
amzn.to/3fD6cZY
Tools I used in this video:
Work Mat: www.injuredgadgets.com/blue-rubber-work-mate-best/
Screwdrivers: www.injuredgadgets.com/catalogsearch/result/?q=2uul
Tool Kit: www.injuredgadgets.com/ig-toolkit-22-pcs-screwdriver-set/
Pry Tool: www.injuredgadgets.com/nylon-spudger-pry-tool/
Come hang out with us!
Instagram: profixerr
Facebook: ProFixerr/
Website: profixerr.com/
Follow Injured Gadgets for updates!
Instagram: injuredgadgets.us
Facebook: InjuredGadgets
Website: www.injuredgadgets.com/

Пікірлер: 57

@RestorationsFOD 4 жыл бұрын

i don't know if i can trust you dude. looks to me like you suffered a severe electric shock prior to recording this vid!! Only joking. Very helpful advise, thanks

@DaveCarvey 2 жыл бұрын

@profixerr can you provide a link to purchase the replacement micro USB please, to ensure I/we purchase the correct one. I see JNTC J7116 on the original but it isn't a part number I can find.

@scratchoffkinggetmoney9557 8 ай бұрын

Great Video best one i seen make my job easy peasy now 💯

@vgrepairs 3 жыл бұрын

Great video!

@phyllisvogel1561 9 ай бұрын

Great job. 😊

@ricothGS 2 жыл бұрын

Thanks you for this info

@adriaguillon 2 жыл бұрын

@ProFixerr Where can we find/buy the Micro USB connector for replacement?

@mfrraja1 3 жыл бұрын

Hi what is the temperature for the for hot air gun and soldering machine

@mrgringo6859 3 жыл бұрын

Can the charge port be converted to usb type c

@mendysmob 2 жыл бұрын

Is it possible to replace/upgrade to a usbc port?

@chrisg4rr377 3 жыл бұрын

Did you touch a battery and get a high voltage shock?

@ttona3923 4 жыл бұрын

What is the tools you used ?

@abuomaral-namani9089 3 жыл бұрын

Thanks great job well done

@profixerr6275 2 жыл бұрын

Thanks for watching!

@toymanek 3 жыл бұрын

What temperature of HotAir are you using in this case ?

@tassnemmosed5652 3 жыл бұрын

I hope to see a video replacing power key of T585

@junkmail420 2 жыл бұрын

Hi would I be able to solder a c-type charing port to the tab A. Has it ever been successfully done? Or is there something that would prevent it from working properly?

@awpfun 2 жыл бұрын

When I plug my USB power meter in its reading 5.04V and only 0.66A ? Yours is reading 4.99V and 1.51A? Any idea why this is? also it wont turn on.

@Van_City 4 жыл бұрын

Great video, thanks for sharing this

@profixerr6275 4 жыл бұрын

Thank you🙂

@ValerieBognar 2 жыл бұрын

Great video, wish I would have seen this before I bought the part. Not sure if I can solder it myself, maybe my Honeywell soldering friend can help me

@rooferization 4 жыл бұрын

What kind of heat gun are you using?

@desertaip9137 3 жыл бұрын

If I don't want to solder a new connector, is that entire subassembly with the connector on it available?

@bobdobalina838 3 жыл бұрын

What kind of solder is that? Looks clear? Is it conductive or not? Thanx!

@whitedwarf5247 3 жыл бұрын

I think you're confusing his solder with flex he was using.

@joecnc3341 2 жыл бұрын

Liked-Subscribed-Notified. What is the part number for the USB-C replacement port? Where to purchase?

@Privatedata1234 2 жыл бұрын

I need it too please

@user-dl1lx4qz9b 7 ай бұрын

the technique to remove the motherboard isto put a pick underneath the part of the board with the sd card attached then using another pick pry up fron the side behind the sd card to remove the board from the clips holding it . there are also clips on the side by the battery connecter that will probably require prying too.

@glennjacobs2004 4 жыл бұрын

Temperature of solder iron, and hot air? Please advise

@owndbyEU 3 жыл бұрын

What is this gel what you smeared in the beginning.

@aquaroyale Жыл бұрын

Flux

@phonedoctorbrady-phoneande8886 2 жыл бұрын

👏🏻

@KavanMavati 4 жыл бұрын

Can you add wireless charging pad into Tab A 10.1 T515 ? This model does not support wireless charging. i know there is adapter out there require plug into USB-C. But i am looking into more thin wireless adapter that can solder to the board. Reason behind all this hassle is, i will have to install tablet in my car, and this requires power and data. Believe i almost tried all solutions, for power+Data simultaneously. i used OTG with power, lava adapter , root the tablet to modify files...etc. my final solution would be to install utilize onboard USB port for data and wireless charger for power. i appreciate your help.

@Hannan926 3 жыл бұрын

god bro

@SPitBullK 2 жыл бұрын

Motorrad ohne Helm gefahren?)))

@sharonwhittington2859 4 жыл бұрын

My tablwt flickers when plugged in and won't turn on

@profixerr6275 4 жыл бұрын

If the tablet flickers, it might have a screen issue. What is the history/story behind your tablet not working?

@sharonwhittington2859 4 жыл бұрын

@@profixerr6275 it was working fine then i went to turn it on and it went black so i plugged it in and the charging signal came on then it started to flicker

@pooptubesex 3 жыл бұрын

The battery cant charge all the way because the tablet isn't receiving enough power.

@t19s 3 жыл бұрын

Same Problem :(

@DaveCarvey 2 жыл бұрын

@@sharonwhittington2859 I noticed mine does the same thing if plugged into a power source that doesn't provide enough power to the tablet to charge it.