How To String A Pearl Knecklace To Make Money

No video

How To String A Pearl Knecklace To Make Money - Jewelry Repair Tutorial

Рет қаралды 42,155

Күн бұрын

#JewelryRepair #MakeMoney #PearlNecklaceRepair #SideHustle
Hello everyone, this is my very first KZfaq video in a series of videos on how to
repair jewelry, watches, clocks and also how to design and create custom jewelry
pieces. This video is about learning the art of stringing and restring pearl
jewelry. In this video you will see me take a broken 17 inch cultured pearl
necklace with a silver clasp and French wire and restring the whole necklace
from beginning to end. I can tell you from personal experience that I have been stringing pearls and beads for over 10 years and have many customers who reach out to me to repair their pearls. I actually got my first job at a jewelry store solely based on the fact that I had this skill.
Materials and tools used
Beading Board: amzn.to/3iUFRZe
Beadalon needles: amzn.to/34cf7PD
Silk size E string: amzn.to/2Q6wUQc
Beadalon Glue: amzn.to/322KZ6x
Beading Tool: amzn.to/3gcrTQx
Thread Zap: amzn.to/3hbIpRY
Scissors: amzn.to/2Q6zJAw
The best book on stringing out there: amzn.to/2CEi53Y
If you would like to earn extra money learning how to do watch repair I have an ebook available that shows you how to do all quartz watch repairs that you would encounter: www.amazon.com...
Camera Used:
amzn.to/3iT4WDB
Follow me on Instagram: scwatchrepair
Blog: benchjewelerrep...
Facebook: StemAndCrownWatchCo

Пікірлер: 50

@celinesonvaux Ай бұрын

Thank you so much for this video. My daughter has worn her pearl necklace every single day for 2.5 years. She went off to college, and it broke while she was at practice. Because of your video, I was able to repair it for her. We both appreciate you sharing your knowledge. THANK YOU.

@abba1459 2 күн бұрын

Great video! I followed all of your instructions & advice & my opera length, cultured pearl necklace was repaired beautifully! The necklace was passed down to me & needed to be restrung. Since wearing it, I have received many compliments! Thank you so much for your great video!❤

@trip95125 Жыл бұрын

I have to say how wonderful it was to have you reinform me on how to string pearl with the beading tool. It has been so long since I restrung pearls, I had forgotten a few tricks. Thanks again for you great advise. Your voice was easy to listen to, and you seem very knowledgeable. I owned a manufacturing jewelry store in Los Gatos Ca until I was diagnosed with Cancer and had to sell. I employed four bench men, I did all the designing, with a thriving business. I miss It with all my heart, and wish I could go back, unfortunately all my tools, benches and everything that was my life, my family sold, thinking I was going to die in 6 months, hear I am 25 years + still kicking. They stole everything. Except my gemstone collection. If you every want some stones on consignment, I would be happy to send you a selection. My prices are from 1974- 1996, Im not current on gemstone pricing. Good luck on everything you do! John J CermaK III

@SandCWatchRepair Жыл бұрын

Sorry I am just seeing this and thank you and I'm glad you are still here and sorry you had to sell everything. If I do need gemstones I will reach out to you and appreciate it. Thanks

@danihuddi5869 11 ай бұрын

Fabulous video. Great tutorial, enjoyable to watch and thank you for going at a steady pace and not rushing this. Your voice is so clear and exact, caught every word. Im looking forward to getting my pearls out now and restringing and i feel confident to do this. Cant wait to look at your other videos. Again, thank you. ❤

@dearwriter9659 Жыл бұрын

Very recently, my mom requested if I can re-string her broken pearl necklace. While I can confidently repair pearl (costume jewelry) necklaces, I initially declined to do anything on her real necklace. I know there’s a certain technique using silk thread. But through your video, I can now move forward and repair her necklace. Thank you very much for your very detailed explanation. And thank you for your patience. 🙂

@LeNguyen-im8dm Жыл бұрын

I like the French wire attached at end near the clasp, which prevents the silk from breaking.

@amandamak8808 6 ай бұрын

It is easy to break

@denisemurray412 7 ай бұрын

Please stay in frame and have a camera that will 'auto-focus. This was jumpy. The tiny coil of wire at each end of the necklace protects the wire from getting frayed by excessive movement of the metal parts(clasp, findings, beads) and is called french wire. Hope this helps and good luck from a fellow designer.

@gemhunterdesigns 3 ай бұрын

He explained it was his first video recording. Soooo, patience? :) I thought he did great!

@debbiemiller927 10 ай бұрын

Amazing! And thanks for showing how to fix my pearls!!

@atiregramakswoktiw1739 9 ай бұрын

Than you for wonderful tutorial.Very informative.

@kmccormic 2 ай бұрын

Does silk string not stretch? I though you’d want to pull the string first to prestretch it so you don’t end up with gaps in your pearls

@fergonzalez7875 3 жыл бұрын

This vid really really really really REALLY HELP ME A LOT THANK U 👀❤️👌🏻

@ligayaflores2634 2 ай бұрын

Thank you .

@mahvashshadman6292 2 ай бұрын

Thank you

@drjomendeztalks 2 жыл бұрын

Wow, because I’m very crafty I watched this video thinking I may be able to get some supplies to repair a gemstone bead necklace instead of sending it in… now I’m thinking it’s money well spent paying someone to do a quality job on it. Thanks!

@SandCWatchRepair 2 жыл бұрын

Your welcome, you can always send it to me if you can't find someone to repair it.

