Saphrox Studios - Guide To Logic Pro X - Space Designer Pt 3

No video

Saphrox Studios - Guide To Logic Pro X - Space Designer Pt 3 - Speaker Simulation

Рет қаралды 5,165

5 жыл бұрын

Saphrox Studios proudly presents Part 3 of their guide to Space Designer found in Logic Pro X.
Space Designer is incredibly powerful, and is also Logic Pro X's only Impulse Response loader.
This tutorial continues where Part 2 left off, and demonstrates how Space Designer can load Impulse Responses that can be used to run Guitar Speaker Simulation.
We use a Revv G4 distortion along with Logic's Amp Designer, but replace the speaker simulation with Space Designer.
We also load an IR from Celestion.
www.celestionplus.com/free-do...
Please also check out our other 2 videos on Space Designer:-
Part 1: Introduction to Space Designer and how to use it to produce reverbs.
Part 2: We look at using Space Designer as an EQ, all created via Impulse Responses (IR's)
Saphrox Studios offer professional one to one guitar tuition in South West London, and also online through their web lesson service.
For more videos and information please visit www.saphroxstudios.com
#SaphroxStudios #LogicProXTutorial #TipsAndTricks

Пікірлер: 23

@GabrielPerboni 5 жыл бұрын

Hey man, you were given great tips here! Usually KZfaq is a bunch of videos saying the same useless stuff over and over again, but yours are good creative tools, thanks. I hope you keep doing it!

@SaphroxStudios 5 жыл бұрын

Cheers buddy. I’m glad you find them useful.

@StratsRUs Жыл бұрын

This is a great tutorial.Perfectly paced and presented.Thank you

@bingefeller 4 жыл бұрын

Great video! I use Space Designer to audition different IRs with my GT-1000. The GT-1000's IR loader is very slow, using Space Designer is way quicker.

@skelton9204 4 жыл бұрын

Thank you! Very useful!! Thanx again

@semyonboyk0 4 жыл бұрын

Thanks a lot, that was very helpful

@whymyheadwouldsquash 3 жыл бұрын

Great video my friend.. i only just recently discovered the whole Impulse response realm and very excited to use them for future home recording projects. 👍

@MonsieurVersatile 5 жыл бұрын

Good vid cheers. But viewers should know you can get the speakers etc straight from the presets menu at top left under Warped Effects. No need to get into loading responses.

@SaphroxStudios 5 жыл бұрын

I realise that I didn’t mention the drop down on this video. It’s an overlook on my part, but the menu was shown in part 1 and part 2 of the video trilogy. I did however want to show how to load IR’s as I wanted viewers to understand they can load custom IR’s using a stock IR loader found in Logic Pro X. I also feel, though must admit that I didn’t say this in the video, but the Apple Speaker IR’s are most likely the same IR’s found in Amp Designer, so if the user wishes to load the Apple IR’s, they might as well use AD with the amp sim turned off.

@maxtishin6764 4 жыл бұрын

creat! great! Great! Thanks )))

@mdenison2567 3 жыл бұрын

Great video, I have a question.... has ANYONE managed to find a list of what logics ( I think 21 in total) speaker IR s are meant to be imitating? I have looked all over and cant find any info, just keep finding lists of the Cab sims in Amp designer. any suggestions would be very much appreciated

@SaphroxStudios 3 жыл бұрын

Sorry Matt. That I don’t know.

@mdenison2567 3 жыл бұрын

@@SaphroxStudios cheers for the response mate, and now worries it seems no one does :P great video thanks again

@victorpinto9199 2 жыл бұрын

Hi. Nice video. I've made a comparison between Space Designer and NadIR (STL Tones) using the same cab simulation file. It sounds different using Space designer. Do you have any tips about how to set the different knobs in Space Designer? One thing that I notice is that my wet must be in 100% and dry in 0%.

@SaphroxStudios 2 жыл бұрын

I don’t have a reason, but… Yes. 100% wet, and check EQ settings. The NadIR may be eq’d and not be flat, so you may have to sculpt the EQ to match. You could use Match EQ to work the sculpting required and then see if that helps with all IRs cross compared. Good luck

@victorpinto9199 2 жыл бұрын

@@SaphroxStudios Ok. Thank you. I will try it.

@accentontheoff 2 жыл бұрын

Terrific video thanks! Sorry if I missed it but you didn't mention which audio interface you are using here.

@SaphroxStudios 2 жыл бұрын

Thank you. Focusrite Saffire Pro 40

@accentontheoff 2 жыл бұрын

@@SaphroxStudios Great, thanks. So when the distortion pedal was sounding off, that was happening through the Saffire? And then it got fixed by the IR from Logic? That’s incredible.

@SaphroxStudios 2 жыл бұрын

@@accentontheoff pretty much. The full chain is: Guitar - Dist Pedal - instrument input on interface - Logic transparent amp in amp designer with cab turned off - sound designer with speaker iR loaded.

@accentontheoff 2 жыл бұрын

@@SaphroxStudios Great, thanks! :)