Sanyo M9994K boombox how to install Bluetooth explained in English

Рет қаралды 4,615

5 жыл бұрын

A simple explanation of how to install Bluetooth on Sanyo M9994K. Please bear with my broken English with heavy Japanese accent.
Original M9994K video
• Sanyo M9994K Cassette ...
Donation welcome!
I appreciate if you fund me for the new camcorder and my next youtube projects. Thank you.
www.paypal.me/teddyhashee358
-------------------------------
Parts on Amazon
USB male/female
amzn.to/2ka2wrD
Socket
amzn.to/2lKj7mn
USB car charger
amzn.to/2lJN5H7
Bluetooth receiver 4.0
amzn.to/2lfqaDp
DC isolator converter
amzn.to/2lJGU5S
Solder set
amzn.to/2lJPGAR
PCB board
amzn.to/2ldgBEE
electric wire
amzn.to/2lJdd53
stepdown module
amzn.to/2lKoRfV
resistor kit
amzn.to/2kcYmiy
6pin toggle switch
amzn.to/2lb9yMM
switch cover cap
amzn.to/2lKrHS7
Japanese calligraphy ink
amzn.to/2ldjyVK
calligraphy brush
amzn.to/2lb9UD6
-------------------------------
Risk disclosure statement
Repairing or remodeling/modifying old electronics is very dangerous. This video is intended for educational and entertaining purposes only. Any actions in this video shall not be a call to repeat them. The author shall not be held liable for any of your actions. If you do, do it with your own risk.
Thank you
Teddy Hashee

Пікірлер: 33

@ManCaveStudio 2 жыл бұрын

I used to own this radio when I was a kid. So nice to see people giving it the love it deserves. It was a great-sounding radio back in the day.

@jasejj 5 жыл бұрын

Nothing at all wrong with your English Teddy - great video, thanks!

@teddyhashee 5 жыл бұрын

Thank you for your compliment!

@yonimmichaeli 5 жыл бұрын

Good to hear you.

@teddyhashee 5 жыл бұрын

Thank you.

@bonsaiglaucas8001 5 жыл бұрын

Thanks hashee, this explains in great detail. Best video on KZfaq

@teddyhashee 5 жыл бұрын

You are welcome!

@RobDunsford 4 жыл бұрын

Fantastic - really helpful - thanks Teddy. I've been converting radios to have Bluetooth for several months but learnt a lot from you in this video. Thanks again.

@teddyhashee 4 жыл бұрын

Hi Bob. Thank you for the comment. I know you can do it!! Go Rob go!!

@RobDunsford 4 жыл бұрын

@@teddyhashee Thanks man! Your video was really helpful getting me started, but I've done it a little differently, mainly so that I didn't have to add another button. (These radios are rare and expensive, so I was worried about de-valuing it). I connected my BT output to where the LINE IN sockets connect to the circuit board, and activate the BT adapter with a spare (unused, unsoldered!) pin on the "TAPE/RADIO/PHONO" switch (activated when in PHONO mode). In PHONO mode the radio stage isn't activated (so no need to mess with that), and you just need to ensure you're in LINE (not MIC) mode, with plenty of INPUT LEVEL (8 is good). (These last 2 settings can be left like this, so no need to fiddle with the settings every time you use BT). Thanks again Teddy - your video was so helpful in getting me started.

@adrianfox9431 5 жыл бұрын

Thanks for the video! Very useful.

@teddyhashee 5 жыл бұрын

You are welcome!

@adrianfox9431 5 жыл бұрын

@@teddyhashee Your English is perfectly understandable. Would you consider making a more general video on boombox restoration with hints and tips?

@teddyhashee 5 жыл бұрын

@@adrianfox9431 Hi, Adrian. Thank you for your compliment on my English and explanation video. I may try to make hints and tips video in the future.

@hamodachichigo8029 5 жыл бұрын

Thank you A lot sir !!

@teddyhashee 5 жыл бұрын

You are welcome!

@bobbygermano9926 5 жыл бұрын

LOVE IT TEDDY!!! LOVE IT!!

@teddyhashee 5 жыл бұрын

You are welcome!

@RegiPavan 5 жыл бұрын

Nice tutorial

@teddyhashee 5 жыл бұрын

Thank you!

@jerrychan121 5 жыл бұрын

thank you very much !goog job!

@teddyhashee 5 жыл бұрын

You are welcome!

@MicSokol 5 жыл бұрын

You can eliminate the ground loop problem and simplify the design by just adding a 5v phone charger to BT. Anyways, thanks for sharing, your English is very good.

@teddyhashee 5 жыл бұрын

Connect 120v AC line to 5v phone charger inside of the boombox, I did same thing before and it cleared ground-loop problem as you said. I just did not wanted to connect power switch on the between 120v AC line to 5v charger. If I add switch between 5v charger to bluetooth, then it means 5v charger is always on that will shorten the life of the charger,... etc. But your opinion is right, it totally clear the ground-loop noise. Thank you for the comment.

@crowblunt536 5 жыл бұрын

First time i ever heard your voice

@teddyhashee 5 жыл бұрын

It is a first time for me too to talk in the film.

@neon9189 5 жыл бұрын

Great tutorial Teddy! I have had problems with finding tuner connections that control treble and bass. When I find tuner connection, I can't control treble and bass.

@teddyhashee 5 жыл бұрын

I am not sure the problem you are encountering right now, but I do recommend to test and search more about it. If it is not from the wiring, then you maybe need to change the capacitor, etc...Hope you will be able to solve the problem.