@vesnahorvat3603 Жыл бұрын

Thank you very much for the detailed instruction! SY VH

@317NEETz 4 ай бұрын

I held out forever not wanting to use a knot tool or French wire. But my pieces just wouldn’t be as professional as I wanted them to look 😂 guess I’ll do it the tried and true method and see how that works

@carinasoria8445 Жыл бұрын

I love it thank you very much I'm going to keep up with your videos

@sahira2525 2 жыл бұрын

The best video. Thank you 😊 👍👍👍

@goldschmidtcompany431 2 жыл бұрын

Aloha from Hawaii Keep up the great work

@SandCWatchRepair 2 жыл бұрын

Aloha and thank you I appreciate the comment

@anneriedelange9863 Жыл бұрын

You mention you use Size E thread, I can only see sizes in 0-14 and 0.3mm - 1.2mm. On that scale what would be a E classified as? Thanks

@SandCWatchRepair Жыл бұрын

0.0128 inches or 0.3251mm

@doloresharris2346 Жыл бұрын

Where do you buy the materials.?

@brookmachatte 2 жыл бұрын

Is the string measurement calculated for the initial single ply before doubling it, adding the needle and knotting?

@SandCWatchRepair 2 жыл бұрын

The calculation includes knotting, I am only calculating the string as needle does not need to be calculated

@brookmachatte 2 жыл бұрын

@@SandCWatchRepair sorry but is the cord doubled when you count it? Or is the 4x +15” a measure of the total cord length?

@dearwriter9659 Жыл бұрын

By any chance, can you please make a tutorial on how to repair those inexpensive watch pieces? I have a couple wherein I like the “shell,” but whose mechanisms have broken down. Some will say: oh just throw them away and buy something else. I believe in repairing and using things until I’m very certain I can no longer use them. 🙂

@SandCWatchRepair Жыл бұрын

Are you talking about repairing the clasp?

@dearwriter9659 Жыл бұрын

@@SandCWatchRepair, thank you for question. Sorry I had not been clear enough. I was referring to the mechanism itself. The whole watch just stopped working even I had replaced its battery. The person at the watch shop to which I brought (my inexpensive timepieces) said you need to replace the entire mechanism. Hmm, I am still hoping I can “fix” them on my own. Any advice? Thank you.

@itfitzme59 Жыл бұрын

I have a old watch that was my grandma’s it’s a wind watch do you fix this kind ?

@SandCWatchRepair Жыл бұрын

Yes, I definitely work on wind up watches

@SandCWatchRepair Жыл бұрын

scwatchrepair@gmail.com If you would like to reach out

@texasceechelle 3 жыл бұрын

I do repair also. What quality brand French Wire is the best? Most of them make me itch. FireMountain has poor quality. A customer wanted gold or gold filled and I could not find any. Thank you.

@SandCWatchRepair 3 жыл бұрын

I usually use sterling silver french wire for the most of my repairs. I've never seen any gold filled or even gold french wire only the brass kind. If a client of mine has a problem with the french wire the I use end caps made out of gold.

@sarasaruzza5579 3 жыл бұрын

@@SandCWatchRepair Hello! Thank you for sharing your knowledge and experience! Where do you buy your sterling silver French wire? I can only find base metal ones! And do you think it's necessary to have different diameters or do you have just one (maybe the 1mm one)that fits all the jobs? Thank you and cheers from Italy! Sara

@SandCWatchRepair 3 жыл бұрын

@@sarasaruzza5579 Hello Sara, I get mine from riogrande.com. Yes, get a number of different sizes. You will notice that you will mostly use one size but every now and then you will get pearls where you will have to use thicker string. Hope that helped

@shelleydyer Жыл бұрын

You can put some of the jewelry shield on any metal that comes in contact with skin to prevent allergic reactions and Etsy has some gold French wire from Patricia Saab designs. Pearls are her expertise and she actually teaches and trains on all things pearl

@abba1459 2 күн бұрын

@@SandCWatchRepair Hi! Can you please tell me what size, in mm, is the French wire in your video? Also, thank you so much for your awesome video!

@TheKsk1997 2 жыл бұрын

Don't you have to glue the last string going through the last pearl ?

@SandCWatchRepair 2 жыл бұрын

No, I never use glue for this kind of job. The only time I use glue is when I have to use end beads

@murgeldanielle4 Ай бұрын

great just filming you need a better set up

@khanhvannguyen7723 Жыл бұрын

@valproton3841 11 ай бұрын

Not professional at all. You should never reuse the French wire, because it gets the most wear and tear, becomes kinked and tarnished. Both on your necklace are not long enough, it's showing the thread through the coil. Professional pearl stringers don't use beading tools or glue, because they know how to knot and finish properly. They also use single thickness pure silk thread the right size that matches the hole, not multiple strands of nylon cord knotted together, because the pearls/beads wont hang right. You can see where you cut the thread, it's sticking out and you only had one pearl on the finishing end, very unprofessional work. Better leave specialist techniques to the trained professionals.

@SandCWatchRepair 9 ай бұрын

Nice flex. at no part am I using nylon string and if you know so much about pearl stringing why dont you make a bunch of videos to show us how a professional is supposed to string pearls.

@sharleenehurst4250 11 ай бұрын

Tip: don't talk like an NPR talk show host. No one likes these droning, monotone people. They are boring, and always a turn off. After about two minutes, i decided to turn off your video and find someone else to learn this from.

@SandCWatchRepair 11 ай бұрын

Thank you for the tip, the reason for my voice sounding like it was on NPR is because I didn't want to wake up my two children who were naping while I was recording. I am sorry that you missed out on a lot of great information that would of produced professional results. Have a nice day.